]>
Commit | Line | Data |
---|---|---|
b841b6e9 | 1 | /* |
2 | * Copyright (C) 2011 Andes Technology Corporation | |
3 | * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> | |
4 | * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> | |
5 | * | |
6 | * SPDX-License-Identifier: GPL-2.0+ | |
7 | */ | |
8 | ||
9 | #ifndef __CONFIG_H | |
10 | #define __CONFIG_H | |
11 | ||
12 | #include <asm/arch-ae3xx/ae3xx.h> | |
13 | ||
14 | /* | |
15 | * CPU and Board Configuration Options | |
16 | */ | |
17 | #define CONFIG_USE_INTERRUPT | |
18 | ||
19 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
20 | ||
21 | #define CONFIG_SKIP_TRUNOFF_WATCHDOG | |
22 | ||
23 | #define CONFIG_CMDLINE_EDITING | |
24 | #define CONFIG_PANIC_HANG | |
25 | ||
26 | #define CONFIG_SYS_ICACHE_OFF | |
27 | #define CONFIG_SYS_DCACHE_OFF | |
28 | ||
29 | #define CONFIG_BOOTP_SEND_HOSTNAME | |
30 | #define CONFIG_BOOTP_SERVERIP | |
31 | ||
32 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
33 | #define CONFIG_SYS_TEXT_BASE 0x00500000 | |
34 | #ifdef CONFIG_OF_CONTROL | |
35 | #undef CONFIG_OF_SEPARATE | |
36 | #define CONFIG_OF_EMBED | |
37 | #endif | |
38 | #else | |
39 | ||
40 | #define CONFIG_SYS_TEXT_BASE 0x80000000 | |
41 | #endif | |
42 | ||
43 | /* | |
44 | * Timer | |
45 | */ | |
46 | #define CONFIG_SYS_CLK_FREQ 39062500 | |
47 | #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ | |
48 | ||
49 | /* | |
50 | * Use Externel CLOCK or PCLK | |
51 | */ | |
52 | #undef CONFIG_FTRTC010_EXTCLK | |
53 | ||
54 | #ifndef CONFIG_FTRTC010_EXTCLK | |
55 | #define CONFIG_FTRTC010_PCLK | |
56 | #endif | |
57 | ||
58 | #ifdef CONFIG_FTRTC010_EXTCLK | |
59 | #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ | |
60 | #else | |
61 | #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ | |
62 | #endif | |
63 | ||
64 | #define TIMER_LOAD_VAL 0xffffffff | |
65 | ||
66 | /* | |
67 | * Real Time Clock | |
68 | */ | |
69 | #define CONFIG_RTC_FTRTC010 | |
70 | ||
71 | /* | |
72 | * Real Time Clock Divider | |
73 | * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) | |
74 | */ | |
75 | #define OSC_5MHZ (5*1000000) | |
76 | #define OSC_CLK (4*OSC_5MHZ) | |
77 | #define RTC_DIV_COUNT (0.5) /* Why?? */ | |
78 | ||
79 | /* | |
80 | * Serial console configuration | |
81 | */ | |
82 | ||
83 | /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ | |
84 | #define CONFIG_CONS_INDEX 1 | |
85 | #define CONFIG_SYS_NS16550_SERIAL | |
86 | #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE | |
87 | #ifndef CONFIG_DM_SERIAL | |
88 | #define CONFIG_SYS_NS16550_REG_SIZE -4 | |
89 | #endif | |
90 | #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ | |
91 | ||
b841b6e9 | 92 | /* |
93 | * SD (MMC) controller | |
94 | */ | |
95 | #define CONFIG_FTSDC010 | |
96 | #define CONFIG_FTSDC010_NUMBER 1 | |
97 | #define CONFIG_FTSDC010_SDIO | |
98 | ||
99 | /* | |
100 | * Miscellaneous configurable options | |
101 | */ | |
102 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
103 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
104 | ||
105 | /* Print Buffer Size */ | |
106 | #define CONFIG_SYS_PBSIZE \ | |
107 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
108 | ||
109 | /* max number of command args */ | |
110 | #define CONFIG_SYS_MAXARGS 16 | |
111 | ||
112 | /* Boot Argument Buffer Size */ | |
113 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
114 | ||
115 | /* | |
116 | * Size of malloc() pool | |
117 | */ | |
118 | /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ | |
119 | #define CONFIG_SYS_MALLOC_LEN (512 << 10) | |
120 | ||
121 | /* | |
122 | * Physical Memory Map | |
123 | */ | |
124 | #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ | |
125 | ||
126 | #define PHYS_SDRAM_1 \ | |
127 | (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ | |
128 | ||
129 | #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ | |
130 | ||
131 | #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ | |
132 | #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ | |
133 | ||
134 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 | |
135 | ||
136 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ | |
137 | GENERATED_GBL_DATA_SIZE) | |
138 | ||
139 | /* | |
140 | * Load address and memory test area should agree with | |
141 | * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. | |
142 | */ | |
143 | #define CONFIG_SYS_LOAD_ADDR 0x300000 | |
144 | ||
145 | /* memtest works on 63 MB in DRAM */ | |
146 | #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 | |
147 | #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) | |
148 | ||
149 | /* | |
150 | * Static memory controller configuration | |
151 | */ | |
152 | #define CONFIG_FTSMC020 | |
153 | ||
154 | #ifdef CONFIG_FTSMC020 | |
155 | #include <faraday/ftsmc020.h> | |
156 | ||
157 | #define CONFIG_SYS_FTSMC020_CONFIGS { \ | |
158 | { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ | |
159 | { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ | |
160 | } | |
161 | ||
162 | #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ | |
163 | #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ | |
164 | FTSMC020_BANK_SIZE_32M | \ | |
165 | FTSMC020_BANK_MBW_32) | |
166 | ||
167 | #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ | |
168 | FTSMC020_TPR_AST(1) | \ | |
169 | FTSMC020_TPR_CTW(1) | \ | |
170 | FTSMC020_TPR_ATI(1) | \ | |
171 | FTSMC020_TPR_AT2(1) | \ | |
172 | FTSMC020_TPR_WTC(1) | \ | |
173 | FTSMC020_TPR_AHT(1) | \ | |
174 | FTSMC020_TPR_TRNA(1)) | |
175 | #endif | |
176 | ||
177 | /* | |
178 | * FLASH on ADP_AG101P is connected to BANK0 | |
179 | * Just disalbe the other BANK to avoid detection error. | |
180 | */ | |
181 | #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ | |
182 | FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ | |
183 | FTSMC020_BANK_SIZE_32M | \ | |
184 | FTSMC020_BANK_MBW_32) | |
185 | ||
186 | #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ | |
187 | FTSMC020_TPR_CTW(3) | \ | |
188 | FTSMC020_TPR_ATI(0xf) | \ | |
189 | FTSMC020_TPR_AT2(3) | \ | |
190 | FTSMC020_TPR_WTC(3) | \ | |
191 | FTSMC020_TPR_AHT(3) | \ | |
192 | FTSMC020_TPR_TRNA(0xf)) | |
193 | ||
194 | #define FTSMC020_BANK1_CONFIG (0x00) | |
195 | #define FTSMC020_BANK1_TIMING (0x00) | |
196 | #endif /* CONFIG_FTSMC020 */ | |
197 | ||
198 | /* | |
199 | * FLASH and environment organization | |
200 | */ | |
201 | /* use CFI framework */ | |
202 | #define CONFIG_SYS_FLASH_CFI | |
203 | #define CONFIG_FLASH_CFI_DRIVER | |
204 | ||
205 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
206 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
207 | #define CONFIG_SYS_CFI_FLASH_STATUS_POLL | |
208 | ||
209 | /* support JEDEC */ | |
210 | #ifdef CONFIG_CFI_FLASH | |
211 | #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 | |
212 | #endif | |
213 | ||
214 | /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ | |
215 | #define PHYS_FLASH_1 0x88000000 /* BANK 0 */ | |
216 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
217 | #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } | |
218 | #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 | |
219 | ||
220 | #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ | |
221 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ | |
222 | ||
223 | /* max number of memory banks */ | |
224 | /* | |
225 | * There are 4 banks supported for this Controller, | |
226 | * but we have only 1 bank connected to flash on board | |
227 | */ | |
228 | #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT | |
229 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
230 | #endif | |
231 | #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} | |
232 | ||
233 | /* max number of sectors on one chip */ | |
234 | #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) | |
235 | #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE | |
236 | #define CONFIG_SYS_MAX_FLASH_SECT 512 | |
237 | ||
238 | /* environments */ | |
239 | #define CONFIG_ENV_IS_IN_FLASH | |
240 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) | |
241 | #define CONFIG_ENV_SIZE 8192 | |
242 | #define CONFIG_ENV_OVERWRITE | |
243 | ||
244 | /* | |
245 | * For booting Linux, the board info and command line data | |
246 | * have to be in the first 16 MB of memory, since this is | |
247 | * the maximum mapped by the Linux kernel during initialization. | |
248 | */ | |
249 | ||
250 | /* Initial Memory map for Linux*/ | |
251 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) | |
252 | /* Increase max gunzip size */ | |
253 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) | |
254 | ||
255 | #endif /* __CONFIG_H */ |