]>
Commit | Line | Data |
---|---|---|
6cb144bc ML |
1 | /* |
2 | * Copyright (C) 2011 Andes Technology Corporation | |
3 | * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> | |
4 | * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> | |
5 | * | |
1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
6cb144bc ML |
7 | */ |
8 | ||
9 | #ifndef __CONFIG_H | |
10 | #define __CONFIG_H | |
11 | ||
7e3f94e1 | 12 | #include <asm/arch-ag101/ag101.h> |
6cb144bc ML |
13 | |
14 | /* | |
15 | * CPU and Board Configuration Options | |
16 | */ | |
17 | #define CONFIG_ADP_AG101P | |
18 | ||
19 | #define CONFIG_USE_INTERRUPT | |
20 | ||
21 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
22 | ||
b841b6e9 | 23 | #define CONFIG_CMDLINE_EDITING |
24 | ||
25 | #define CONFIG_SYS_ICACHE_OFF | |
26 | #define CONFIG_SYS_DCACHE_OFF | |
27 | ||
28 | #define CONFIG_BOOTP_SEND_HOSTNAME | |
29 | #define CONFIG_BOOTP_SERVERIP | |
e3c58b02 | 30 | |
6cb144bc ML |
31 | #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
32 | #define CONFIG_MEM_REMAP | |
33 | #endif | |
34 | ||
35 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
2e88bb28 | 36 | #define CONFIG_SYS_TEXT_BASE 0x00500000 |
86132af7 | 37 | #ifdef CONFIG_OF_CONTROL |
38 | #undef CONFIG_OF_SEPARATE | |
39 | #define CONFIG_OF_EMBED | |
40 | #endif | |
2e88bb28 KHH |
41 | #else |
42 | #ifdef CONFIG_MEM_REMAP | |
43 | #define CONFIG_SYS_TEXT_BASE 0x80000000 | |
6cb144bc ML |
44 | #else |
45 | #define CONFIG_SYS_TEXT_BASE 0x00000000 | |
46 | #endif | |
2e88bb28 | 47 | #endif |
6cb144bc ML |
48 | |
49 | /* | |
50 | * Timer | |
51 | */ | |
6cb144bc ML |
52 | #define CONFIG_SYS_CLK_FREQ 39062500 |
53 | #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ | |
54 | ||
55 | /* | |
56 | * Use Externel CLOCK or PCLK | |
57 | */ | |
58 | #undef CONFIG_FTRTC010_EXTCLK | |
59 | ||
60 | #ifndef CONFIG_FTRTC010_EXTCLK | |
61 | #define CONFIG_FTRTC010_PCLK | |
62 | #endif | |
63 | ||
64 | #ifdef CONFIG_FTRTC010_EXTCLK | |
65 | #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ | |
66 | #else | |
67 | #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ | |
68 | #endif | |
69 | ||
70 | #define TIMER_LOAD_VAL 0xffffffff | |
71 | ||
72 | /* | |
73 | * Real Time Clock | |
74 | */ | |
75 | #define CONFIG_RTC_FTRTC010 | |
76 | ||
77 | /* | |
78 | * Real Time Clock Divider | |
79 | * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) | |
80 | */ | |
81 | #define OSC_5MHZ (5*1000000) | |
82 | #define OSC_CLK (4*OSC_5MHZ) | |
83 | #define RTC_DIV_COUNT (0.5) /* Why?? */ | |
84 | ||
85 | /* | |
86 | * Serial console configuration | |
87 | */ | |
88 | ||
89 | /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ | |
6cb144bc | 90 | #define CONFIG_CONS_INDEX 1 |
6cb144bc ML |
91 | #define CONFIG_SYS_NS16550_SERIAL |
92 | #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE | |
86132af7 | 93 | #ifndef CONFIG_DM_SERIAL |
6cb144bc | 94 | #define CONFIG_SYS_NS16550_REG_SIZE -4 |
86132af7 | 95 | #endif |
6cb144bc ML |
96 | #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ |
97 | ||
6cb144bc ML |
98 | /* |
99 | * Ethernet | |
100 | */ | |
101 | #define CONFIG_FTMAC100 | |
102 | ||
6cb144bc ML |
103 | /* |
104 | * SD (MMC) controller | |
105 | */ | |
6cb144bc ML |
106 | #define CONFIG_FTSDC010 |
107 | #define CONFIG_FTSDC010_NUMBER 1 | |
61ccf082 | 108 | #define CONFIG_FTSDC010_SDIO |
6cb144bc | 109 | |
6cb144bc ML |
110 | /* |
111 | * Miscellaneous configurable options | |
112 | */ | |
113 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
6cb144bc ML |
114 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
115 | ||
116 | /* Print Buffer Size */ | |
117 | #define CONFIG_SYS_PBSIZE \ | |
118 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
119 | ||
120 | /* max number of command args */ | |
121 | #define CONFIG_SYS_MAXARGS 16 | |
122 | ||
123 | /* Boot Argument Buffer Size */ | |
124 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
125 | ||
6cb144bc ML |
126 | /* |
127 | * Size of malloc() pool | |
128 | */ | |
129 | /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ | |
130 | #define CONFIG_SYS_MALLOC_LEN (512 << 10) | |
131 | ||
6cb144bc ML |
132 | /* |
133 | * AHB Controller configuration | |
134 | */ | |
135 | #define CONFIG_FTAHBC020S | |
136 | ||
137 | #ifdef CONFIG_FTAHBC020S | |
138 | #include <faraday/ftahbc020s.h> | |
139 | ||
140 | /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ | |
141 | #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 | |
142 | ||
143 | /* | |
144 | * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, | |
145 | * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote | |
146 | * in C language. | |
147 | */ | |
148 | #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ | |
149 | (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ | |
150 | FTAHBC020S_SLAVE_BSR_SIZE(0xb)) | |
151 | #endif | |
152 | ||
153 | /* | |
154 | * Watchdog | |
155 | */ | |
156 | #define CONFIG_FTWDT010_WATCHDOG | |
157 | ||
158 | /* | |
159 | * PMU Power controller configuration | |
160 | */ | |
161 | #define CONFIG_PMU | |
162 | #define CONFIG_FTPMU010_POWER | |
163 | ||
164 | #ifdef CONFIG_FTPMU010_POWER | |
165 | #include <faraday/ftpmu010.h> | |
166 | #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E | |
167 | #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ | |
168 | FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ | |
169 | FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ | |
170 | FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ | |
171 | FTPMU010_SDRAMHTC_CKE_DCSR | \ | |
172 | FTPMU010_SDRAMHTC_DQM_DCSR | \ | |
173 | FTPMU010_SDRAMHTC_SDCLK_DCSR) | |
174 | #endif | |
175 | ||
176 | /* | |
177 | * SDRAM controller configuration | |
178 | */ | |
179 | #define CONFIG_FTSDMC021 | |
180 | ||
181 | #ifdef CONFIG_FTSDMC021 | |
182 | #include <faraday/ftsdmc021.h> | |
183 | ||
184 | #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ | |
185 | FTSDMC021_TP1_TRP(1) | \ | |
186 | FTSDMC021_TP1_TRCD(1) | \ | |
187 | FTSDMC021_TP1_TRF(3) | \ | |
188 | FTSDMC021_TP1_TWR(1) | \ | |
189 | FTSDMC021_TP1_TCL(2)) | |
190 | ||
191 | #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ | |
192 | FTSDMC021_TP2_INI_REFT(8) | \ | |
193 | FTSDMC021_TP2_REF_INTV(0x180)) | |
194 | ||
195 | /* | |
196 | * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, | |
197 | * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in | |
198 | * C language. | |
199 | */ | |
200 | #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ | |
201 | FTSDMC021_CR1_DSZ(3) | \ | |
202 | FTSDMC021_CR1_MBW(2) | \ | |
203 | FTSDMC021_CR1_BNKSIZE(6)) | |
204 | ||
205 | #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ | |
206 | FTSDMC021_CR2_IREF | \ | |
207 | FTSDMC021_CR2_ISMR) | |
208 | ||
209 | #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE | |
210 | #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ | |
211 | CONFIG_SYS_FTSDMC021_BANK0_BASE) | |
212 | ||
3c016704 | 213 | #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ |
214 | (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) | |
215 | #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ | |
216 | CONFIG_SYS_FTSDMC021_BANK1_BASE) | |
6cb144bc ML |
217 | #endif |
218 | ||
219 | /* | |
220 | * Physical Memory Map | |
221 | */ | |
2e88bb28 KHH |
222 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT |
223 | #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ | |
224 | #else | |
225 | #ifdef CONFIG_MEM_REMAP | |
226 | #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ | |
227 | #else | |
228 | #define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ | |
6cb144bc | 229 | #endif |
6cb144bc | 230 | #endif |
2e88bb28 | 231 | |
3c016704 | 232 | #define PHYS_SDRAM_1 \ |
233 | (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ | |
6cb144bc | 234 | |
3c016704 | 235 | #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ |
2e88bb28 KHH |
236 | |
237 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
238 | #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ | |
239 | #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ | |
240 | #else | |
241 | #ifdef CONFIG_MEM_REMAP | |
242 | #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ | |
243 | #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ | |
244 | #else | |
245 | #define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */ | |
246 | #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ | |
247 | #endif | |
248 | #endif | |
6cb144bc ML |
249 | |
250 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 | |
251 | ||
252 | #ifdef CONFIG_MEM_REMAP | |
253 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ | |
254 | GENERATED_GBL_DATA_SIZE) | |
255 | #else | |
256 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ | |
257 | GENERATED_GBL_DATA_SIZE) | |
258 | #endif /* CONFIG_MEM_REMAP */ | |
259 | ||
260 | /* | |
261 | * Load address and memory test area should agree with | |
a187559e | 262 | * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. |
6cb144bc ML |
263 | */ |
264 | #define CONFIG_SYS_LOAD_ADDR 0x300000 | |
265 | ||
266 | /* memtest works on 63 MB in DRAM */ | |
267 | #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 | |
268 | #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) | |
269 | ||
270 | /* | |
271 | * Static memory controller configuration | |
272 | */ | |
273 | #define CONFIG_FTSMC020 | |
274 | ||
275 | #ifdef CONFIG_FTSMC020 | |
276 | #include <faraday/ftsmc020.h> | |
277 | ||
278 | #define CONFIG_SYS_FTSMC020_CONFIGS { \ | |
279 | { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ | |
280 | { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ | |
281 | } | |
282 | ||
283 | #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ | |
284 | #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ | |
285 | FTSMC020_BANK_SIZE_32M | \ | |
286 | FTSMC020_BANK_MBW_32) | |
287 | ||
288 | #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ | |
289 | FTSMC020_TPR_AST(1) | \ | |
290 | FTSMC020_TPR_CTW(1) | \ | |
291 | FTSMC020_TPR_ATI(1) | \ | |
292 | FTSMC020_TPR_AT2(1) | \ | |
293 | FTSMC020_TPR_WTC(1) | \ | |
294 | FTSMC020_TPR_AHT(1) | \ | |
295 | FTSMC020_TPR_TRNA(1)) | |
296 | #endif | |
297 | ||
298 | /* | |
299 | * FLASH on ADP_AG101P is connected to BANK0 | |
300 | * Just disalbe the other BANK to avoid detection error. | |
301 | */ | |
302 | #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ | |
303 | FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ | |
304 | FTSMC020_BANK_SIZE_32M | \ | |
305 | FTSMC020_BANK_MBW_32) | |
306 | ||
307 | #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ | |
308 | FTSMC020_TPR_CTW(3) | \ | |
309 | FTSMC020_TPR_ATI(0xf) | \ | |
310 | FTSMC020_TPR_AT2(3) | \ | |
311 | FTSMC020_TPR_WTC(3) | \ | |
312 | FTSMC020_TPR_AHT(3) | \ | |
313 | FTSMC020_TPR_TRNA(0xf)) | |
314 | ||
315 | #define FTSMC020_BANK1_CONFIG (0x00) | |
316 | #define FTSMC020_BANK1_TIMING (0x00) | |
317 | #endif /* CONFIG_FTSMC020 */ | |
318 | ||
319 | /* | |
320 | * FLASH and environment organization | |
321 | */ | |
322 | /* use CFI framework */ | |
323 | #define CONFIG_SYS_FLASH_CFI | |
324 | #define CONFIG_FLASH_CFI_DRIVER | |
325 | ||
326 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
327 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
2e88bb28 | 328 | #define CONFIG_SYS_CFI_FLASH_STATUS_POLL |
6cb144bc ML |
329 | |
330 | /* support JEDEC */ | |
331 | ||
332 | /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ | |
333 | #ifdef CONFIG_SKIP_LOWLEVEL_INIT | |
2e88bb28 KHH |
334 | #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ |
335 | #else | |
6cb144bc ML |
336 | #ifdef CONFIG_MEM_REMAP |
337 | #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ | |
338 | #else | |
339 | #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ | |
2e88bb28 | 340 | #endif |
6cb144bc | 341 | #endif /* CONFIG_MEM_REMAP */ |
6cb144bc ML |
342 | |
343 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
344 | #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } | |
345 | #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 | |
346 | ||
347 | #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ | |
348 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ | |
349 | ||
350 | /* max number of memory banks */ | |
351 | /* | |
352 | * There are 4 banks supported for this Controller, | |
353 | * but we have only 1 bank connected to flash on board | |
354 | */ | |
b841b6e9 | 355 | #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT |
6cb144bc | 356 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
b841b6e9 | 357 | #endif |
2e88bb28 | 358 | #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} |
6cb144bc ML |
359 | |
360 | /* max number of sectors on one chip */ | |
2e88bb28 | 361 | #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) |
6cb144bc | 362 | #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE |
2e88bb28 | 363 | #define CONFIG_SYS_MAX_FLASH_SECT 512 |
6cb144bc ML |
364 | |
365 | /* environments */ | |
366 | #define CONFIG_ENV_IS_IN_FLASH | |
367 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) | |
368 | #define CONFIG_ENV_SIZE 8192 | |
369 | #define CONFIG_ENV_OVERWRITE | |
370 | ||
b841b6e9 | 371 | /* |
372 | * For booting Linux, the board info and command line data | |
373 | * have to be in the first 16 MB of memory, since this is | |
374 | * the maximum mapped by the Linux kernel during initialization. | |
375 | */ | |
376 | ||
377 | /* Initial Memory map for Linux*/ | |
378 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) | |
379 | /* Increase max gunzip size */ | |
380 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) | |
381 | ||
6cb144bc | 382 | #endif /* __CONFIG_H */ |