projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| feb7838f | 1 | /* |
| 3d7506fa | 2 | * Copyright 2007-2012 Freescale Semiconductor, Inc. |
| feb7838f | 3 | * |
| 1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| feb7838f SS |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * p2020ds board configuration file | |
| 9 | * | |
| 10 | */ | |
| 11 | #ifndef __CONFIG_H | |
| 12 | #define __CONFIG_H | |
| 13 | ||
| ebf9d526 KG |
14 | #include "../board/freescale/common/ics307_clk.h" |
| 15 | ||
| d24f2d32 | 16 | #ifdef CONFIG_36BIT |
| a0f9e0e0 KG |
17 | #define CONFIG_PHYS_64BIT |
| 18 | #endif | |
| 19 | ||
| 1ac63e40 JH |
20 | #ifdef CONFIG_SDCARD |
| 21 | #define CONFIG_SYS_RAMBOOT | |
| 22 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 23 | #define CONFIG_SYS_TEXT_BASE 0xf8f80000 | |
| 24 | #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc | |
| 25 | #endif | |
| 26 | ||
| 21dd9af3 JH |
27 | #ifdef CONFIG_SPIFLASH |
| 28 | #define CONFIG_SYS_RAMBOOT | |
| 29 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 30 | #define CONFIG_SYS_TEXT_BASE 0xf8f80000 | |
| 31 | #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc | |
| 32 | #endif | |
| 33 | ||
| feb7838f SS |
34 | /* High Level Configuration Options */ |
| 35 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
| 36 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
| 37 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ | |
| 38 | #define CONFIG_P2020 1 | |
| 39 | #define CONFIG_P2020DS 1 | |
| 40 | #define CONFIG_MP 1 /* support multiple processors */ | |
| feb7838f | 41 | |
| 2ae18241 WD |
42 | #ifndef CONFIG_SYS_TEXT_BASE |
| 43 | #define CONFIG_SYS_TEXT_BASE 0xeff80000 | |
| 44 | #endif | |
| 45 | ||
| 7a577fda KG |
46 | #ifndef CONFIG_RESET_VECTOR_ADDRESS |
| 47 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 48 | #endif | |
| 49 | ||
| 28a096e7 LY |
50 | #define CONFIG_SYS_SRIO |
| 51 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
| 52 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
| 53 | ||
| feb7838f SS |
54 | #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ |
| 55 | #define CONFIG_PCI 1 /* Enable PCI/PCIE */ | |
| 56 | #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ | |
| 57 | #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ | |
| 58 | #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ | |
| 59 | #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ | |
| 842033e6 | 60 | #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ |
| feb7838f SS |
61 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ |
| 62 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ | |
| 63 | ||
| 64 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ | |
| 29c35182 | 65 | #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ |
| feb7838f SS |
66 | |
| 67 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ | |
| 68 | #define CONFIG_ENV_OVERWRITE | |
| 69 | ||
| ebf9d526 KG |
70 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ |
| 71 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ | |
| feb7838f | 72 | #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ |
| feb7838f SS |
73 | |
| 74 | /* | |
| 75 | * These can be toggled for performance analysis, otherwise use default. | |
| 76 | */ | |
| 77 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
| 78 | #define CONFIG_BTB /* toggle branch predition */ | |
| 79 | ||
| 9c4d8767 JH |
80 | #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ |
| 81 | ||
| feb7838f SS |
82 | #define CONFIG_ENABLE_36BIT_PHYS 1 |
| 83 | ||
| 84 | #ifdef CONFIG_PHYS_64BIT | |
| 85 | #define CONFIG_ADDR_MAP 1 | |
| 86 | #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ | |
| 87 | #endif | |
| 88 | ||
| 84bc0030 YS |
89 | #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ |
| 90 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 91 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| feb7838f SS |
92 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
| 93 | ||
| 1ac63e40 JH |
94 | /* |
| 95 | * Config the L2 Cache | |
| 96 | */ | |
| 97 | #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 | |
| 98 | #ifdef CONFIG_PHYS_64BIT | |
| 99 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull | |
| 100 | #else | |
| 101 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
| 102 | #endif | |
| 103 | #define CONFIG_SYS_L2_SIZE (512 << 10) | |
| 104 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
| 105 | ||
| e46fedfe TT |
106 | #define CONFIG_SYS_CCSRBAR 0xffe00000 |
| 107 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
| feb7838f | 108 | |
| feb7838f | 109 | /* DDR Setup */ |
| feb7838f | 110 | #define CONFIG_VERY_BIG_RAM |
| d24f2d32 | 111 | #ifdef CONFIG_DDR2 |
| 394c46ca YS |
112 | #define CONFIG_FSL_DDR2 |
| 113 | #else | |
| feb7838f | 114 | #define CONFIG_FSL_DDR3 1 |
| 394c46ca | 115 | #endif |
| feb7838f | 116 | |
| 8e5e9b94 WD |
117 | /* ECC will be enabled based on perf_mode environment variable */ |
| 118 | /* #define CONFIG_DDR_ECC */ | |
| 119 | ||
| feb7838f SS |
120 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER |
| 121 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
| 122 | ||
| 123 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 124 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 125 | ||
| 126 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
| 127 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 128 | #define CONFIG_CHIP_SELECTS_PER_CTRL 2 | |
| 129 | ||
| 130 | /* I2C addresses of SPD EEPROMs */ | |
| 394c46ca | 131 | #define CONFIG_DDR_SPD |
| feb7838f | 132 | #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD EEPROM located on I2C bus 0 */ |
| c39f44dc | 133 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ |
| feb7838f SS |
134 | |
| 135 | /* These are used when DDR doesn't use SPD. */ | |
| feb7838f SS |
136 | #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1GB */ |
| 137 | ||
| 138 | /* Default settings for "stable" mode */ | |
| 139 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F | |
| 140 | #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 | |
| 141 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 | |
| 142 | #define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 | |
| 143 | #define CONFIG_SYS_DDR_TIMING_3 0x00020000 | |
| 144 | #define CONFIG_SYS_DDR_TIMING_0 0x00330804 | |
| 145 | #define CONFIG_SYS_DDR_TIMING_1 0x6f6b4846 | |
| 146 | #define CONFIG_SYS_DDR_TIMING_2 0x0fa890d4 | |
| 147 | #define CONFIG_SYS_DDR_MODE_1 0x00421422 | |
| 148 | #define CONFIG_SYS_DDR_MODE_2 0x00000000 | |
| 149 | #define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 | |
| 150 | #define CONFIG_SYS_DDR_INTERVAL 0x61800100 | |
| 151 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 152 | #define CONFIG_SYS_DDR_CLK_CTRL 0x02000000 | |
| 153 | #define CONFIG_SYS_DDR_TIMING_4 0x00220001 | |
| 154 | #define CONFIG_SYS_DDR_TIMING_5 0x03402400 | |
| 155 | #define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 | |
| 156 | #define CONFIG_SYS_DDR_WRLVL_CNTL 0x8655A608 | |
| 157 | #define CONFIG_SYS_DDR_CONTROL 0xE7000000 /* Type = DDR3: ECC enabled, No Interleaving */ | |
| 158 | #define CONFIG_SYS_DDR_CONTROL2 0x24400011 | |
| 159 | #define CONFIG_SYS_DDR_CDR1 0x00040000 | |
| 160 | #define CONFIG_SYS_DDR_CDR2 0x00000000 | |
| 161 | ||
| 162 | #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d | |
| 163 | #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 | |
| 164 | #define CONFIG_SYS_DDR_SBE 0x00010000 | |
| 165 | ||
| 166 | /* Settings that differ for "performance" mode */ | |
| 167 | #define CONFIG_SYS_DDR_CS0_BNDS_PERF 0x0000007F /* Interleaving Enabled */ | |
| 168 | #define CONFIG_SYS_DDR_CS1_BNDS_PERF 0x00000000 /* Interleaving Enabled */ | |
| 169 | #define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014202 | |
| 170 | #define CONFIG_SYS_DDR_TIMING_1_PERF 0x5d5b4543 | |
| 171 | #define CONFIG_SYS_DDR_TIMING_2_PERF 0x0fa890ce | |
| 172 | #define CONFIG_SYS_DDR_CONTROL_PERF 0xC7004000 /* Type = DDR3: ECC disabled, cs0-cs1 interleaving */ | |
| 173 | ||
| 174 | /* | |
| 175 | * The following set of values were tested for DDR2 | |
| 176 | * with a DDR3 to DDR2 interposer | |
| 177 | * | |
| 178 | #define CONFIG_SYS_DDR_TIMING_3 0x00000000 | |
| 179 | #define CONFIG_SYS_DDR_TIMING_0 0x00260802 | |
| 180 | #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 | |
| 181 | #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 | |
| 182 | #define CONFIG_SYS_DDR_MODE_1 0x00480432 | |
| 183 | #define CONFIG_SYS_DDR_MODE_2 0x00000000 | |
| 184 | #define CONFIG_SYS_DDR_INTERVAL 0x06180100 | |
| 185 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 186 | #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 | |
| 187 | #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 | |
| 188 | #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 | |
| 189 | #define CONFIG_SYS_DDR_CONTROL 0xC3008000 | |
| 190 | #define CONFIG_SYS_DDR_CONTROL2 0x04400010 | |
| 191 | * | |
| 192 | */ | |
| 193 | ||
| feb7838f SS |
194 | /* |
| 195 | * Memory map | |
| 196 | * | |
| 197 | * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable | |
| 198 | * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable | |
| 199 | * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable | |
| 200 | * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable | |
| 201 | * | |
| 202 | * Localbus cacheable (TBD) | |
| 203 | * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable | |
| 204 | * | |
| 205 | * Localbus non-cacheable | |
| 206 | * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable | |
| 207 | * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable | |
| 208 | * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable | |
| 209 | * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 | |
| 210 | * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 | |
| 211 | * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable | |
| 212 | */ | |
| 213 | ||
| 214 | /* | |
| 215 | * Local Bus Definitions | |
| 216 | */ | |
| 217 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ | |
| 218 | #ifdef CONFIG_PHYS_64BIT | |
| 219 | #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull | |
| 220 | #else | |
| 221 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 222 | #endif | |
| 223 | ||
| 7ee41107 TT |
224 | #define CONFIG_FLASH_BR_PRELIM \ |
| 225 | (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) | |
| feb7838f SS |
226 | #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 |
| 227 | ||
| 228 | #define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) | |
| 229 | #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 | |
| 230 | ||
| 231 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 232 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 233 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 234 | ||
| 235 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 236 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| feb7838f SS |
237 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ |
| 238 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 239 | ||
| 14d0a02a | 240 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
| feb7838f SS |
241 | |
| 242 | #define CONFIG_FLASH_CFI_DRIVER | |
| 243 | #define CONFIG_SYS_FLASH_CFI | |
| 244 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 245 | #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 | |
| 246 | ||
| 247 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 248 | ||
| 394c46ca | 249 | #define CONFIG_HWCONFIG /* enable hwconfig */ |
| 5a469608 TT |
250 | #define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ |
| 251 | ||
| 252 | #ifdef CONFIG_FSL_NGPIXIS | |
| feb7838f SS |
253 | #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ |
| 254 | #ifdef CONFIG_PHYS_64BIT | |
| 255 | #define PIXIS_BASE_PHYS 0xfffdf0000ull | |
| 256 | #else | |
| 257 | #define PIXIS_BASE_PHYS PIXIS_BASE | |
| 258 | #endif | |
| 259 | ||
| 260 | #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) | |
| 261 | #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ | |
| 262 | ||
| 5a469608 TT |
263 | #define PIXIS_LBMAP_SWITCH 7 |
| 264 | #define PIXIS_LBMAP_MASK 0xf0 | |
| 265 | #define PIXIS_LBMAP_SHIFT 4 | |
| 266 | #define PIXIS_LBMAP_ALTBANK 0x20 | |
| 267 | #endif | |
| feb7838f SS |
268 | |
| 269 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
| 270 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
| d51cc7a0 YS |
271 | #ifdef CONFIG_PHYS_64BIT |
| 272 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 273 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR | |
| 274 | /* The assembler doesn't like typecast */ | |
| 275 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 276 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 277 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 278 | #else | |
| 279 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ | |
| 280 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 | |
| 281 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 282 | #endif | |
| 553f0982 | 283 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ |
| feb7838f | 284 | |
| 25ddd1fb | 285 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| feb7838f SS |
286 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| 287 | ||
| 288 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ | |
| 289 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ | |
| 290 | ||
| 291 | #define CONFIG_SYS_NAND_BASE 0xffa00000 | |
| 292 | #ifdef CONFIG_PHYS_64BIT | |
| 293 | #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull | |
| 294 | #else | |
| 295 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 296 | #endif | |
| 297 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ | |
| 298 | CONFIG_SYS_NAND_BASE + 0x40000, \ | |
| 299 | CONFIG_SYS_NAND_BASE + 0x80000,\ | |
| 300 | CONFIG_SYS_NAND_BASE + 0xC0000} | |
| 301 | #define CONFIG_SYS_MAX_NAND_DEVICE 4 | |
| 302 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
| 303 | #define CONFIG_CMD_NAND 1 | |
| 304 | #define CONFIG_NAND_FSL_ELBC 1 | |
| 305 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 306 | ||
| 307 | /* NAND flash config */ | |
| a3055c58 | 308 | #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
| feb7838f SS |
309 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 310 | | BR_PS_8 /* Port Size = 8bit */ \ | |
| 311 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 312 | | BR_V) /* valid */ | |
| a3055c58 | 313 | #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ |
| feb7838f SS |
314 | | OR_FCM_PGS /* Large Page*/ \ |
| 315 | | OR_FCM_CSCT \ | |
| 316 | | OR_FCM_CST \ | |
| 317 | | OR_FCM_CHT \ | |
| 318 | | OR_FCM_SCY_1 \ | |
| 319 | | OR_FCM_TRLX \ | |
| 320 | | OR_FCM_EHTR) | |
| 321 | ||
| 322 | #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 323 | #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
| a3055c58 MM |
324 | #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ |
| 325 | #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
| feb7838f | 326 | |
| 7ee41107 | 327 | #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ |
| feb7838f SS |
328 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 329 | | BR_PS_8 /* Port Size = 8bit */ \ | |
| 330 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 331 | | BR_V) /* valid */ | |
| a3055c58 | 332 | #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
| 7ee41107 | 333 | #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ |
| feb7838f SS |
334 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 335 | | BR_PS_8 /* Port Size = 8bit */ \ | |
| 336 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 337 | | BR_V) /* valid */ | |
| a3055c58 | 338 | #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
| feb7838f | 339 | |
| 7ee41107 | 340 | #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ |
| feb7838f SS |
341 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 342 | | BR_PS_8 /* Port Size = 8bit */ \ | |
| 343 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 344 | | BR_V) /* valid */ | |
| a3055c58 | 345 | #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
| feb7838f SS |
346 | |
| 347 | /* Serial Port - controlled on board with jumper J8 | |
| 348 | * open - index 2 | |
| 349 | * shorted - index 1 | |
| 350 | */ | |
| 351 | #define CONFIG_CONS_INDEX 1 | |
| feb7838f SS |
352 | #define CONFIG_SYS_NS16550 |
| 353 | #define CONFIG_SYS_NS16550_SERIAL | |
| 354 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 355 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 356 | ||
| 357 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| fb365a8a | 358 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| feb7838f SS |
359 | |
| 360 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
| 361 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
| 362 | ||
| 363 | /* Use the HUSH parser */ | |
| 364 | #define CONFIG_SYS_HUSH_PARSER | |
| feb7838f SS |
365 | |
| 366 | /* | |
| 367 | * Pass open firmware flat tree | |
| 368 | */ | |
| 369 | #define CONFIG_OF_LIBFDT 1 | |
| 370 | #define CONFIG_OF_BOARD_SETUP 1 | |
| 371 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
| 372 | ||
| feb7838f SS |
373 | /* I2C */ |
| 374 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
| 375 | #define CONFIG_HARD_I2C /* I2C with hardware support */ | |
| feb7838f | 376 | #define CONFIG_I2C_MULTI_BUS |
| feb7838f SS |
377 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
| 378 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 379 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 380 | #define CONFIG_SYS_I2C_NOPROBES {{0,0x29}}/* Don't probe these addrs */ | |
| 381 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
| 382 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
| 383 | ||
| 384 | /* | |
| 385 | * I2C2 EEPROM | |
| 386 | */ | |
| 387 | #define CONFIG_ID_EEPROM | |
| 388 | #ifdef CONFIG_ID_EEPROM | |
| 389 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 390 | #endif | |
| 391 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 392 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 393 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 394 | ||
| 21dd9af3 JH |
395 | /* |
| 396 | * eSPI - Enhanced SPI | |
| 397 | */ | |
| 398 | #define CONFIG_FSL_ESPI | |
| 399 | ||
| 400 | #define CONFIG_SPI_FLASH | |
| 401 | #define CONFIG_SPI_FLASH_SPANSION | |
| 402 | ||
| 403 | #define CONFIG_CMD_SF | |
| 404 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 405 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 | |
| 406 | ||
| feb7838f SS |
407 | /* |
| 408 | * General PCI | |
| 409 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 410 | */ | |
| 411 | ||
| 412 | /* controller 3, Slot 1, tgtid 3, Base address b000 */ | |
| 4d5723da | 413 | #define CONFIG_SYS_PCIE3_NAME "Slot 1" |
| feb7838f SS |
414 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 |
| 415 | #ifdef CONFIG_PHYS_64BIT | |
| 156984a3 | 416 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 |
| feb7838f SS |
417 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull |
| 418 | #else | |
| 419 | #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 | |
| 420 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 | |
| 421 | #endif | |
| 422 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ | |
| 423 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 | |
| 424 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 425 | #ifdef CONFIG_PHYS_64BIT | |
| 426 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull | |
| 427 | #else | |
| 428 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 | |
| 429 | #endif | |
| 430 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 431 | ||
| 432 | /* controller 2, direct to uli, tgtid 2, Base address 9000 */ | |
| 4d5723da | 433 | #define CONFIG_SYS_PCIE2_NAME "ULI" |
| feb7838f SS |
434 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 |
| 435 | #ifdef CONFIG_PHYS_64BIT | |
| 156984a3 | 436 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 |
| feb7838f SS |
437 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull |
| 438 | #else | |
| 439 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 | |
| 440 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 | |
| 441 | #endif | |
| 442 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 443 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 | |
| 444 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 445 | #ifdef CONFIG_PHYS_64BIT | |
| 446 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull | |
| 447 | #else | |
| 448 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 | |
| 449 | #endif | |
| 450 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 451 | ||
| 452 | /* controller 1, Slot 2, tgtid 1, Base address a000 */ | |
| 4d5723da | 453 | #define CONFIG_SYS_PCIE1_NAME "Slot 2" |
| feb7838f SS |
454 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 |
| 455 | #ifdef CONFIG_PHYS_64BIT | |
| 156984a3 | 456 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 |
| feb7838f SS |
457 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull |
| 458 | #else | |
| 459 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 | |
| 460 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 | |
| 461 | #endif | |
| 462 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 463 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 | |
| 464 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 465 | #ifdef CONFIG_PHYS_64BIT | |
| 466 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull | |
| 467 | #else | |
| 468 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 | |
| 469 | #endif | |
| 470 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 471 | ||
| 472 | #if defined(CONFIG_PCI) | |
| 473 | ||
| 474 | /*PCIE video card used*/ | |
| 475 | #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT | |
| 476 | ||
| 477 | /* video */ | |
| d4ed6542 | 478 | #undef CONFIG_VIDEO |
| feb7838f SS |
479 | |
| 480 | #if defined(CONFIG_VIDEO) | |
| 481 | #define CONFIG_BIOSEMU | |
| 482 | #define CONFIG_CFB_CONSOLE | |
| 483 | #define CONFIG_VIDEO_SW_CURSOR | |
| 484 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
| 485 | #define CONFIG_ATI_RADEON_FB | |
| 486 | #define CONFIG_VIDEO_LOGO | |
| 487 | /*#define CONFIG_CONSOLE_CURSOR*/ | |
| 488 | #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET | |
| 489 | #endif | |
| 490 | ||
| 28a096e7 LY |
491 | /* SRIO1 uses the same window as PCIE2 mem window */ |
| 492 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
| 493 | #ifdef CONFIG_PHYS_64BIT | |
| 494 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
| 495 | #else | |
| 496 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 | |
| 497 | #endif | |
| 498 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ | |
| 499 | ||
| 500 | /* SRIO2 uses the same window as PCIE1 mem window */ | |
| 501 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xc0000000 | |
| 502 | #ifdef CONFIG_PHYS_64BIT | |
| 503 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc40000000ull | |
| 504 | #else | |
| 505 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc0000000 | |
| 506 | #endif | |
| 507 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x20000000 /* 512M */ | |
| 508 | ||
| feb7838f | 509 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| feb7838f SS |
510 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| 511 | #define CONFIG_DOS_PARTITION | |
| 512 | #define CONFIG_SCSI_AHCI | |
| 513 | ||
| 514 | #ifdef CONFIG_SCSI_AHCI | |
| 515 | #define CONFIG_SATA_ULI5288 | |
| 516 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 | |
| 517 | #define CONFIG_SYS_SCSI_MAX_LUN 1 | |
| 518 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) | |
| 519 | #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE | |
| 520 | #endif /* SCSI */ | |
| 521 | ||
| 522 | #endif /* CONFIG_PCI */ | |
| 523 | ||
| 524 | ||
| 525 | #if defined(CONFIG_TSEC_ENET) | |
| 526 | ||
| feb7838f SS |
527 | #define CONFIG_MII 1 /* MII PHY management */ |
| 528 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
| 529 | #define CONFIG_TSEC1 1 | |
| 530 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
| 531 | #define CONFIG_TSEC2 1 | |
| 532 | #define CONFIG_TSEC2_NAME "eTSEC2" | |
| 533 | #define CONFIG_TSEC3 1 | |
| 534 | #define CONFIG_TSEC3_NAME "eTSEC3" | |
| 535 | ||
| feb7838f SS |
536 | #define CONFIG_FSL_SGMII_RISER 1 |
| 537 | #define SGMII_RISER_PHY_OFFSET 0x1b | |
| 538 | ||
| 539 | #ifdef CONFIG_FSL_SGMII_RISER | |
| 540 | #define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ | |
| 541 | #endif | |
| 542 | ||
| 543 | #define TSEC1_PHY_ADDR 0 | |
| 544 | #define TSEC2_PHY_ADDR 1 | |
| 545 | #define TSEC3_PHY_ADDR 2 | |
| 546 | ||
| 547 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 548 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 549 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 550 | ||
| 551 | #define TSEC1_PHYIDX 0 | |
| 552 | #define TSEC2_PHYIDX 0 | |
| 553 | #define TSEC3_PHYIDX 0 | |
| 554 | ||
| 555 | #define CONFIG_ETHPRIME "eTSEC1" | |
| 556 | ||
| 557 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| 558 | #endif /* CONFIG_TSEC_ENET */ | |
| 559 | ||
| 560 | /* | |
| 561 | * Environment | |
| 562 | */ | |
| 1ac63e40 JH |
563 | #if defined(CONFIG_SDCARD) |
| 564 | #define CONFIG_ENV_IS_IN_MMC | |
| 4394d0c2 | 565 | #define CONFIG_FSL_FIXED_MMC_LOCATION |
| 1ac63e40 JH |
566 | #define CONFIG_ENV_SIZE 0x2000 |
| 567 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 21dd9af3 JH |
568 | #elif defined(CONFIG_SPIFLASH) |
| 569 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 570 | #define CONFIG_ENV_SPI_BUS 0 | |
| 571 | #define CONFIG_ENV_SPI_CS 0 | |
| 572 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 573 | #define CONFIG_ENV_SPI_MODE 0 | |
| 574 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 575 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 576 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 1ac63e40 | 577 | #else |
| feb7838f SS |
578 | #define CONFIG_ENV_IS_IN_FLASH 1 |
| 579 | #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 | |
| 580 | #define CONFIG_ENV_ADDR 0xfff80000 | |
| 581 | #else | |
| 582 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 583 | #endif | |
| 584 | #define CONFIG_ENV_SIZE 0x2000 | |
| 585 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 1ac63e40 | 586 | #endif |
| feb7838f SS |
587 | |
| 588 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| 589 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
| 590 | ||
| 591 | /* | |
| 592 | * Command line configuration. | |
| 593 | */ | |
| 594 | #include <config_cmd_default.h> | |
| 595 | ||
| 596 | #define CONFIG_CMD_IRQ | |
| 597 | #define CONFIG_CMD_PING | |
| 598 | #define CONFIG_CMD_I2C | |
| 599 | #define CONFIG_CMD_MII | |
| 600 | #define CONFIG_CMD_ELF | |
| 601 | #define CONFIG_CMD_IRQ | |
| 602 | #define CONFIG_CMD_SETEXPR | |
| 199e262e | 603 | #define CONFIG_CMD_REGINFO |
| feb7838f SS |
604 | |
| 605 | #if defined(CONFIG_PCI) | |
| 606 | #define CONFIG_CMD_PCI | |
| feb7838f SS |
607 | #define CONFIG_CMD_NET |
| 608 | #define CONFIG_CMD_SCSI | |
| 609 | #define CONFIG_CMD_EXT2 | |
| 610 | #endif | |
| 611 | ||
| 0ead6f2e RZ |
612 | /* |
| 613 | * USB | |
| 614 | */ | |
| 3d7506fa | 615 | #define CONFIG_HAS_FSL_DR_USB |
| 616 | #ifdef CONFIG_HAS_FSL_DR_USB | |
| 9c4d8767 JH |
617 | #define CONFIG_USB_EHCI |
| 618 | ||
| 619 | #ifdef CONFIG_USB_EHCI | |
| 0ead6f2e RZ |
620 | #define CONFIG_CMD_USB |
| 621 | #define CONFIG_USB_STORAGE | |
| 0ead6f2e RZ |
622 | #define CONFIG_USB_EHCI_FSL |
| 623 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 9c4d8767 | 624 | #endif |
| 3d7506fa | 625 | #endif |
| 0ead6f2e | 626 | |
| 9c4d8767 JH |
627 | /* |
| 628 | * SDHC/MMC | |
| 629 | */ | |
| 630 | #define CONFIG_MMC | |
| 631 | ||
| 632 | #ifdef CONFIG_MMC | |
| 633 | #define CONFIG_FSL_ESDHC | |
| 634 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 635 | #define CONFIG_CMD_MMC | |
| 636 | #define CONFIG_GENERIC_MMC | |
| 637 | #endif | |
| 638 | ||
| 639 | #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) | |
| 640 | #define CONFIG_CMD_EXT2 | |
| 641 | #define CONFIG_CMD_FAT | |
| 642 | #define CONFIG_DOS_PARTITION | |
| 643 | #endif | |
| 644 | ||
| feb7838f SS |
645 | /* |
| 646 | * Miscellaneous configurable options | |
| 647 | */ | |
| 648 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 5be58f5f KP |
649 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| 650 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| feb7838f SS |
651 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 652 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 653 | #if defined(CONFIG_CMD_KGDB) | |
| 654 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 655 | #else | |
| 656 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 657 | #endif | |
| 658 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ | |
| 659 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 660 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| 661 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
| 662 | ||
| 663 | /* | |
| 664 | * For booting Linux, the board info and command line data | |
| a832ac41 | 665 | * have to be in the first 64 MB of memory, since this is |
| feb7838f SS |
666 | * the maximum mapped by the Linux kernel during initialization. |
| 667 | */ | |
| a832ac41 KG |
668 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ |
| 669 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| feb7838f | 670 | |
| feb7838f SS |
671 | #if defined(CONFIG_CMD_KGDB) |
| 672 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 673 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 674 | #endif | |
| 675 | ||
| 676 | /* | |
| 677 | * Environment Configuration | |
| 678 | */ | |
| 679 | ||
| 680 | /* The mac addresses for all ethernet interface */ | |
| 681 | #if defined(CONFIG_TSEC_ENET) | |
| 682 | #define CONFIG_HAS_ETH0 | |
| feb7838f | 683 | #define CONFIG_HAS_ETH1 |
| feb7838f | 684 | #define CONFIG_HAS_ETH2 |
| feb7838f SS |
685 | #endif |
| 686 | ||
| 687 | #define CONFIG_IPADDR 192.168.1.254 | |
| 688 | ||
| 689 | #define CONFIG_HOSTNAME unknown | |
| 8b3637c6 | 690 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
| b3f44c21 | 691 | #define CONFIG_BOOTFILE "uImage" |
| feb7838f SS |
692 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ |
| 693 | ||
| 694 | #define CONFIG_SERVERIP 192.168.1.1 | |
| 695 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
| 696 | #define CONFIG_NETMASK 255.255.255.0 | |
| 697 | ||
| 698 | /* default location for tftp and bootm */ | |
| 699 | #define CONFIG_LOADADDR 1000000 | |
| 700 | ||
| 701 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| feb7838f SS |
702 | |
| 703 | #define CONFIG_BAUDRATE 115200 | |
| 704 | ||
| 705 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 5368c55d | 706 | "perf_mode=performance\0" \ |
| 68d4230c RM |
707 | "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1;" \ |
| 708 | "usb1:dr_mode=host,phy_type=ulpi\0" \ | |
| 5368c55d MV |
709 | "netdev=eth0\0" \ |
| 710 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 711 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
| 712 | "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
| 713 | "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
| 714 | "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ | |
| 715 | "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
| 716 | "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ | |
| 717 | "satabootcmd=setenv bootargs root=/dev/$bdev rw " \ | |
| ccc4a8d8 LY |
718 | "console=$consoledev,$baudrate $othbootargs;" \ |
| 719 | "tftp $loadaddr $bootfile;" \ | |
| 720 | "tftp $fdtaddr $fdtfile;" \ | |
| 721 | "bootm $loadaddr - $fdtaddr" \ | |
| 5368c55d MV |
722 | "consoledev=ttyS0\0" \ |
| 723 | "ramdiskaddr=2000000\0" \ | |
| 724 | "ramdiskfile=p2020ds/ramdisk.uboot\0" \ | |
| 725 | "fdtaddr=c00000\0" \ | |
| 726 | "othbootargs=cache-sram-size=0x10000\0" \ | |
| 727 | "fdtfile=p2020ds/p2020ds.dtb\0" \ | |
| 728 | "bdev=sda3\0" \ | |
| 729 | "partition=scsi 0:0\0" | |
| feb7838f SS |
730 | |
| 731 | #define CONFIG_HDBOOT \ | |
| 732 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 733 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| ccc4a8d8 LY |
734 | "ext2load $partition $loadaddr $bootfile;" \ |
| 735 | "ext2load $partition $fdtaddr $fdtfile;" \ | |
| feb7838f SS |
736 | "bootm $loadaddr - $fdtaddr" |
| 737 | ||
| 738 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 739 | "setenv bootargs root=/dev/nfs rw " \ | |
| 740 | "nfsroot=$serverip:$rootpath " \ | |
| 741 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 742 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 743 | "tftp $loadaddr $bootfile;" \ | |
| 744 | "tftp $fdtaddr $fdtfile;" \ | |
| 745 | "bootm $loadaddr - $fdtaddr" | |
| 746 | ||
| 747 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 748 | "setenv bootargs root=/dev/ram rw " \ | |
| 749 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 750 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 751 | "tftp $loadaddr $bootfile;" \ | |
| 752 | "tftp $fdtaddr $fdtfile;" \ | |
| 753 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 754 | ||
| 755 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT | |
| 756 | ||
| 757 | #endif /* __CONFIG_H */ |