[people/ms/u-boot.git] / include / configs / am57xx_evm.h

/*
 * (C) Copyright 2014
 * Texas Instruments Incorporated.
 * Felipe Balbi <balbi@ti.com>
 *
 * Configuration settings for the TI Beagle x15 board.
 * See ti_omap5_common.h for omap5 common settings.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_AM57XX_EVM_H
#define __CONFIG_AM57XX_EVM_H

#define CONFIG_AM57XX

#ifdef CONFIG_SPL_BUILD
#define CONFIG_IODELAY_RECALIBRATION
#endif

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_NR_DRAM_BANKS		2

#define CONFIG_ENV_SIZE			(64 << 10)
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE		"mmc"
#define FAT_ENV_DEVICE_AND_PART		"0:1"
#define FAT_ENV_FILE			"uboot.env"

#define CONSOLEDEV			"ttyO2"
#define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_OMAP_ABE_SYSCK

/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
	"uuid_disk=${uuid_gpt_disk};" \
	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"

#include <configs/ti_omap5_common.h>

/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION

/* CPSW Ethernet */
#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT		10
#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
#define CONFIG_MII			/* Required in net/eth.c */
#define CONFIG_PHY_GIGE			/* per-board part of CPSW */
#define CONFIG_PHYLIB
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */

#define CONFIG_SUPPORT_EMMC_BOOT

/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2

#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST

/* SATA */
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
						CONFIG_SYS_SCSI_MAX_LUN)

/* EEPROM */
#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
#define CONFIG_EEPROM_BUS_ADDRESS 0

/*
 * Default to using SPI for environment, etc.
 * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
 * 0x9E0000 - 0x2000000 : USERLAND
 */
#define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
#define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
#define CONFIG_SYS_SPI_ARGS_SIZE        0x80000

#ifdef CONFIG_SPL_BUILD
#undef CONFIG_DM_SPI
#undef CONFIG_DM_SPI_FLASH
#undef CONFIG_SPL_MAX_SIZE
#define CONFIG_SPL_MAX_SIZE             (256 << 10) /* 256 KiB */
#endif

/* SPI SPL */
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_DMA_SUPPORT
#define CONFIG_TI_EDMA3
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000

/* SPI */
#undef	CONFIG_OMAP3_SPI
#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED                76800000
#define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
#define CONFIG_QSPI_QUAD_SUPPORT

#endif /* __CONFIG_AM57XX_EVM_H */
Commit	Line	Data
1e4ad74b FB	1	/*
	2	* (C) Copyright 2014
	3	* Texas Instruments Incorporated.
	4	* Felipe Balbi <balbi@ti.com>
	5	*
	6	* Configuration settings for the TI Beagle x15 board.
	7	* See ti_omap5_common.h for omap5 common settings.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
74cc8b09 KS	12	#ifndef __CONFIG_AM57XX_EVM_H
74cc8b09 KS	13	#define __CONFIG_AM57XX_EVM_H
1e4ad74b FB	14
	15	#define CONFIG_AM57XX
	16
f91e0c4c LV	17	#ifdef CONFIG_SPL_BUILD
	18	#define CONFIG_IODELAY_RECALIBRATION
	19	#endif
	20
334bbb38 LV	21	#define CONFIG_BOARD_EARLY_INIT_F
334bbb38 LV	22
1e4ad74b FB	23	#define CONFIG_NR_DRAM_BANKS 2
	24
	25	#define CONFIG_ENV_SIZE (64 << 10)
	26	#define CONFIG_ENV_IS_IN_FAT
	27	#define FAT_ENV_INTERFACE "mmc"
	28	#define FAT_ENV_DEVICE_AND_PART "0:1"
	29	#define FAT_ENV_FILE "uboot.env"
	30
1e4ad74b FB	31	#define CONSOLEDEV "ttyO2"
	32	#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
	33	#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
	34	#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
	35	#define CONFIG_BAUDRATE 115200
	36
	37	#define CONFIG_SYS_OMAP_ABE_SYSCK
	38
	39	/* Define the default GPT table for eMMC */
	40	#define PARTS_DEFAULT \
	41	"uuid_disk=${uuid_gpt_disk};" \
	42	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
	43
	44	#include <configs/ti_omap5_common.h>
	45
	46	/* Enhance our eMMC support / experience. */
	47	#define CONFIG_CMD_GPT
	48	#define CONFIG_EFI_PARTITION
1e4ad74b FB	49
1e4ad74b FB	50	/* CPSW Ethernet */
1e4ad74b FB	51	#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
	52	#define CONFIG_BOOTP_DNS2
	53	#define CONFIG_BOOTP_SEND_HOSTNAME
	54	#define CONFIG_BOOTP_GATEWAY
	55	#define CONFIG_BOOTP_SUBNETMASK
	56	#define CONFIG_NET_RETRY_COUNT 10
1e4ad74b FB	57	#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
	58	#define CONFIG_MII /* Required in net/eth.c */
	59	#define CONFIG_PHY_GIGE /* per-board part of CPSW */
	60	#define CONFIG_PHYLIB
e736570c	61	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
1e4ad74b FB	62
	63	#define CONFIG_SUPPORT_EMMC_BOOT
	64
	65	/* USB xHCI HOST */
1e4ad74b FB	66	#define CONFIG_USB_XHCI_OMAP
	67	#define CONFIG_USB_STORAGE
	68	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	69
	70	#define CONFIG_OMAP_USB_PHY
	71	#define CONFIG_OMAP_USB3PHY1_HOST
	72
	73	/* SATA */
	74	#define CONFIG_BOARD_LATE_INIT
c649e3c9	75	#define CONFIG_SCSI
1e4ad74b FB	76	#define CONFIG_LIBATA
	77	#define CONFIG_SCSI_AHCI
	78	#define CONFIG_SCSI_AHCI_PLAT
	79	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	80	#define CONFIG_SYS_SCSI_MAX_LUN 1
	81	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	82	CONFIG_SYS_SCSI_MAX_LUN)
	83
212f96f6 KS	84	/* EEPROM */
	85	#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
	86	#define CONFIG_EEPROM_BUS_ADDRESS 0
	87
08887ed4 V	88	/*
	89	* Default to using SPI for environment, etc.
	90	* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
	91	* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
	92	* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
	93	* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
	94	* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
	95	* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
	96	* 0x9E0000 - 0x2000000 : USERLAND
	97	*/
	98	#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
	99	#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
	100	#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
	101
	102	#ifdef CONFIG_SPL_BUILD
	103	#undef CONFIG_DM_SPI
	104	#undef CONFIG_DM_SPI_FLASH
	105	#undef CONFIG_SPL_MAX_SIZE
	106	#define CONFIG_SPL_MAX_SIZE (256 << 10) /* 256 KiB */
	107	#endif
	108
	109	/* SPI SPL */
	110	#define CONFIG_SPL_SPI_SUPPORT
	111	#define CONFIG_SPL_DMA_SUPPORT
	112	#define CONFIG_TI_EDMA3
	113	#define CONFIG_SPL_SPI_LOAD
	114	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	115	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
	116
	117	/* SPI */
	118	#undef CONFIG_OMAP3_SPI
	119	#define CONFIG_TI_SPI_MMAP
	120	#define CONFIG_SF_DEFAULT_SPEED 76800000
	121	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	122	#define CONFIG_QSPI_QUAD_SUPPORT
	123
74cc8b09	124	#endif /* __CONFIG_AM57XX_EVM_H */