]>
Commit | Line | Data |
---|---|---|
6cb144bc ML |
1 | /* |
2 | * Copyright (C) 2011 Andes Technology Corporation | |
3 | * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> | |
4 | * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> | |
5 | * | |
1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
6cb144bc ML |
7 | */ |
8 | ||
9 | #ifndef __CONFIG_H | |
10 | #define __CONFIG_H | |
11 | ||
7e3f94e1 | 12 | #include <asm/arch-ag101/ag101.h> |
6cb144bc ML |
13 | |
14 | /* | |
15 | * CPU and Board Configuration Options | |
16 | */ | |
17 | #define CONFIG_ADP_AG101P | |
18 | ||
19 | #define CONFIG_USE_INTERRUPT | |
20 | ||
21 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
22 | ||
2e88bb28 KHH |
23 | #define CONFIG_SYS_GENERIC_GLOBAL_DATA |
24 | ||
e3c58b02 | 25 | /* |
26 | * Definitions related to passing arguments to kernel. | |
27 | */ | |
28 | #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ | |
29 | #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ | |
30 | #define CONFIG_INITRD_TAG /* send initrd params */ | |
2e88bb28 | 31 | #define CONFIG_NEEDS_MANUAL_RELOC |
e3c58b02 | 32 | |
6cb144bc ML |
33 | #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
34 | #define CONFIG_MEM_REMAP | |
35 | #endif | |
36 | ||
37 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
2e88bb28 KHH |
38 | #define CONFIG_SYS_TEXT_BASE 0x00500000 |
39 | #else | |
40 | #ifdef CONFIG_MEM_REMAP | |
41 | #define CONFIG_SYS_TEXT_BASE 0x80000000 | |
6cb144bc ML |
42 | #else |
43 | #define CONFIG_SYS_TEXT_BASE 0x00000000 | |
44 | #endif | |
2e88bb28 | 45 | #endif |
6cb144bc ML |
46 | |
47 | /* | |
48 | * Timer | |
49 | */ | |
6cb144bc ML |
50 | #define CONFIG_SYS_CLK_FREQ 39062500 |
51 | #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ | |
52 | ||
53 | /* | |
54 | * Use Externel CLOCK or PCLK | |
55 | */ | |
56 | #undef CONFIG_FTRTC010_EXTCLK | |
57 | ||
58 | #ifndef CONFIG_FTRTC010_EXTCLK | |
59 | #define CONFIG_FTRTC010_PCLK | |
60 | #endif | |
61 | ||
62 | #ifdef CONFIG_FTRTC010_EXTCLK | |
63 | #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ | |
64 | #else | |
65 | #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ | |
66 | #endif | |
67 | ||
68 | #define TIMER_LOAD_VAL 0xffffffff | |
69 | ||
70 | /* | |
71 | * Real Time Clock | |
72 | */ | |
73 | #define CONFIG_RTC_FTRTC010 | |
74 | ||
75 | /* | |
76 | * Real Time Clock Divider | |
77 | * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) | |
78 | */ | |
79 | #define OSC_5MHZ (5*1000000) | |
80 | #define OSC_CLK (4*OSC_5MHZ) | |
81 | #define RTC_DIV_COUNT (0.5) /* Why?? */ | |
82 | ||
83 | /* | |
84 | * Serial console configuration | |
85 | */ | |
86 | ||
87 | /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ | |
88 | #define CONFIG_BAUDRATE 38400 | |
89 | #define CONFIG_CONS_INDEX 1 | |
6cb144bc ML |
90 | #define CONFIG_SYS_NS16550_SERIAL |
91 | #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE | |
92 | #define CONFIG_SYS_NS16550_REG_SIZE -4 | |
93 | #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ | |
94 | ||
6cb144bc ML |
95 | /* |
96 | * Ethernet | |
97 | */ | |
98 | #define CONFIG_FTMAC100 | |
99 | ||
100 | #define CONFIG_BOOTDELAY 3 | |
101 | ||
102 | /* | |
103 | * SD (MMC) controller | |
104 | */ | |
105 | #define CONFIG_MMC | |
106 | #define CONFIG_CMD_MMC | |
107 | #define CONFIG_GENERIC_MMC | |
108 | #define CONFIG_DOS_PARTITION | |
109 | #define CONFIG_FTSDC010 | |
110 | #define CONFIG_FTSDC010_NUMBER 1 | |
61ccf082 | 111 | #define CONFIG_FTSDC010_SDIO |
6cb144bc | 112 | #define CONFIG_CMD_FAT |
61ccf082 | 113 | #define CONFIG_CMD_EXT2 |
6cb144bc ML |
114 | |
115 | /* | |
116 | * Command line configuration. | |
117 | */ | |
6cb144bc ML |
118 | #define CONFIG_CMD_CACHE |
119 | #define CONFIG_CMD_DATE | |
120 | #define CONFIG_CMD_PING | |
121 | ||
122 | /* | |
123 | * Miscellaneous configurable options | |
124 | */ | |
125 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
6cb144bc ML |
126 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
127 | ||
128 | /* Print Buffer Size */ | |
129 | #define CONFIG_SYS_PBSIZE \ | |
130 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
131 | ||
132 | /* max number of command args */ | |
133 | #define CONFIG_SYS_MAXARGS 16 | |
134 | ||
135 | /* Boot Argument Buffer Size */ | |
136 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
137 | ||
6cb144bc ML |
138 | /* |
139 | * Size of malloc() pool | |
140 | */ | |
141 | /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ | |
142 | #define CONFIG_SYS_MALLOC_LEN (512 << 10) | |
143 | ||
6cb144bc ML |
144 | /* |
145 | * AHB Controller configuration | |
146 | */ | |
147 | #define CONFIG_FTAHBC020S | |
148 | ||
149 | #ifdef CONFIG_FTAHBC020S | |
150 | #include <faraday/ftahbc020s.h> | |
151 | ||
152 | /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ | |
153 | #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 | |
154 | ||
155 | /* | |
156 | * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, | |
157 | * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote | |
158 | * in C language. | |
159 | */ | |
160 | #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ | |
161 | (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ | |
162 | FTAHBC020S_SLAVE_BSR_SIZE(0xb)) | |
163 | #endif | |
164 | ||
165 | /* | |
166 | * Watchdog | |
167 | */ | |
168 | #define CONFIG_FTWDT010_WATCHDOG | |
169 | ||
170 | /* | |
171 | * PMU Power controller configuration | |
172 | */ | |
173 | #define CONFIG_PMU | |
174 | #define CONFIG_FTPMU010_POWER | |
175 | ||
176 | #ifdef CONFIG_FTPMU010_POWER | |
177 | #include <faraday/ftpmu010.h> | |
178 | #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E | |
179 | #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ | |
180 | FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ | |
181 | FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ | |
182 | FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ | |
183 | FTPMU010_SDRAMHTC_CKE_DCSR | \ | |
184 | FTPMU010_SDRAMHTC_DQM_DCSR | \ | |
185 | FTPMU010_SDRAMHTC_SDCLK_DCSR) | |
186 | #endif | |
187 | ||
188 | /* | |
189 | * SDRAM controller configuration | |
190 | */ | |
191 | #define CONFIG_FTSDMC021 | |
192 | ||
193 | #ifdef CONFIG_FTSDMC021 | |
194 | #include <faraday/ftsdmc021.h> | |
195 | ||
196 | #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ | |
197 | FTSDMC021_TP1_TRP(1) | \ | |
198 | FTSDMC021_TP1_TRCD(1) | \ | |
199 | FTSDMC021_TP1_TRF(3) | \ | |
200 | FTSDMC021_TP1_TWR(1) | \ | |
201 | FTSDMC021_TP1_TCL(2)) | |
202 | ||
203 | #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ | |
204 | FTSDMC021_TP2_INI_REFT(8) | \ | |
205 | FTSDMC021_TP2_REF_INTV(0x180)) | |
206 | ||
207 | /* | |
208 | * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, | |
209 | * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in | |
210 | * C language. | |
211 | */ | |
212 | #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ | |
213 | FTSDMC021_CR1_DSZ(3) | \ | |
214 | FTSDMC021_CR1_MBW(2) | \ | |
215 | FTSDMC021_CR1_BNKSIZE(6)) | |
216 | ||
217 | #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ | |
218 | FTSDMC021_CR2_IREF | \ | |
219 | FTSDMC021_CR2_ISMR) | |
220 | ||
221 | #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE | |
222 | #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ | |
223 | CONFIG_SYS_FTSDMC021_BANK0_BASE) | |
224 | ||
3c016704 | 225 | #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ |
226 | (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) | |
227 | #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ | |
228 | CONFIG_SYS_FTSDMC021_BANK1_BASE) | |
6cb144bc ML |
229 | #endif |
230 | ||
231 | /* | |
232 | * Physical Memory Map | |
233 | */ | |
2e88bb28 KHH |
234 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT |
235 | #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ | |
236 | #else | |
237 | #ifdef CONFIG_MEM_REMAP | |
238 | #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ | |
239 | #else | |
240 | #define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ | |
6cb144bc | 241 | #endif |
6cb144bc | 242 | #endif |
2e88bb28 | 243 | |
3c016704 | 244 | #define PHYS_SDRAM_1 \ |
245 | (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ | |
6cb144bc | 246 | |
3c016704 | 247 | #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ |
2e88bb28 KHH |
248 | |
249 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
250 | #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ | |
251 | #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ | |
252 | #else | |
253 | #ifdef CONFIG_MEM_REMAP | |
254 | #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ | |
255 | #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ | |
256 | #else | |
257 | #define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */ | |
258 | #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ | |
259 | #endif | |
260 | #endif | |
6cb144bc ML |
261 | |
262 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 | |
263 | ||
264 | #ifdef CONFIG_MEM_REMAP | |
265 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ | |
266 | GENERATED_GBL_DATA_SIZE) | |
267 | #else | |
268 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ | |
269 | GENERATED_GBL_DATA_SIZE) | |
270 | #endif /* CONFIG_MEM_REMAP */ | |
271 | ||
272 | /* | |
273 | * Load address and memory test area should agree with | |
274 | * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. | |
275 | */ | |
276 | #define CONFIG_SYS_LOAD_ADDR 0x300000 | |
277 | ||
278 | /* memtest works on 63 MB in DRAM */ | |
279 | #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 | |
280 | #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) | |
281 | ||
282 | /* | |
283 | * Static memory controller configuration | |
284 | */ | |
285 | #define CONFIG_FTSMC020 | |
286 | ||
287 | #ifdef CONFIG_FTSMC020 | |
288 | #include <faraday/ftsmc020.h> | |
289 | ||
290 | #define CONFIG_SYS_FTSMC020_CONFIGS { \ | |
291 | { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ | |
292 | { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ | |
293 | } | |
294 | ||
295 | #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ | |
296 | #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ | |
297 | FTSMC020_BANK_SIZE_32M | \ | |
298 | FTSMC020_BANK_MBW_32) | |
299 | ||
300 | #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ | |
301 | FTSMC020_TPR_AST(1) | \ | |
302 | FTSMC020_TPR_CTW(1) | \ | |
303 | FTSMC020_TPR_ATI(1) | \ | |
304 | FTSMC020_TPR_AT2(1) | \ | |
305 | FTSMC020_TPR_WTC(1) | \ | |
306 | FTSMC020_TPR_AHT(1) | \ | |
307 | FTSMC020_TPR_TRNA(1)) | |
308 | #endif | |
309 | ||
310 | /* | |
311 | * FLASH on ADP_AG101P is connected to BANK0 | |
312 | * Just disalbe the other BANK to avoid detection error. | |
313 | */ | |
314 | #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ | |
315 | FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ | |
316 | FTSMC020_BANK_SIZE_32M | \ | |
317 | FTSMC020_BANK_MBW_32) | |
318 | ||
319 | #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ | |
320 | FTSMC020_TPR_CTW(3) | \ | |
321 | FTSMC020_TPR_ATI(0xf) | \ | |
322 | FTSMC020_TPR_AT2(3) | \ | |
323 | FTSMC020_TPR_WTC(3) | \ | |
324 | FTSMC020_TPR_AHT(3) | \ | |
325 | FTSMC020_TPR_TRNA(0xf)) | |
326 | ||
327 | #define FTSMC020_BANK1_CONFIG (0x00) | |
328 | #define FTSMC020_BANK1_TIMING (0x00) | |
329 | #endif /* CONFIG_FTSMC020 */ | |
330 | ||
331 | /* | |
332 | * FLASH and environment organization | |
333 | */ | |
334 | /* use CFI framework */ | |
335 | #define CONFIG_SYS_FLASH_CFI | |
336 | #define CONFIG_FLASH_CFI_DRIVER | |
337 | ||
338 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
339 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
2e88bb28 | 340 | #define CONFIG_SYS_CFI_FLASH_STATUS_POLL |
6cb144bc ML |
341 | |
342 | /* support JEDEC */ | |
343 | ||
344 | /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ | |
345 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
2e88bb28 KHH |
346 | #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ |
347 | #else | |
6cb144bc ML |
348 | #ifdef CONFIG_MEM_REMAP |
349 | #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ | |
350 | #else | |
351 | #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ | |
2e88bb28 | 352 | #endif |
6cb144bc | 353 | #endif /* CONFIG_MEM_REMAP */ |
6cb144bc ML |
354 | |
355 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
356 | #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } | |
357 | #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 | |
358 | ||
359 | #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ | |
360 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ | |
361 | ||
362 | /* max number of memory banks */ | |
363 | /* | |
364 | * There are 4 banks supported for this Controller, | |
365 | * but we have only 1 bank connected to flash on board | |
366 | */ | |
367 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
2e88bb28 | 368 | #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} |
6cb144bc ML |
369 | |
370 | /* max number of sectors on one chip */ | |
2e88bb28 | 371 | #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) |
6cb144bc | 372 | #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE |
2e88bb28 | 373 | #define CONFIG_SYS_MAX_FLASH_SECT 512 |
6cb144bc ML |
374 | |
375 | /* environments */ | |
376 | #define CONFIG_ENV_IS_IN_FLASH | |
377 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) | |
378 | #define CONFIG_ENV_SIZE 8192 | |
379 | #define CONFIG_ENV_OVERWRITE | |
380 | ||
381 | #endif /* __CONFIG_H */ |