[people/ms/u-boot.git] / include / configs / PIP405.h

/*
 * (C) Copyright 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/***********************************************************
 * High Level Configuration Options
 * (easy to change)
 ***********************************************************/
#define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_PIP405		1	/* ...on a PIP405 board		*/
/***********************************************************
 * Clock
 ***********************************************************/
#define CONFIG_SYS_CLK_FREQ	33000000 /* external frequency to pll	*/

/***********************************************************
 * Command definitions
 ***********************************************************/
#define CONFIG_COMMANDS		\
		       (CONFIG_CMD_DFL	| \
			CFG_CMD_IDE	| \
			CFG_CMD_DHCP	| \
			CFG_CMD_PCI	| \
			CFG_CMD_CACHE	| \
			CFG_CMD_IRQ	| \
			CFG_CMD_ECHO	| \
			CFG_CMD_EEPROM	| \
			CFG_CMD_I2C	| \
			CFG_CMD_REGINFO | \
			CFG_CMD_FDC	| \
			CFG_CMD_SCSI	| \
			CFG_CMD_FAT 	| \
			CFG_CMD_DATE	| \
			CFG_CMD_ELF	| \
			CFG_CMD_USB	| \
			CFG_CMD_MII	| \
			CFG_CMD_SDRAM	| \
			CFG_CMD_DOC	| \
			CFG_CMD_PING	| \
			CFG_CMD_SAVES   | \
			CFG_CMD_BSP	)
/* this must be included AFTER the definition of CONFIG_COMMANDS  (if any) */
#include <cmd_confdefs.h>

#define	 CFG_HUSH_PARSER
#define	 CFG_PROMPT_HUSH_PS2 "> "
/**************************************************************
 * I2C Stuff:
 * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address
 * 0x53.
 * Caution: on the same bus is the SPD (Serial Presens Detect
 * EEPROM of the SDRAM
 * The Atmel EEPROM uses 16Bit addressing.
 ***************************************************************/
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CFG_I2C_SPEED		50000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0x7F

#define CFG_I2C_EEPROM_ADDR	0x53
#define CFG_I2C_EEPROM_ADDR_LEN	2
#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
#define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
#define CFG_ENV_SIZE            0x800   /* 2 kBytes may be used for env vars */

#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
#define CFG_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel 24C128/256 has	*/
					/* 64 byte page write mode using*/
					/* last	6 bits of the address	*/
#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* enable Page write */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */


/***************************************************************
 * Definitions for Serial Presence Detect EEPROM address
 * (to get SDRAM settings)
 ***************************************************************/
#define SPD_EEPROM_ADDRESS      0x50

#define CONFIG_BOARD_PRE_INIT
/**************************************************************
 * Environment definitions
 **************************************************************/
#define CONFIG_BAUDRATE		9600	/* STD Baudrate */


#define CONFIG_BOOTDELAY	5
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
#define CONFIG_BOOT_RETRY_TIME	-10	/* feature is avaiable but not enabled */
#define CONFIG_ZERO_BOOTDELAY_CHECK  	/* check console even if bootdelay = 0 */


#define CONFIG_BOOTCOMMAND	"diskboot 400000 0:1; bootm" /* autoboot command		*/
#define CONFIG_BOOTARGS		"console=ttyS0,9600 root=/dev/hda5" /* boot arguments */

#define CONFIG_IPADDR		10.0.0.100
#define CONFIG_SERVERIP		10.0.0.1
#define CONFIG_PREBOOT
/***************************************************************
 * defines if the console is stored in the environment
 ***************************************************************/
#define CFG_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
/***************************************************************
 * defines if an overwrite_console function exists
 *************************************************************/
#define CFG_CONSOLE_OVERWRITE_ROUTINE
#define CFG_CONSOLE_INFO_QUIET
/***************************************************************
 * defines if the overwrite_console should be stored in the
 * environment
 **************************************************************/
#undef CFG_CONSOLE_ENV_OVERWRITE

/**************************************************************
 * loads config
 *************************************************************/
#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_MISC_INIT_R
/***********************************************************
 * Miscellaneous configurable options
 **********************************************************/
#define CFG_LONGHELP			/* undef to save memory		*/
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/

#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
#define CFG_BASE_BAUD       691200

/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CFG_LOAD_ADDR		0x400000	/* default load address */
#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */

#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
#define PCI_HOST_FORCE  1               /* configure as pci host        */
#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */

#define CONFIG_PCI			/* include pci support		*/
#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* configure as pci-host	*/
#define CONFIG_PCI_PNP			/* pci plug-and-play		*/
					/* resource configuration	*/
#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
#define CFG_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0xFFF80000
#define CFG_MONITOR_BASE	CFG_FLASH_BASE
#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserve 1024 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
#define CFG_CACHELINE_SIZE	32	/* ...			*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
#endif

/*
 * Init Memory Controller:
 */
#define FLASH_MAX_SIZE		0x00800000		/* 8MByte max */
#define FLASH_BASE_PRELIM	0xFF800000  /* open the flash CS */
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
#define FLASH_SIZE_PRELIM	 3  /* maximal flash FLASH size bank #0	*/

#define CONFIG_BOARD_PRE_INIT

/* Configuration Port location */
#define CONFIG_PORT_ADDR	0xF4000000
#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000


/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in On Chip SRAM)
 */
#define CFG_TEMP_STACK_OCM	1
#define CFG_OCM_DATA_ADDR	0xF0000000
#define CFG_OCM_DATA_SIZE	0x1000
#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR 	/* inside of On Chip SRAM    */
#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/


/***********************************************************************
 * External peripheral base address
 ***********************************************************************/
#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000

/***********************************************************************
 * Last Stage Init
 ***********************************************************************/
#define CONFIG_LAST_STAGE_INIT
/************************************************************
 * Ethernet Stuff
 ***********************************************************/
#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		1	/* PHY address			*/
#define CONFIG_CS8952_PHY	1	/* its a CS8952 PHY		*/
/************************************************************
 * RTC
 ***********************************************************/
#define CONFIG_RTC_MC146818
#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/************************************************************
 * IDE/ATA stuff
 ************************************************************/
#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */

#define CFG_ATA_BASE_ADDR	CFG_ISA_IO_BASE_ADDRESS /* base address */
#define CFG_ATA_IDE0_OFFSET	0x01F0	/* ide0 offste */
#define CFG_ATA_IDE1_OFFSET	0x0170	/* ide1 offset */
#define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
#define CFG_ATA_REG_OFFSET	0	/* reg offset */
#define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */

#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
#define CONFIG_IDE_RESET		/* reset for ide supported...	*/
#define CONFIG_IDE_RESET_ROUTINE	/* with a special reset function */
#define CONFIG_SUPPORT_VFAT

/************************************************************
 * ATAPI support (experimental)
 ************************************************************/
#define CONFIG_ATAPI			/* enable ATAPI Support */

/************************************************************
 * SCSI support (experimental) only SYM53C8xx supported
 ************************************************************/
#define CONFIG_SCSI_SYM53C8XX
#define CFG_SCSI_MAX_LUN	8	/* number of supported LUNs */
#define CFG_SCSI_MAX_SCSI_ID	7	/* maximum SCSI ID (0..6) */
#define CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
#define CFG_SCSI_SPIN_UP_TIME	2

/************************************************************
 * Disk-On-Chip configuration
 ************************************************************/
#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
#define CFG_DOC_SHORT_TIMEOUT
#define CFG_DOC_SUPPORT_2000
#define CFG_DOC_SUPPORT_MILLENNIUM

/************************************************************
 * DISK Partition support
 ************************************************************/
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */

/************************************************************
 * Keyboard support
 ************************************************************/
#define CONFIG_ISA_KEYBOARD

/************************************************************
 * Video support
 ************************************************************/
#define CONFIG_VIDEO			/*To enable video controller support */
#define CONFIG_VIDEO_CT69000
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VIDEO_ONBOARD		/* Video controller is on-board */

/************************************************************
 * USB support
 ************************************************************/
#define CONFIG_USB_UHCI
#define CONFIG_USB_KEYBOARD
#define CONFIG_USB_STORAGE

/* Enable needed helper functions */
#define CFG_DEVICE_DEREGISTER		/* needs device_deregister */

/************************************************************
 * Debug support
 ************************************************************/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/************************************************************
 * support BZIP2 compression
 ************************************************************/
#define CONFIG_BZIP2		1

/************************************************************
 * Ident
 ************************************************************/
#define VERSION_TAG "released"
#define CONFIG_ISO_STRING "MEV-10066-001"
#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG


#endif	/* __CONFIG_H */
Commit	Line	Data
c609719b WD	1	/*
	2	* (C) Copyright 2001
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/***********************************************************
	32	* High Level Configuration Options
	33	* (easy to change)
	34	***********************************************************/
	35	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
	36	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
	37	#define CONFIG_PIP405 1 /* ...on a PIP405 board */
	38	/***********************************************************
	39	* Clock
	40	***********************************************************/
	41	#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
	42
	43	/***********************************************************
	44	* Command definitions
	45	***********************************************************/
	46	#define CONFIG_COMMANDS \
	47	(CONFIG_CMD_DFL \| \
	48	CFG_CMD_IDE \| \
	49	CFG_CMD_DHCP \| \
	50	CFG_CMD_PCI \| \
	51	CFG_CMD_CACHE \| \
	52	CFG_CMD_IRQ \| \
7205e407	53	CFG_CMD_ECHO \| \
c609719b WD	54	CFG_CMD_EEPROM \| \
	55	CFG_CMD_I2C \| \
	56	CFG_CMD_REGINFO \| \
	57	CFG_CMD_FDC \| \
	58	CFG_CMD_SCSI \| \
7205e407	59	CFG_CMD_FAT \| \
c609719b WD	60	CFG_CMD_DATE \| \
	61	CFG_CMD_ELF \| \
	62	CFG_CMD_USB \| \
	63	CFG_CMD_MII \| \
	64	CFG_CMD_SDRAM \| \
	65	CFG_CMD_DOC \| \
27b207fd	66	CFG_CMD_PING \| \
c609719b WD	67	CFG_CMD_SAVES \| \
	68	CFG_CMD_BSP )
	69	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	70	#include <cmd_confdefs.h>
	71
	72	#define CFG_HUSH_PARSER
	73	#define CFG_PROMPT_HUSH_PS2 "> "
	74	/**************************************************************
	75	* I2C Stuff:
	76	* the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address
	77	* 0x53.
	78	* Caution: on the same bus is the SPD (Serial Presens Detect
	79	* EEPROM of the SDRAM
	80	* The Atmel EEPROM uses 16Bit addressing.
	81	***************************************************************/
	82	#define CONFIG_HARD_I2C /* I2c with hardware support */
	83	#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */
	84	#define CFG_I2C_SLAVE 0x7F
	85
	86	#define CFG_I2C_EEPROM_ADDR 0x53
	87	#define CFG_I2C_EEPROM_ADDR_LEN 2
	88	#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
	89	#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
	90	#define CFG_ENV_SIZE 0x800 /* 2 kBytes may be used for env vars */
	91
	92	#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
	93	#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */
	94	/* 64 byte page write mode using*/
	95	/* last 6 bits of the address */
	96	#define CFG_EEPROM_PAGE_WRITE_ENABLE /* enable Page write */
	97	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
	98
	99
	100	/***************************************************************
	101	* Definitions for Serial Presence Detect EEPROM address
	102	* (to get SDRAM settings)
	103	***************************************************************/
	104	#define SPD_EEPROM_ADDRESS 0x50
	105
	106	#define CONFIG_BOARD_PRE_INIT
	107	/**************************************************************
	108	* Environment definitions
	109	**************************************************************/
	110	#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
	111
	112
	113	#define CONFIG_BOOTDELAY 5
	114	/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
	115	#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */
	116	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
	117
	118
3e38691e	119	#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
c609719b WD	120	#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
	121
	122	#define CONFIG_IPADDR 10.0.0.100
	123	#define CONFIG_SERVERIP 10.0.0.1
	124	#define CONFIG_PREBOOT
	125	/***************************************************************
	126	* defines if the console is stored in the environment
	127	***************************************************************/
	128	#define CFG_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
	129	/***************************************************************
	130	* defines if an overwrite_console function exists
	131	*************************************************************/
	132	#define CFG_CONSOLE_OVERWRITE_ROUTINE
	133	#define CFG_CONSOLE_INFO_QUIET
	134	/***************************************************************
	135	* defines if the overwrite_console should be stored in the
	136	* environment
	137	**************************************************************/
	138	#undef CFG_CONSOLE_ENV_OVERWRITE
	139
	140	/**************************************************************
	141	* loads config
	142	*************************************************************/
	143	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	144	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	145
7205e407	146	#define CONFIG_MISC_INIT_R
c609719b WD	147	/***********************************************************
	148	* Miscellaneous configurable options
	149	**********************************************************/
	150	#define CFG_LONGHELP /* undef to save memory */
	151	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	152	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	153	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	154	#else
	155	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	156	#endif
	157	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	158	#define CFG_MAXARGS 16 /* max number of command args */
	159	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	160
	161	#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
	162	#define CFG_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */
	163
	164	#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
	165	#define CFG_BASE_BAUD 691200
	166
	167	/* The following table includes the supported baudrates */
	168	#define CFG_BAUDRATE_TABLE \
	169	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
	170	57600, 115200, 230400, 460800, 921600 }
	171
3e38691e	172	#define CFG_LOAD_ADDR 0x400000 /* default load address */
c609719b WD	173	#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
	174
	175	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	176
	177	/*-----------------------------------------------------------------------
	178	* PCI stuff
	179	*-----------------------------------------------------------------------
	180	*/
	181	#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
	182	#define PCI_HOST_FORCE 1 /* configure as pci host */
	183	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	184
	185	#define CONFIG_PCI /* include pci support */
	186	#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */
	187	#define CONFIG_PCI_PNP /* pci plug-and-play */
	188	/* resource configuration */
	189	#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
	190	#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
	191	#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
	192	#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
	193	#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	194	#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
	195	#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
	196	#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
	197
	198	/*-----------------------------------------------------------------------
	199	* Start addresses for the final memory configuration
	200	* (Set up by the startup code)
	201	* Please note that CFG_SDRAM_BASE _must_ start at 0
	202	*/
	203	#define CFG_SDRAM_BASE 0x00000000
	204	#define CFG_FLASH_BASE 0xFFF80000
	205	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	206	#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
a2663ea4	207	#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */
c609719b WD	208
	209	/*
	210	* For booting Linux, the board info and command line data
	211	* have to be in the first 8 MB of memory, since this is
	212	* the maximum mapped by the Linux kernel during initialization.
	213	*/
	214	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	215	/*-----------------------------------------------------------------------
	216	* FLASH organization
	217	*/
	218	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	219	#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
	220
	221	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	222	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	223
	224	/*-----------------------------------------------------------------------
	225	* Cache Configuration
	226	*/
	227	#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
	228	#define CFG_CACHELINE_SIZE 32 /* ... */
	229	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	230	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	231	#endif
	232
	233	/*
	234	* Init Memory Controller:
	235	*/
7205e407 WD	236	#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */
	237	#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */
	238	/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
	239	#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */
c609719b	240
7205e407	241	#define CONFIG_BOARD_PRE_INIT
c609719b WD	242
	243	/* Configuration Port location */
	244	#define CONFIG_PORT_ADDR 0xF4000000
	245	#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
	246
	247
c609719b WD	248	/*-----------------------------------------------------------------------
	249	* Definitions for initial stack pointer and data area (in On Chip SRAM)
	250	*/
	251	#define CFG_TEMP_STACK_OCM 1
	252	#define CFG_OCM_DATA_ADDR 0xF0000000
	253	#define CFG_OCM_DATA_SIZE 0x1000
	254	#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
	255	#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
	256	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	257	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	258	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	259
	260	/*
	261	* Internal Definitions
	262	*
	263	* Boot Flags
	264	*/
	265	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	266	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	267
	268
	269	/***********************************************************************
	270	* External peripheral base address
	271	***********************************************************************/
	272	#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
	273
	274	/***********************************************************************
	275	* Last Stage Init
	276	***********************************************************************/
	277	#define CONFIG_LAST_STAGE_INIT
	278	/************************************************************
	279	* Ethernet Stuff
	280	***********************************************************/
	281	#define CONFIG_MII 1 /* MII PHY management */
	282	#define CONFIG_PHY_ADDR 1 /* PHY address */
	283	#define CONFIG_CS8952_PHY 1 /* its a CS8952 PHY */
	284	/************************************************************
	285	* RTC
	286	***********************************************************/
	287	#define CONFIG_RTC_MC146818
	288	#undef CONFIG_WATCHDOG /* watchdog disabled */
	289
	290	/************************************************************
	291	* IDE/ATA stuff
	292	************************************************************/
	293	#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */
	294	#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS2) / max. 2 drives per IDE bus */
	295
	296	#define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */
	297	#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
	298	#define CFG_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
	299	#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
	300	#define CFG_ATA_REG_OFFSET 0 /* reg offset */
	301	#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
	302
	303	#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
	304	#undef CONFIG_IDE_LED /* no led for ide supported */
	305	#define CONFIG_IDE_RESET /* reset for ide supported... */
	306	#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
7205e407	307	#define CONFIG_SUPPORT_VFAT
c609719b WD	308
	309	/************************************************************
	310	* ATAPI support (experimental)
	311	************************************************************/
	312	#define CONFIG_ATAPI /* enable ATAPI Support */
	313
	314	/************************************************************
	315	* SCSI support (experimental) only SYM53C8xx supported
	316	************************************************************/
	317	#define CONFIG_SCSI_SYM53C8XX
	318	#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */
	319	#define CFG_SCSI_MAX_SCSI_ID 7 /* maximum SCSI ID (0..6) */
	320	#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
	321	#define CFG_SCSI_SPIN_UP_TIME 2
	322
	323	/************************************************************
	324	* Disk-On-Chip configuration
	325	************************************************************/
	326	#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
	327	#define CFG_DOC_SHORT_TIMEOUT
	328	#define CFG_DOC_SUPPORT_2000
	329	#define CFG_DOC_SUPPORT_MILLENNIUM
	330
	331	/************************************************************
	332	* DISK Partition support
	333	************************************************************/
	334	#define CONFIG_DOS_PARTITION
	335	#define CONFIG_MAC_PARTITION
	336	#define CONFIG_ISO_PARTITION /* Experimental */
	337
	338	/************************************************************
	339	* Keyboard support
	340	************************************************************/
	341	#define CONFIG_ISA_KEYBOARD
	342
	343	/************************************************************
	344	* Video support
	345	************************************************************/
	346	#define CONFIG_VIDEO /To enable video controller support /
	347	#define CONFIG_VIDEO_CT69000
	348	#define CONFIG_CFB_CONSOLE
	349	#define CONFIG_VIDEO_LOGO
	350	#define CONFIG_CONSOLE_EXTRA_INFO
	351	#define CONFIG_VGA_AS_SINGLE_DEVICE
	352	#define CONFIG_VIDEO_SW_CURSOR
	353	#define CONFIG_VIDEO_ONBOARD /* Video controller is on-board */
	354
	355	/************************************************************
	356	* USB support
	357	************************************************************/
	358	#define CONFIG_USB_UHCI
	359	#define CONFIG_USB_KEYBOARD
	360	#define CONFIG_USB_STORAGE
	361
	362	/* Enable needed helper functions */
	363	#define CFG_DEVICE_DEREGISTER /* needs device_deregister */
	364
	365	/************************************************************
	366	* Debug support
	367	************************************************************/
	368	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	369	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	370	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	371	#endif
372
a2663ea4 WD	373	/************************************************************
	374	* support BZIP2 compression
	375	************************************************************/
	376	#define CONFIG_BZIP2 1
	377
c609719b WD	378	/************************************************************
	379	* Ident
	380	************************************************************/
	381	#define VERSION_TAG "released"
f3e0de60 WD	382	#define CONFIG_ISO_STRING "MEV-10066-001"
f3e0de60 WD	383	#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
c609719b WD	384
	385
	386	#endif /* __CONFIG_H */