]>
Commit | Line | Data |
---|---|---|
d8ccbe93 HS |
1 | /* |
2 | * (C) Copyright 2016 | |
3 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. | |
4 | * | |
5 | * Based on: | |
6 | * am335x_evm.h | |
7 | * | |
8 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ | |
9 | * | |
10 | * SPDX-License-Identifier: GPL-2.0+ | |
11 | */ | |
12 | ||
13 | #ifndef __CONFIG_AM335X_SHC_H | |
14 | #define __CONFIG_AM335X_SHC_H | |
15 | ||
16 | #include <configs/ti_am335x_common.h> | |
17 | ||
18 | /* settings we don;t want on this board */ | |
19 | #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC | |
20 | #undef CONFIG_CMD_EXT4 | |
21 | #undef CONFIG_CMD_EXT4_WRITE | |
d8ccbe93 | 22 | #undef CONFIG_CMD_SPI |
d8ccbe93 HS |
23 | |
24 | #define CONFIG_CMD_CACHE | |
25 | ||
26 | #ifndef CONFIG_SPL_BUILD | |
27 | # define CONFIG_TIMESTAMP | |
d8ccbe93 HS |
28 | #endif |
29 | ||
30 | #define CONFIG_SYS_BOOTM_LEN (16 << 20) | |
31 | ||
d8ccbe93 HS |
32 | /* Clock Defines */ |
33 | #define V_OSCK 24000000 /* Clock output from T2 */ | |
34 | #define V_SCLK (V_OSCK) | |
35 | ||
d8ccbe93 HS |
36 | /* |
37 | * in case of SD Card or Network boot we want to have a possibility to | |
38 | * debrick the shc, therefore do not read environment from eMMC | |
39 | */ | |
40 | #if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT) | |
41 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
42 | #else | |
43 | #define CONFIG_SYS_MMC_ENV_DEV 1 | |
44 | #endif | |
45 | ||
46 | /* | |
47 | * Info when using boot partitions: As environment resides within first | |
48 | * 128 kB, MLO must start at 128 kB == 0x20000 | |
49 | * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1, | |
50 | * 4..7=general0..3 | |
51 | */ | |
52 | #define CONFIG_ENV_SIZE 0x1000 /* 4 KB */ | |
53 | #define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */ | |
54 | ||
55 | #define CONFIG_HSMMC2_8BIT | |
56 | ||
57 | #define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */ | |
58 | #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE | |
59 | ||
d8ccbe93 HS |
60 | #ifndef CONFIG_SHC_ICT |
61 | /* | |
62 | * In builds other than ICT, reset to retry after timeout | |
63 | * Define a timeout after which a stopped bootloader continues autoboot | |
64 | * (only works with CONFIG_RESET_TO_RETRY) | |
65 | */ | |
66 | # define CONFIG_BOOT_RETRY_TIME 30 | |
67 | # define CONFIG_RESET_TO_RETRY | |
68 | #endif | |
69 | ||
70 | #define CONFIG_ENV_VARS_UBOOT_CONFIG | |
71 | #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG | |
72 | ||
73 | #ifndef CONFIG_SPL_BUILD | |
74 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
75 | "loadaddr=0x80200000\0" \ | |
76 | "kloadaddr=0x84000000\0" \ | |
77 | "fdtaddr=0x85000000\0" \ | |
78 | "fdt_high=0xffffffff\0" \ | |
79 | "rdaddr=0x81000000\0" \ | |
80 | "bootfile=uImage\0" \ | |
81 | "fdtfile=am335x-shc.dtb\0" \ | |
82 | "verify=no\0" \ | |
83 | "serverip=10.55.152.184\0" \ | |
84 | "rootpath=/srv/nfs/shc-rootfs\0" \ | |
85 | "console=ttyO0,115200n8\0" \ | |
86 | "optargs=quiet\0" \ | |
87 | "mmcdev=1\0" \ | |
88 | "harakiri=0\0" \ | |
89 | "mmcpart=2\0" \ | |
90 | "active_root=root1\0" \ | |
91 | "inactive_root=root2\0" \ | |
92 | "mmcrootfstype=ext4 rootwait\0" \ | |
93 | "nfsopts=nolock\0" \ | |
94 | "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ | |
95 | "::off\0" \ | |
96 | "ip_method=none\0" \ | |
97 | "bootargs_defaults=setenv bootargs " \ | |
98 | "console=${console} " \ | |
99 | "${optargs}\0" \ | |
100 | "mmcargs=run bootargs_defaults;" \ | |
101 | "setenv bootargs ${bootargs} " \ | |
102 | "root=${mmcroot} " \ | |
103 | "rootfstype=${mmcrootfstype} ip=${ip_method}\0" \ | |
104 | "netargs=setenv bootargs console=${console} " \ | |
105 | "${optargs} " \ | |
106 | "root=/dev/nfs " \ | |
107 | "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ | |
108 | "ip=dhcp\0" \ | |
109 | "bootenv=uEnv.txt\0" \ | |
110 | "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \ | |
111 | "echo Loaded environment from ${bootenv}; " \ | |
112 | "run importbootenv; " \ | |
113 | "fi;\0" \ | |
114 | "importbootenv=echo Importing environment variables from uEnv.txt ...; " \ | |
115 | "env import -t $loadaddr $filesize\0" \ | |
116 | "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \ | |
117 | "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \ | |
118 | "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \ | |
119 | "netloaduimage=tftp ${loadaddr} ${bootfile}\0" \ | |
120 | "netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \ | |
121 | "mmcboot=echo Booting Linux from ${mmcdevice} ...; " \ | |
122 | "run mmcargs; " \ | |
123 | "if run loadfdt; then " \ | |
124 | "echo device tree detected; " \ | |
125 | "bootm ${kloadaddr} - ${fdtaddr}; " \ | |
126 | "else " \ | |
127 | "bootm ${kloadaddr}; " \ | |
128 | "fi; \0" \ | |
129 | "netboot=echo Booting from network ...; " \ | |
130 | "setenv autoload no; " \ | |
131 | "dhcp; " \ | |
132 | "run netloaduimage; " \ | |
133 | "run netargs; " \ | |
134 | "echo NFS path: ${serverip}:${rootpath};" \ | |
135 | "if run netloadfdt; then " \ | |
136 | "echo device tree detected; " \ | |
137 | "bootm ${loadaddr} - ${fdtaddr}; " \ | |
138 | "else " \ | |
139 | "bootm ${loadaddr}; " \ | |
140 | "fi; \0" \ | |
141 | "emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \ | |
142 | "mmcpart_gp=mmcpart gp 1 40; \0" \ | |
143 | "mmcpart_enhance=mmcpart enhance 0 64; \0" \ | |
144 | "mmcpart_rel_write=mmcpart rel_write 1f; \0" \ | |
145 | "mmcpart_commit=mmcpart commit 1; \0" \ | |
146 | "mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \ | |
147 | "led_success=gpio set 22; \0" \ | |
148 | "fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \ | |
149 | "uenv_exec=if test -n $uenvcmd; then " \ | |
150 | "echo Running uenvcmd ...; " \ | |
151 | "run uenvcmd; " \ | |
152 | "fi;\0" \ | |
153 | "sd_setup=echo SD/MMC-Card detected on device 0; " \ | |
154 | "setenv mmcdevice SD; " \ | |
155 | "setenv mmcdev 0; " \ | |
156 | "setenv mmcpart 2; " \ | |
157 | "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \ | |
158 | "emmc_setup=echo eMMC detected on device 1; " \ | |
159 | "setenv mmcdevice eMMC; " \ | |
160 | "setenv mmcdev 1; " \ | |
161 | "run emmc_erase; " \ | |
162 | "if test ${active_root} = root2; then " \ | |
163 | "echo Active root is partition 6 (root2); " \ | |
164 | "setenv mmcpart 6; " \ | |
165 | "else " \ | |
166 | "echo Active root is partition 5 (root1); " \ | |
167 | "setenv mmcpart 5; " \ | |
168 | "fi; " \ | |
169 | "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" | |
170 | #endif /* #ifndef CONFIG_SPL_BUILD */ | |
171 | ||
172 | #if defined CONFIG_SHC_NETBOOT | |
173 | /* Network Boot */ | |
174 | # define CONFIG_BOOTCOMMAND \ | |
175 | "run fusecmd; " \ | |
176 | "if run netboot; then " \ | |
177 | "echo Booting from network; " \ | |
178 | "else " \ | |
179 | "echo ERROR: Cannot boot from network!; " \ | |
180 | "panic; " \ | |
181 | "fi; " | |
182 | ||
183 | #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */ | |
184 | /* SD-Card Boot */ | |
185 | # define CONFIG_BOOTCOMMAND \ | |
186 | "if mmc dev 0; mmc rescan; then " \ | |
187 | "run sd_setup; " \ | |
188 | "else " \ | |
189 | "echo ERROR: SD/MMC-Card not detected!; " \ | |
190 | "panic; " \ | |
191 | "fi; " \ | |
192 | "if run loaduimage; then " \ | |
193 | "echo Bootable SD/MMC-Card inserted, booting from it!; " \ | |
194 | "run mmcboot; " \ | |
195 | "else " \ | |
196 | "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \ | |
197 | "panic; " \ | |
198 | "fi; " | |
199 | ||
200 | #elif defined CONFIG_SHC_ICT | |
201 | /* ICT adapter boots only u-boot and does HW partitioning */ | |
202 | # define CONFIG_BOOTCOMMAND \ | |
203 | "if mmc dev 0; mmc rescan; then " \ | |
204 | "run sd_setup; " \ | |
205 | "else " \ | |
206 | "echo ERROR: SD/MMC-Card not detected!; " \ | |
207 | "panic; " \ | |
208 | "fi; " \ | |
209 | "run fusecmd; " | |
210 | ||
211 | #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */ | |
212 | /* Regular Boot from internal eMMC */ | |
213 | # define CONFIG_BOOTCOMMAND \ | |
214 | "if mmc dev 1; mmc rescan; then " \ | |
215 | "run emmc_setup; " \ | |
216 | "else " \ | |
217 | "echo ERROR: eMMC device not detected!; " \ | |
218 | "panic; " \ | |
219 | "fi; " \ | |
220 | "if run loaduimage; then " \ | |
221 | "run mmcboot; " \ | |
222 | "else " \ | |
223 | "echo ERROR Unable to load uImage from eMMC!; " \ | |
224 | "echo Performing Rollback!; " \ | |
225 | "setenv _active_ ${active_root}; " \ | |
226 | "setenv _inactive_ ${inactive_root}; " \ | |
227 | "setenv active_root ${_inactive_}; " \ | |
228 | "setenv inactive_root ${_active_}; " \ | |
229 | "saveenv; " \ | |
230 | "reset; " \ | |
231 | "fi; " | |
232 | ||
233 | #endif /* Regular Boot */ | |
234 | ||
235 | /* NS16550 Configuration */ | |
236 | #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ | |
237 | #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ | |
238 | #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ | |
239 | #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ | |
240 | #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ | |
241 | #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ | |
d8ccbe93 HS |
242 | #define CONFIG_CONS_INDEX 1 |
243 | ||
244 | /* PMIC support */ | |
245 | #define CONFIG_POWER_TPS65217 | |
246 | ||
247 | /* SPL */ | |
d8ccbe93 | 248 | |
d8ccbe93 HS |
249 | /* |
250 | * Disable MMC DM for SPL build and can be re-enabled after adding | |
251 | * DM support in SPL | |
252 | */ | |
253 | #ifdef CONFIG_SPL_BUILD | |
254 | #undef CONFIG_DM_MMC | |
255 | #undef CONFIG_TIMER | |
256 | #endif | |
257 | ||
258 | #define CONFIG_CMD_DHCP | |
259 | #define CONFIG_CMD_PING | |
260 | #define CONFIG_DRIVER_TI_CPSW | |
261 | #define CONFIG_MII | |
262 | #define CONFIG_BOOTP_DEFAULT | |
263 | #define CONFIG_BOOTP_DNS | |
264 | #define CONFIG_BOOTP_DNS2 | |
265 | #define CONFIG_BOOTP_SEND_HOSTNAME | |
266 | #define CONFIG_BOOTP_GATEWAY | |
267 | #define CONFIG_BOOTP_SUBNETMASK | |
268 | #define CONFIG_NET_RETRY_COUNT 10 | |
d8ccbe93 HS |
269 | #define CONFIG_PHY_ADDR 0 |
270 | #define CONFIG_PHY_SMSC | |
271 | ||
272 | /* I2C configuration */ | |
273 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ | |
274 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 | |
275 | #define CONFIG_SYS_I2C_SPEED 400000 | |
276 | #define CONFIG_SYS_I2C_SLAVE 1 | |
277 | ||
278 | #define CONFIG_SHOW_BOOT_PROGRESS | |
d8ccbe93 | 279 | #endif /* ! __CONFIG_AM335X_SHC_H */ |