[people/ms/u-boot.git] / include / configs / amcc-common.h

/*
 * (C) Copyright 2008, 2009
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * Common configuration options for all AMCC boards
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __AMCC_COMMON_H
#define __AMCC_COMMON_H

#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* Start of U-Boot	*/
#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/

/*
 * UART
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
#define CONFIG_BAUDRATE		115200
#define CONFIG_SYS_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/*
 * I2C
 */
#define CONFIG_HARD_I2C			/* I2C with hardware support	*/
#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
#define CONFIG_SYS_I2C_SLAVE		0x7F

/*
 * Ethernet/EMAC/PHY
 */
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII			/* MII PHY management		*/
#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
#if defined(CONFIG_440)
#define CONFIG_SYS_RX_ETH_BUFFER	32	/* number of eth rx buffers	*/
#else
#define CONFIG_SYS_RX_ETH_BUFFER	16	/* number of eth rx buffers	*/
#endif

/*
 * Commands
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#if defined(CONFIG_440)
#define CONFIG_CMD_CACHE
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SETEXPR

/*
 * Miscellaneous configurable options
 */
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
#define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
#define CONFIG_LOOPW			/* enable loopw command         */
#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 	/* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/

#define CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser		*/

#define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change	*/

#define CONFIG_REGEX			/* Enable regular expression support */
/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the 40x Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(16 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTM_LEN		(16 << 20) /* Increase max gunzip size */

/*
 * Internal Definitions
 */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
#endif

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
/* Update size in "reg" property of NOR FLASH device tree nodes */
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE

/*
 * Booting and default environment
 */
#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"
#define CONFIG_BOOTCOMMAND	"run flash_self"

/*
 * Only very few boards have default console not on ttyS0 (like Taishan)
 */
#if !defined(CONFIG_USE_TTY)
#define CONFIG_USE_TTY	ttyS0
#endif

/*
 * Only very few boards have default netdev not set to eth0 (like Arches)
 */
#if !defined(CONFIG_USE_NETDEV)
#define CONFIG_USE_NETDEV	eth0
#endif

/*
 * Only some 4xx PPC's are equipped with an FPU
 */
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
    defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define CONFIG_AMCC_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_AMCC_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xx\0"
#endif

/*
 * Only some boards need to extend the bootargs by some additional
 * parameters (like Makalu)
 */
#if !defined(CONFIG_ADDMISC)
#define CONFIG_ADDMISC	"addmisc=setenv bootargs ${bootargs}\0"
#endif

/*
 * General common environment variables shared on all AMCC eval boards
 */
#define CONFIG_AMCC_DEF_ENV						\
	"netdev=" __stringify(CONFIG_USE_NETDEV) "\0"				\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0"	\
	CONFIG_ADDMISC							\
	"initrd_high=30000000\0"					\
	"kernel_addr_r=1000000\0"					\
	"fdt_addr_r=1800000\0"						\
	"ramdisk_addr_r=1900000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"				\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"			\
	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"		\
	CONFIG_AMCC_DEF_ENV_ROOTPATH

/*
 * Default environment for arch/powerpc booting
 * for boards that are ported to arch/powerpc
 */
#define CONFIG_AMCC_DEF_ENV_POWERPC					\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"tftp ${fdt_addr_r} ${fdt_file}; "			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${fdt_addr_r} ${fdt_file};"			\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"net_self=run net_self_load;"					\
		"run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
	"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"

/*
 * Default environment for arch/ppc booting,
 * for boards that are not ported to arch/powerpc yet
 */
#define CONFIG_AMCC_DEF_ENV_PPC						\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r}\0"

/*
 * Default environment for arch/ppc booting (old version),
 * for boards that are ported to arch/ppc and arch/powerpc
 */
#define CONFIG_AMCC_DEF_ENV_PPC_OLD					\
	"flash_self_old=run ramargs addip addtty addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs_old=run nfsargs addip addtty addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r}\0"

#define CONFIG_AMCC_DEF_ENV_NOR_UPD					\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
	"load=tftp 200000 ${u-boot}\0"					\
	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
		"era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
		"cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
	"upd=run load update\0"						\

#define CONFIG_AMCC_DEF_ENV_NAND_UPD					\
	"u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
	"nload=tftp 200000 ${u-boot-nand}\0"				\
	"nupdate=nand erase 0 100000;nand write 200000 0 100000\0"	\
	"nupd=run nload nupdate\0"

#endif /* __AMCC_COMMON_H */
Commit	Line	Data
a8a11a9e	1	/*
c8355b9d	2	* (C) Copyright 2008, 2009
a8a11a9e SR	3	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	4	*
	5	* Common configuration options for all AMCC boards
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of
	10	* the License, or (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	20	* MA 02111-1307 USA
	21	*/
	22
	23	#ifndef __AMCC_COMMON_H
	24	#define __AMCC_COMMON_H
	25
6d0f6bcf	26	#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
14d0a02a	27	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
6d0f6bcf JCPV	28	#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
6d0f6bcf JCPV	29	#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
a8a11a9e SR	30
	31	/*
	32	* UART
	33	*/
550650dd SR	34	#define CONFIG_SYS_NS16550
	35	#define CONFIG_SYS_NS16550_SERIAL
	36	#define CONFIG_SYS_NS16550_REG_SIZE 1
	37	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
	38	#define CONFIG_BAUDRATE 115200
6d0f6bcf	39	#define CONFIG_SYS_BAUDRATE_TABLE \
a8a11a9e SR	40	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
	41
	42	/*
	43	* I2C
	44	*/
	45	#define CONFIG_HARD_I2C /* I2C with hardware support */
d0b0dcaa	46	#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
6d0f6bcf	47	#define CONFIG_SYS_I2C_SLAVE 0x7F
a8a11a9e SR	48
	49	/*
	50	* Ethernet/EMAC/PHY
	51	*/
96e21f86	52	#define CONFIG_PPC4xx_EMAC
a8a11a9e	53	#define CONFIG_MII /* MII PHY management */
a8a11a9e SR	54	#define CONFIG_NETCONSOLE /* include NetConsole support */
a8a11a9e SR	55	#if defined(CONFIG_440)
6d0f6bcf	56	#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */
a8a11a9e	57	#else
6d0f6bcf	58	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */
a8a11a9e SR	59	#endif
	60
	61	/*
	62	* Commands
	63	*/
	64	#include <config_cmd_default.h>
	65
	66	#define CONFIG_CMD_ASKENV
	67	#if defined(CONFIG_440)
	68	#define CONFIG_CMD_CACHE
	69	#endif
	70	#define CONFIG_CMD_DHCP
	71	#define CONFIG_CMD_DIAG
	72	#define CONFIG_CMD_EEPROM
	73	#define CONFIG_CMD_ELF
3f9315c0	74	#define CONFIG_CMD_GREPENV
a8a11a9e SR	75	#define CONFIG_CMD_I2C
	76	#define CONFIG_CMD_IRQ
	77	#define CONFIG_CMD_MII
	78	#define CONFIG_CMD_NET
	79	#define CONFIG_CMD_NFS
	80	#define CONFIG_CMD_PING
	81	#define CONFIG_CMD_REGINFO
3f9315c0	82	#define CONFIG_CMD_SETEXPR
a8a11a9e SR	83
	84	/*
	85	* Miscellaneous configurable options
	86	*/
	87	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
6d0f6bcf JCPV	88	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	89	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
a8a11a9e	90	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	91	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
a8a11a9e	92	#else
6d0f6bcf	93	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
a8a11a9e	94	#endif
6d0f6bcf JCPV	95	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	96	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	97	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
a8a11a9e	98
6d0f6bcf JCPV	99	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	100	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
a8a11a9e	101
6d0f6bcf JCPV	102	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	103	#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */
a8a11a9e	104
6d0f6bcf	105	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
a8a11a9e SR	106
	107	#define CONFIG_CMDLINE_EDITING /* add command line history */
	108	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	109	#define CONFIG_LOOPW /* enable loopw command */
	110	#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
	111	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	112	#define CONFIG_VERSION_VARIABLE /* include version env variable */
c88840af	113	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
a8a11a9e	114
c88840af	115	#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
a8a11a9e SR	116
a8a11a9e SR	117	#define CONFIG_LOADS_ECHO /* echo on for serial download */
c88840af	118	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
a8a11a9e	119
3f9315c0	120	#define CONFIG_REGEX /* Enable regular expression support */
a8a11a9e SR	121	/*
	122	* BOOTP options
	123	*/
	124	#define CONFIG_BOOTP_BOOTFILESIZE
	125	#define CONFIG_BOOTP_BOOTPATH
	126	#define CONFIG_BOOTP_GATEWAY
	127	#define CONFIG_BOOTP_HOSTNAME
	128	#define CONFIG_BOOTP_SUBNETMASK
	129
	130	/*
	131	* For booting Linux, the board info and command line data
6942efc2 SR	132	* have to be in the first 16 MB of memory, since this is
6942efc2 SR	133	* the maximum mapped by the 40x Linux kernel during initialization.
a8a11a9e	134	*/
6942efc2 SR	135	#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
6942efc2 SR	136	#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
a8a11a9e SR	137
	138	/*
	139	* Internal Definitions
	140	*/
	141	#if defined(CONFIG_CMD_KGDB)
	142	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
	143	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	144	#endif
	145
	146	/*
	147	* Pass open firmware flat tree
	148	*/
	149	#define CONFIG_OF_LIBFDT
	150	#define CONFIG_OF_BOARD_SETUP
92b8964b SR	151	/* Update size in "reg" property of NOR FLASH device tree nodes */
92b8964b SR	152	#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
a8a11a9e SR	153
	154	/*
	155	* Booting and default environment
	156	*/
	157	#define CONFIG_PREBOOT "echo;" \
	158	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	159	"echo"
	160	#define CONFIG_BOOTCOMMAND "run flash_self"
	161
	162	/*
	163	* Only very few boards have default console not on ttyS0 (like Taishan)
	164	*/
	165	#if !defined(CONFIG_USE_TTY)
	166	#define CONFIG_USE_TTY ttyS0
	167	#endif
	168
f09f09d3 AG	169	/*
	170	* Only very few boards have default netdev not set to eth0 (like Arches)
	171	*/
	172	#if !defined(CONFIG_USE_NETDEV)
	173	#define CONFIG_USE_NETDEV eth0
	174	#endif
	175
a8a11a9e SR	176	/*
	177	* Only some 4xx PPC's are equipped with an FPU
	178	*/
	179	#if defined(CONFIG_440EP) \|\| defined(CONFIG_440EPX) \|\| \
	180	defined(CONFIG_460EX) \|\| defined(CONFIG_460GT)
	181	#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
	182	#else
	183	#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
	184	#endif
	185
	186	/*
	187	* Only some boards need to extend the bootargs by some additional
	188	* parameters (like Makalu)
	189	*/
	190	#if !defined(CONFIG_ADDMISC)
	191	#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
	192	#endif
	193
a8a11a9e SR	194	/*
	195	* General common environment variables shared on all AMCC eval boards
	196	*/
	197	#define CONFIG_AMCC_DEF_ENV \
93ea89f0	198	"netdev=" __stringify(CONFIG_USE_NETDEV) "\0" \
a8a11a9e SR	199	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	200	"nfsroot=${serverip}:${rootpath}\0" \
	201	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	202	"addip=setenv bootargs ${bootargs} " \
	203	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	204	":${hostname}:${netdev}:off panic=1\0" \
	205	"addtty=setenv bootargs ${bootargs}" \
93ea89f0	206	" console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0" \
a8a11a9e SR	207	CONFIG_ADDMISC \
a8a11a9e SR	208	"initrd_high=30000000\0" \
27dd5f8e SR	209	"kernel_addr_r=1000000\0" \
	210	"fdt_addr_r=1800000\0" \
	211	"ramdisk_addr_r=1900000\0" \
93ea89f0 MV	212	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
	213	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	214	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
a8a11a9e SR	215	CONFIG_AMCC_DEF_ENV_ROOTPATH
	216
	217	/*
	218	* Default environment for arch/powerpc booting
	219	* for boards that are ported to arch/powerpc
	220	*/
	221	#define CONFIG_AMCC_DEF_ENV_POWERPC \
	222	"flash_self=run ramargs addip addtty addmisc;" \
	223	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
	224	"flash_nfs=run nfsargs addip addtty addmisc;" \
	225	"bootm ${kernel_addr} - ${fdt_addr}\0" \
	226	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	227	"tftp ${fdt_addr_r} ${fdt_file}; " \
	228	"run nfsargs addip addtty addmisc;" \
	229	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
f09f09d3 AG	230	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
	231	"tftp ${fdt_addr_r} ${fdt_file};" \
	232	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
	233	"net_self=run net_self_load;" \
	234	"run ramargs addip addtty addmisc;" \
	235	"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
93ea89f0	236	"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"
a8a11a9e SR	237
	238	/*
	239	* Default environment for arch/ppc booting,
	240	* for boards that are not ported to arch/powerpc yet
	241	*/
	242	#define CONFIG_AMCC_DEF_ENV_PPC \
	243	"flash_self=run ramargs addip addtty addmisc;" \
	244	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	245	"flash_nfs=run nfsargs addip addtty addmisc;" \
	246	"bootm ${kernel_addr}\0" \
	247	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	248	"run nfsargs addip addtty addmisc;" \
	249	"bootm ${kernel_addr_r}\0"
	250
	251	/*
	252	* Default environment for arch/ppc booting (old version),
	253	* for boards that are ported to arch/ppc and arch/powerpc
	254	*/
	255	#define CONFIG_AMCC_DEF_ENV_PPC_OLD \
	256	"flash_self_old=run ramargs addip addtty addmisc;" \
	257	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	258	"flash_nfs_old=run nfsargs addip addtty addmisc;" \
	259	"bootm ${kernel_addr}\0" \
	260	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
	261	"run nfsargs addip addtty addmisc;" \
	262	"bootm ${kernel_addr_r}\0"
	263
	264	#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
93ea89f0	265	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
c8355b9d	266	"load=tftp 200000 ${u-boot}\0" \
93ea89f0 MV	267	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
	268	"era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
	269	"cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
a8a11a9e SR	270	"upd=run load update\0" \
	271
	272	#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
93ea89f0	273	"u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
c8355b9d	274	"nload=tftp 200000 ${u-boot-nand}\0" \
acfbbb90	275	"nupdate=nand erase 0 100000;nand write 200000 0 100000\0" \
a8a11a9e SR	276	"nupd=run nload nupdate\0"
	277
	278	#endif /* __AMCC_COMMON_H */