[thirdparty/u-boot.git] / include / configs / advantech_dms-ba16.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016 Timesys Corporation
 * Copyright (C) 2016 Advantech Corporation
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 */

#ifndef __ADVANTECH_DMSBA16_CONFIG_H
#define __ADVANTECH_DMSBA16_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>

#define CONFIG_BOARD_NAME	"Advantech DMS-BA16"

#define CONFIG_MXC_UART_BASE	UART4_BASE
#define CONSOLE_DEV	"ttymxc3"
#define CONFIG_EXTRA_BOOTARGS	"panic=10"

#define CONFIG_BOOT_DIR	""
#define CONFIG_LOADCMD "fatload"
#define CONFIG_RFSPART "2"

#define CONFIG_SUPPORT_EMMC_BOOT

#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_MXC_UART

#define CONFIG_MXC_OCOTP

/* SATA Configs */
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48

/* MMC Configs */
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_BOUNCE_BUFFER

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

#define CONFIG_USBD_HS

/* Networking Configs */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHY_ATHEROS

/* Serial Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_LOADADDR	0x12000000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"loadcmd=" CONFIG_LOADCMD "\0" \
	"rfspart=" CONFIG_RFSPART "\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	"loadbootscript=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${rfspart}; " \
	"run tryboot; " \
	\
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${rfspart}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"bmode usb; " \

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */

#define CONFIG_ENV_SIZE                 (8 * 1024)
#define CONFIG_ENV_OFFSET               (768 * 1024)
#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED

#ifndef CONFIG_SYS_DCACHE_OFF
#endif

#define CONFIG_SYS_FSL_USDHC_NUM        3

/* Framebuffer */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK         66000000

#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED            100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __ADVANTECH_DMSBA16_CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
ff383220 AB	2	/*
	3	* Copyright (C) 2016 Timesys Corporation
	4	* Copyright (C) 2016 Advantech Corporation
	5	* Copyright (C) 2012 Freescale Semiconductor, Inc.
ff383220 AB	6	*/
	7
	8	#ifndef __ADVANTECH_DMSBA16_CONFIG_H
	9	#define __ADVANTECH_DMSBA16_CONFIG_H
	10
	11	#include <asm/arch/imx-regs.h>
552a848e	12	#include <asm/mach-imx/gpio.h>
ff383220 AB	13
ff383220 AB	14	#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
ff383220 AB	15
ff383220 AB	16	#define CONFIG_MXC_UART_BASE UART4_BASE
12ca05a3	17	#define CONSOLE_DEV "ttymxc3"
ff383220 AB	18	#define CONFIG_EXTRA_BOOTARGS "panic=10"
	19
	20	#define CONFIG_BOOT_DIR ""
	21	#define CONFIG_LOADCMD "fatload"
	22	#define CONFIG_RFSPART "2"
	23
	24	#define CONFIG_SUPPORT_EMMC_BOOT
	25
	26	#include "mx6_common.h"
	27	#include <linux/sizes.h>
	28
ff383220 AB	29	#define CONFIG_CMDLINE_TAG
	30	#define CONFIG_SETUP_MEMORY_TAGS
	31	#define CONFIG_INITRD_TAG
	32	#define CONFIG_REVISION_TAG
	33	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	34
ff383220 AB	35	#define CONFIG_MXC_UART
ff383220 AB	36
ff383220 AB	37	#define CONFIG_MXC_OCOTP
	38
	39	/* SATA Configs */
ff383220 AB	40	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	41	#define CONFIG_DWC_AHSATA_PORT_ID 0
	42	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	43	#define CONFIG_LBA48
ff383220 AB	44
ff383220 AB	45	/* MMC Configs */
ff383220 AB	46	#define CONFIG_FSL_USDHC
ff383220 AB	47	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
ff383220	48	#define CONFIG_BOUNCE_BUFFER
ff383220 AB	49
ff383220 AB	50	/* USB Configs */
ff383220 AB	51	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	52	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	53	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	54	#define CONFIG_MXC_USB_FLAGS 0
ff383220 AB	55
ff383220 AB	56	#define CONFIG_USBD_HS
ff383220 AB	57
	58	/* Networking Configs */
	59	#define CONFIG_FEC_MXC
	60	#define CONFIG_MII
	61	#define IMX_FEC_BASE ENET_BASE_ADDR
	62	#define CONFIG_FEC_XCV_TYPE RGMII
	63	#define CONFIG_ETHPRIME "FEC"
	64	#define CONFIG_FEC_MXC_PHYADDR 4
ff383220 AB	65	#define CONFIG_PHY_ATHEROS
	66
	67	/* Serial Flash */
	68	#ifdef CONFIG_CMD_SF
ff383220 AB	69	#define CONFIG_SF_DEFAULT_BUS 0
	70	#define CONFIG_SF_DEFAULT_CS 0
	71	#define CONFIG_SF_DEFAULT_SPEED 20000000
	72	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	73	#endif
	74
	75	/* allow to overwrite serial and ethaddr */
	76	#define CONFIG_ENV_OVERWRITE
ff383220	77
ff383220	78	#define CONFIG_LOADADDR 0x12000000
ff383220 AB	79
	80	#define CONFIG_EXTRA_ENV_SETTINGS \
	81	"script=boot.scr\0" \
	82	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	83	"uboot=u-boot.imx\0" \
	84	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	85	"fdt_addr=0x18000000\0" \
	86	"boot_fdt=yes\0" \
	87	"ip_dyn=yes\0" \
12ca05a3	88	"console=" CONSOLE_DEV "\0" \
ff383220 AB	89	"fdt_high=0xffffffff\0" \
	90	"initrd_high=0xffffffff\0" \
	91	"sddev=0\0" \
	92	"emmcdev=1\0" \
	93	"partnum=1\0" \
	94	"loadcmd=" CONFIG_LOADCMD "\0" \
	95	"rfspart=" CONFIG_RFSPART "\0" \
	96	"update_sd_firmware=" \
	97	"if test ${ip_dyn} = yes; then " \
	98	"setenv get_cmd dhcp; " \
	99	"else " \
	100	"setenv get_cmd tftp; " \
	101	"fi; " \
	102	"if mmc dev ${mmcdev}; then " \
	103	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	104	"setexpr fw_sz ${filesize} / 0x200; " \
	105	"setexpr fw_sz ${fw_sz} + 1; " \
	106	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	107	"fi; " \
	108	"fi\0" \
	109	"update_sf_uboot=" \
	110	"if tftp $loadaddr $uboot; then " \
	111	"sf probe; " \
	112	"sf erase 0 0xC0000; " \
	113	"sf write $loadaddr 0x400 $filesize; " \
	114	"echo 'U-Boot upgraded. Please reset'; " \
	115	"fi\0" \
	116	"setargs=setenv bootargs console=${console},${baudrate} " \
	117	"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	118	"loadbootscript=" \
	119	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	120	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	121	" source\0" \
	122	"loadimage=" \
	123	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	124	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	125	"tryboot=" \
	126	"if run loadbootscript; then " \
	127	"run bootscript; " \
	128	"else " \
	129	"if run loadimage; then " \
	130	"run doboot; " \
	131	"fi; " \
	132	"fi;\0" \
	133	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	134	"run setargs; " \
	135	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	136	"if run loadfdt; then " \
	137	"bootm ${loadaddr} - ${fdt_addr}; " \
	138	"else " \
	139	"if test ${boot_fdt} = try; then " \
	140	"bootm; " \
	141	"else " \
	142	"echo WARN: Cannot load the DT; " \
	143	"fi; " \
	144	"fi; " \
	145	"else " \
	146	"bootm; " \
	147	"fi;\0" \
	148	"netargs=setenv bootargs console=${console},${baudrate} " \
	149	"root=/dev/nfs " \
	150	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	151	"netboot=echo Booting from net ...; " \
	152	"run netargs; " \
153	"if test ${ip_dyn} = yes; then " \
154	"setenv get_cmd dhcp; " \
155	"else " \
156	"setenv get_cmd tftp; " \
157	"fi; " \
158	"${get_cmd} ${image}; " \
159	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
160	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
161	"bootm ${loadaddr} - ${fdt_addr}; " \
162	"else " \
163	"if test ${boot_fdt} = try; then " \
164	"bootm; " \
165	"else " \
166	"echo WARN: Cannot load the DT; " \
167	"fi; " \
168	"fi; " \
169	"else " \
170	"bootm; " \
171	"fi;\0" \
172
173	#define CONFIG_BOOTCOMMAND \
174	"usb start; " \
175	"setenv dev usb; " \
176	"setenv devnum 0; " \
177	"setenv rootdev sda${rfspart}; " \
178	"run tryboot; " \
179	\
180	"setenv dev mmc; " \
181	"setenv rootdev mmcblk0p${rfspart}; " \
182	\
183	"setenv devnum ${sddev}; " \
184	"if mmc dev ${devnum}; then " \
185	"run tryboot; " \
186	"fi; " \
187	\
188	"setenv devnum ${emmcdev}; " \
189	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
190	"if mmc dev ${devnum}; then " \
191	"run tryboot; " \
192	"fi; " \
193	\
194	"bmode usb; " \
195
196	#define CONFIG_ARP_TIMEOUT 200UL
197
198	/* Miscellaneous configurable options */
ff383220	199
ff383220 AB	200	#define CONFIG_SYS_MEMTEST_START 0x10000000
	201	#define CONFIG_SYS_MEMTEST_END 0x10010000
	202	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	203
	204	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	205
ff383220 AB	206	/* Physical Memory Map */
	207	#define CONFIG_NR_DRAM_BANKS 1
	208	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	209
	210	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	211	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	212	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	213
	214	#define CONFIG_SYS_INIT_SP_OFFSET \
	215	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	216	#define CONFIG_SYS_INIT_SP_ADDR \
	217	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	218
	219	/* FLASH and environment organization */
ff383220	220
ff383220 AB	221	#define CONFIG_ENV_SIZE (8 * 1024)
	222	#define CONFIG_ENV_OFFSET (768 * 1024)
	223	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	224	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	225	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	226	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	227	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	228
	229	#ifndef CONFIG_SYS_DCACHE_OFF
	230	#endif
	231
	232	#define CONFIG_SYS_FSL_USDHC_NUM 3
	233
	234	/* Framebuffer */
f6f7e73d	235	#ifdef CONFIG_VIDEO
ff383220	236	#define CONFIG_VIDEO_IPUV3
ff383220 AB	237	#define CONFIG_VIDEO_BMP_RLE8
	238	#define CONFIG_SPLASH_SCREEN
	239	#define CONFIG_SPLASH_SCREEN_ALIGN
	240	#define CONFIG_BMP_16BPP
	241	#define CONFIG_VIDEO_LOGO
	242	#define CONFIG_VIDEO_BMP_LOGO
ff383220 AB	243	#define CONFIG_IMX_HDMI
ff383220 AB	244	#define CONFIG_IMX_VIDEO_SKIP
f6f7e73d	245	#endif
ff383220 AB	246
	247	#define CONFIG_PWM_IMX
	248	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	249
ff383220	250	#ifdef CONFIG_CMD_PCI
ff383220 AB	251	#define CONFIG_PCI_SCAN_SHOW
	252	#define CONFIG_PCIE_IMX
	253	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	254	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	255	#endif
	256
	257	/* I2C Configs */
	258	#define CONFIG_SYS_I2C
	259	#define CONFIG_SYS_I2C_MXC
	260	#define CONFIG_SYS_I2C_SPEED 100000
	261	#define CONFIG_SYS_I2C_MXC_I2C1
	262	#define CONFIG_SYS_I2C_MXC_I2C2
	263	#define CONFIG_SYS_I2C_MXC_I2C3
	264
	265	#endif /* __ADVANTECH_DMSBA16_CONFIG_H */