[people/ms/u-boot.git] / include / configs / SM850.h

/*
 * (C) Copyright 2000-2008
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#undef TQM8xxL_80MHz	/*	1	/ * define for 80 MHz CPU only	*/

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
#define CONFIG_SM850		1	/*...on a MPC850 Service Module	*/

#undef	CONFIG_8xx_CONS_SMC1	/* SMC1 not usable because Ethernet on SCC3 */
#define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
#undef	CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		115200
#if 0
#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#endif

#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */

#define CONFIG_BOARD_TYPES	1	/* support board types		*/

#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND							\
	"bootp; "								\
	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
	"bootm"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#undef	CONFIG_STATUS_LED		/* Status LED not enabled	*/

#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


#define CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DATE


/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP			/* undef to save memory		*/
#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG)
#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/

#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CFG_IMMR		0xFFF00000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define	CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0x40000000
#if defined(DEBUG)
#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#else
#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#endif
#define CFG_MONITOR_BASE	CFG_FLASH_BASE
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
/* use CFI flash driver */
#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE	1
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */

#define	CONFIG_ENV_IS_IN_FLASH	1
#define	CONFIG_ENV_OFFSET	0x8000	/*   Offset   of Environment Sector	*/
#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */

/*-----------------------------------------------------------------------
 * Hardware Information Block
 */
#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#ifndef CONFIG_CAN_DRIVER
#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
#else	/* we must activate GPL5 in the SIUMCR for CAN */
#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
#endif	/* CONFIG_CAN_DRIVER */

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CFG_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 *
 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 */
#ifdef TQM8xxL_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
#define CFG_PLPRCR							\
		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
#else
#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#endif	/* TQM8xxL_80MHz */

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
#ifdef TQM8xxL_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
#define CFG_SCCR	(/* SCCR_TBS  | */ \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)
#else			/* up to 50 MHz we use a 1:1 clock */
#define CFG_SCCR	(SCCR_TBS     | \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)
#endif	/* TQM8xxL_80MHz */

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 *
 */
#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CFG_DER	0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */

/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
				 OR_SCY_5_CLK | OR_EHTR)

#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )

#define CFG_OR1_REMAP	CFG_OR0_REMAP
#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )

/*
 * BR2/3 and OR2/3 (SDRAM)
 *
 */
#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
#define CFG_OR_TIMING_SDRAM	0x00000A00

#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

#ifndef	CONFIG_CAN_DRIVER
#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
					BR_PS_8 | BR_MS_UPMB | BR_V )
#endif	/* CONFIG_CAN_DRIVER */

/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/

/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

/* 8 column SDRAM */
#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
/* 9 column SDRAM */
#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
75dc29eb	1	/*
7c803be2	2	* (C) Copyright 2000-2008
75dc29eb WD	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	#undef TQM8xxL_80MHz /* 1 / * define for 80 MHz CPU only */
	32
	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
	37
	38	#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
	39	#define CONFIG_SM850 1 /...on a MPC850 Service Module /
	40
	41	#undef CONFIG_8xx_CONS_SMC1 /* SMC1 not usable because Ethernet on SCC3 */
	42	#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
	43	#undef CONFIG_8xx_CONS_NONE
	44	#define CONFIG_BAUDRATE 115200
	45	#if 0
	46	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	47	#else
	48	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	49	#endif
	50
	51	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	52
	53	#define CONFIG_BOARD_TYPES 1 /* support board types */
	54
	55	#undef CONFIG_BOOTARGS
	56	#define CONFIG_BOOTCOMMAND \
53677ef1 WD	57	"bootp; " \
	58	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
	59	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
75dc29eb WD	60	"bootm"
	61
	62	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	63	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
	64
	65	#undef CONFIG_WATCHDOG /* watchdog disabled */
	66
	67	#undef CONFIG_STATUS_LED /* Status LED not enabled */
	68
	69	#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
	70
18225e8d JL	71	/*
	72	* BOOTP options
	73	*/
	74	#define CONFIG_BOOTP_SUBNETMASK
	75	#define CONFIG_BOOTP_GATEWAY
	76	#define CONFIG_BOOTP_HOSTNAME
	77	#define CONFIG_BOOTP_BOOTPATH
	78	#define CONFIG_BOOTP_BOOTFILESIZE
	79
75dc29eb WD	80
	81	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	82
75dc29eb	83
fe7f782d JL	84	/*
	85	* Command line configuration.
	86	*/
	87	#include <config_cmd_default.h>
	88
	89	#define CONFIG_CMD_DHCP
	90	#define CONFIG_CMD_DATE
	91
75dc29eb WD	92
	93	/*
	94	* Miscellaneous configurable options
	95	*/
	96	#define CFG_LONGHELP /* undef to save memory */
	97	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
fe7f782d	98	#if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG)
75dc29eb WD	99	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	100	#else
	101	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	102	#endif
	103	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	104	#define CFG_MAXARGS 16 /* max number of command args */
	105	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	106
	107	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	108	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
	109
	110	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	111
	112	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	113
	114	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	115
	116	/*
	117	* Low Level Configuration Settings
	118	* (address mappings, register initial values, etc.)
	119	* You should know what you are doing if you make changes here.
	120	*/
	121	/*-----------------------------------------------------------------------
	122	* Internal Memory Mapped Register
	123	*/
	124	#define CFG_IMMR 0xFFF00000
	125
	126	/*-----------------------------------------------------------------------
	127	* Definitions for initial stack pointer and data area (in DPRAM)
	128	*/
	129	#define CFG_INIT_RAM_ADDR CFG_IMMR
	130	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	131	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	132	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	133	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	134
	135	/*-----------------------------------------------------------------------
	136	* Start addresses for the final memory configuration
	137	* (Set up by the startup code)
	138	* Please note that CFG_SDRAM_BASE _must_ start at 0
	139	*/
	140	#define CFG_SDRAM_BASE 0x00000000
	141	#define CFG_FLASH_BASE 0x40000000
	142	#if defined(DEBUG)
	143	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	144	#else
	145	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	146	#endif
	147	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	148	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	149
	150	/*
	151	* For booting Linux, the board info and command line data
	152	* have to be in the first 8 MB of memory, since this is
	153	* the maximum mapped by the Linux kernel during initialization.
	154	*/
	155	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	156
	157	/*-----------------------------------------------------------------------
	158	* FLASH organization
	159	*/
7c803be2 WD	160	/* use CFI flash driver */
	161	#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
	162	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
	163	#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
	164	#define CFG_FLASH_EMPTY_INFO
	165	#define CFG_FLASH_USE_BUFFER_WRITE 1
75dc29eb	166	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
7c803be2	167	#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
75dc29eb	168
5a1aceb0	169	#define CONFIG_ENV_IS_IN_FLASH 1
7c803be2	170	#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
0e8d1586	171	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
75dc29eb	172
7c803be2 WD	173	#define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */
7c803be2 WD	174
75dc29eb WD	175	/*-----------------------------------------------------------------------
	176	* Hardware Information Block
	177	*/
	178	#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
	179	#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
	180	#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
	181
	182	/*-----------------------------------------------------------------------
	183	* Cache Configuration
	184	*/
	185	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
fe7f782d	186	#if defined(CONFIG_CMD_KGDB)
75dc29eb WD	187	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	188	#endif
	189
	190	/*-----------------------------------------------------------------------
	191	* SYPCR - System Protection Control 11-9
	192	* SYPCR can only be written once after reset!
	193	*-----------------------------------------------------------------------
	194	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	195	*/
	196	#if defined(CONFIG_WATCHDOG)
	197	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	198	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	199	#else
	200	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	201	#endif
	202
	203	/*-----------------------------------------------------------------------
	204	* SIUMCR - SIU Module Configuration 11-6
	205	*-----------------------------------------------------------------------
	206	* PCMCIA config., multi-function pin tri-state
	207	*/
	208	#ifndef CONFIG_CAN_DRIVER
	209	#define CFG_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
	210	#else /* we must activate GPL5 in the SIUMCR for CAN */
	211	#define CFG_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
	212	#endif /* CONFIG_CAN_DRIVER */
	213
	214	/*-----------------------------------------------------------------------
	215	* TBSCR - Time Base Status and Control 11-26
	216	*-----------------------------------------------------------------------
	217	* Clear Reference Interrupt Status, Timebase freezing enabled
	218	*/
	219	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
	220
	221	/*-----------------------------------------------------------------------
	222	* RTCSC - Real-Time Clock Status and Control Register 11-27
	223	*-----------------------------------------------------------------------
	224	*/
	225	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)
	226
	227	/*-----------------------------------------------------------------------
	228	* PISCR - Periodic Interrupt Status and Control 11-31
	229	*-----------------------------------------------------------------------
	230	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	231	*/
	232	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	233
	234	/*-----------------------------------------------------------------------
	235	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	236	*-----------------------------------------------------------------------
	237	* Reset PLL lock status sticky bit, timer expired status bit and timer
	238	* interrupt status bit
	239	*
	240	* If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
	241	*/
	242	#ifdef TQM8xxL_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
	243	#define CFG_PLPRCR \
	244	( (5-1)<<PLPRCR_MF_SHIFT \| PLPRCR_TEXPS \| PLPRCR_TMIST )
	245	#else
	246	#define CFG_PLPRCR (PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)
	247	#endif /* TQM8xxL_80MHz */
	248
	249	/*-----------------------------------------------------------------------
	250	* SCCR - System Clock and reset Control Register 15-27
251	*-----------------------------------------------------------------------
252	* Set clock output, timebase and RTC source and divider,
253	* power management and some other internal clocks
254	*/
255	#define SCCR_MASK SCCR_EBDF11
256	#ifdef TQM8xxL_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
257	#define CFG_SCCR (/* SCCR_TBS \| */ \
258	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
259	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
260	SCCR_DFALCD00)
261	#else /* up to 50 MHz we use a 1:1 clock */
262	#define CFG_SCCR (SCCR_TBS \| \
263	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
264	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
265	SCCR_DFALCD00)
266	#endif /* TQM8xxL_80MHz */
267
268	/*-----------------------------------------------------------------------
269	* PCMCIA stuff
270	*-----------------------------------------------------------------------
271	*
272	*/
273	#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
274	#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
275	#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
276	#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
277	#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
278	#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
279	#define CFG_PCMCIA_IO_ADDR (0xEC000000)
280	#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
281
282	/*-----------------------------------------------------------------------
283	*
284	*-----------------------------------------------------------------------
285	*
286	*/
75dc29eb WD	287	#define CFG_DER 0
	288
	289	/*
	290	* Init Memory Controller:
	291	*
	292	* BR0/1 and OR0/1 (FLASH)
	293	*/
	294
	295	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	296	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
	297
	298	/* used to re-map FLASH both when starting from SRAM or FLASH:
	299	* restrict access enough to keep SRAM working (if any)
	300	* but not too much to meddle with FLASH accesses
	301	*/
	302	#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
	303	#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
	304
	305	/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
	306	#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_ACS_DIV2 \| OR_BI \| \
	307	OR_SCY_5_CLK \| OR_EHTR)
	308
	309	#define CFG_OR0_REMAP (CFG_REMAP_OR_AM \| CFG_OR_TIMING_FLASH)
	310	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
	311	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
	312
	313	#define CFG_OR1_REMAP CFG_OR0_REMAP
	314	#define CFG_OR1_PRELIM CFG_OR0_PRELIM
	315	#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_V )
	316
	317	/*
	318	* BR2/3 and OR2/3 (SDRAM)
	319	*
	320	*/
	321	#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
	322	#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
	323	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
	324
	325	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
	326	#define CFG_OR_TIMING_SDRAM 0x00000A00
	327
	328	#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_SDRAM )
	329	#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	330
	331	#ifndef CONFIG_CAN_DRIVER
	332	#define CFG_OR3_PRELIM CFG_OR2_PRELIM
	333	#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	334	#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
	335	#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
	336	#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
	337	#define CFG_OR3_CAN (CFG_CAN_OR_AM \| OR_G5LA \| OR_BI)
	338	#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) \| \
	339	BR_PS_8 \| BR_MS_UPMB \| BR_V )
	340	#endif /* CONFIG_CAN_DRIVER */
	341
	342	/*
	343	* Memory Periodic Timer Prescaler
	344	*/
	345
	346	/* periodic timer for refresh */
	347	#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
	348
	349	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
	350	#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
351	#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
352
353	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
354	#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
355	#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
356
357	/*
358	* MAMR settings for SDRAM
359	*/
360
361	/* 8 column SDRAM */
362	#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
363	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
364	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
365	/* 9 column SDRAM */
366	#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
367	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
368	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
369
370
371	/*
372	* Internal Definitions
373	*
374	* Boot Flags
375	*/
376	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
377	#define BOOTFLAG_WARM 0x02 /* Software reboot */
378
379	#endif /* __CONFIG_H */