[people/ms/u-boot.git] / include / configs / amcc-common.h

/*
 * (C) Copyright 2008, 2009
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * Common configuration options for all AMCC boards
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __AMCC_COMMON_H
#define __AMCC_COMMON_H

#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* Start of U-Boot	*/
#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/

/*
 * UART
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
#define CONFIG_BAUDRATE		115200
#define CONFIG_SYS_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_PPC4XX
#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F

/*
 * Ethernet/EMAC/PHY
 */
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII			/* MII PHY management		*/
#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
#if defined(CONFIG_440)
#define CONFIG_SYS_RX_ETH_BUFFER	32	/* number of eth rx buffers	*/
#else
#define CONFIG_SYS_RX_ETH_BUFFER	16	/* number of eth rx buffers	*/
#endif

/*
 * Commands
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#if defined(CONFIG_440)
#define CONFIG_CMD_CACHE
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SETEXPR

/*
 * Miscellaneous configurable options
 */
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
#define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
#define CONFIG_LOOPW			/* enable loopw command         */
#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 	/* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/

#define CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser		*/

#define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change	*/

#define CONFIG_REGEX			/* Enable regular expression support */
/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the 40x Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(16 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTM_LEN		(16 << 20) /* Increase max gunzip size */

/*
 * Internal Definitions
 */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
#endif

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
/* Update size in "reg" property of NOR FLASH device tree nodes */
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE

/*
 * Booting and default environment
 */
#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"
#define CONFIG_BOOTCOMMAND	"run flash_self"

/*
 * Only very few boards have default console not on ttyS0 (like Taishan)
 */
#if !defined(CONFIG_USE_TTY)
#define CONFIG_USE_TTY	ttyS0
#endif

/*
 * Only very few boards have default netdev not set to eth0 (like Arches)
 */
#if !defined(CONFIG_USE_NETDEV)
#define CONFIG_USE_NETDEV	eth0
#endif

/*
 * Only some 4xx PPC's are equipped with an FPU
 */
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
    defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define CONFIG_AMCC_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_AMCC_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xx\0"
#endif

/*
 * Only some boards need to extend the bootargs by some additional
 * parameters (like Makalu)
 */
#if !defined(CONFIG_ADDMISC)
#define CONFIG_ADDMISC	"addmisc=setenv bootargs ${bootargs}\0"
#endif

/*
 * General common environment variables shared on all AMCC eval boards
 */
#define CONFIG_AMCC_DEF_ENV						\
	"netdev=" __stringify(CONFIG_USE_NETDEV) "\0"				\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0"	\
	CONFIG_ADDMISC							\
	"initrd_high=30000000\0"					\
	"kernel_addr_r=1000000\0"					\
	"fdt_addr_r=1800000\0"						\
	"ramdisk_addr_r=1900000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"				\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"			\
	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"		\
	CONFIG_AMCC_DEF_ENV_ROOTPATH

/*
 * Default environment for arch/powerpc booting
 * for boards that are ported to arch/powerpc
 */
#define CONFIG_AMCC_DEF_ENV_POWERPC					\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"tftp ${fdt_addr_r} ${fdt_file}; "			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${fdt_addr_r} ${fdt_file};"			\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"net_self=run net_self_load;"					\
		"run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
	"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"

/*
 * Default environment for arch/ppc booting,
 * for boards that are not ported to arch/powerpc yet
 */
#define CONFIG_AMCC_DEF_ENV_PPC						\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r}\0"

/*
 * Default environment for arch/ppc booting (old version),
 * for boards that are ported to arch/ppc and arch/powerpc
 */
#define CONFIG_AMCC_DEF_ENV_PPC_OLD					\
	"flash_self_old=run ramargs addip addtty addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs_old=run nfsargs addip addtty addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r}\0"

#define CONFIG_AMCC_DEF_ENV_NOR_UPD					\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
	"load=tftp 200000 ${u-boot}\0"					\
	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
		"era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
		"cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
	"upd=run load update\0"						\

#define CONFIG_AMCC_DEF_ENV_NAND_UPD					\
	"u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
	"nload=tftp 200000 ${u-boot-nand}\0"				\
	"nupdate=nand erase 0 100000;nand write 200000 0 100000\0"	\
	"nupd=run nload nupdate\0"

#endif /* __AMCC_COMMON_H */
Commit	Line	Data
a8a11a9e	1	/*
c8355b9d	2	* (C) Copyright 2008, 2009
a8a11a9e SR	3	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	4	*
	5	* Common configuration options for all AMCC boards
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of
	10	* the License, or (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	20	* MA 02111-1307 USA
	21	*/
	22
	23	#ifndef __AMCC_COMMON_H
	24	#define __AMCC_COMMON_H
	25
6d0f6bcf	26	#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
14d0a02a	27	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
6d0f6bcf JCPV	28	#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
6d0f6bcf JCPV	29	#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
a8a11a9e SR	30
	31	/*
	32	* UART
	33	*/
550650dd SR	34	#define CONFIG_SYS_NS16550
	35	#define CONFIG_SYS_NS16550_SERIAL
	36	#define CONFIG_SYS_NS16550_REG_SIZE 1
	37	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
	38	#define CONFIG_BAUDRATE 115200
6d0f6bcf	39	#define CONFIG_SYS_BAUDRATE_TABLE \
a8a11a9e SR	40	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
	41
	42	/*
	43	* I2C
	44	*/
880540de DE	45	#define CONFIG_SYS_I2C
	46	#define CONFIG_SYS_I2C_PPC4XX
	47	#define CONFIG_SYS_I2C_PPC4XX_CH0
	48	#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
a8a11a9e SR	49
	50	/*
	51	* Ethernet/EMAC/PHY
	52	*/
96e21f86	53	#define CONFIG_PPC4xx_EMAC
a8a11a9e	54	#define CONFIG_MII /* MII PHY management */
a8a11a9e SR	55	#define CONFIG_NETCONSOLE /* include NetConsole support */
a8a11a9e SR	56	#if defined(CONFIG_440)
6d0f6bcf	57	#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */
a8a11a9e	58	#else
6d0f6bcf	59	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */
a8a11a9e SR	60	#endif
	61
	62	/*
	63	* Commands
	64	*/
	65	#include <config_cmd_default.h>
	66
	67	#define CONFIG_CMD_ASKENV
	68	#if defined(CONFIG_440)
	69	#define CONFIG_CMD_CACHE
	70	#endif
	71	#define CONFIG_CMD_DHCP
	72	#define CONFIG_CMD_DIAG
	73	#define CONFIG_CMD_EEPROM
	74	#define CONFIG_CMD_ELF
3f9315c0	75	#define CONFIG_CMD_GREPENV
a8a11a9e SR	76	#define CONFIG_CMD_I2C
	77	#define CONFIG_CMD_IRQ
	78	#define CONFIG_CMD_MII
	79	#define CONFIG_CMD_NET
	80	#define CONFIG_CMD_NFS
	81	#define CONFIG_CMD_PING
	82	#define CONFIG_CMD_REGINFO
3f9315c0	83	#define CONFIG_CMD_SETEXPR
a8a11a9e SR	84
	85	/*
	86	* Miscellaneous configurable options
	87	*/
	88	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
6d0f6bcf JCPV	89	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	90	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
a8a11a9e	91	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	92	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
a8a11a9e	93	#else
6d0f6bcf	94	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
a8a11a9e	95	#endif
6d0f6bcf JCPV	96	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	97	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	98	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
a8a11a9e	99
6d0f6bcf JCPV	100	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	101	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
a8a11a9e	102
6d0f6bcf JCPV	103	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	104	#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */
a8a11a9e	105
6d0f6bcf	106	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
a8a11a9e SR	107
	108	#define CONFIG_CMDLINE_EDITING /* add command line history */
	109	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	110	#define CONFIG_LOOPW /* enable loopw command */
	111	#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
	112	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	113	#define CONFIG_VERSION_VARIABLE /* include version env variable */
c88840af	114	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
a8a11a9e	115
c88840af	116	#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
a8a11a9e SR	117
a8a11a9e SR	118	#define CONFIG_LOADS_ECHO /* echo on for serial download */
c88840af	119	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
a8a11a9e	120
3f9315c0	121	#define CONFIG_REGEX /* Enable regular expression support */
a8a11a9e SR	122	/*
	123	* BOOTP options
	124	*/
	125	#define CONFIG_BOOTP_BOOTFILESIZE
	126	#define CONFIG_BOOTP_BOOTPATH
	127	#define CONFIG_BOOTP_GATEWAY
	128	#define CONFIG_BOOTP_HOSTNAME
	129	#define CONFIG_BOOTP_SUBNETMASK
	130
	131	/*
	132	* For booting Linux, the board info and command line data
6942efc2 SR	133	* have to be in the first 16 MB of memory, since this is
6942efc2 SR	134	* the maximum mapped by the 40x Linux kernel during initialization.
a8a11a9e	135	*/
6942efc2 SR	136	#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
6942efc2 SR	137	#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
a8a11a9e SR	138
	139	/*
	140	* Internal Definitions
	141	*/
	142	#if defined(CONFIG_CMD_KGDB)
	143	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
	144	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	145	#endif
	146
	147	/*
	148	* Pass open firmware flat tree
	149	*/
	150	#define CONFIG_OF_LIBFDT
	151	#define CONFIG_OF_BOARD_SETUP
92b8964b SR	152	/* Update size in "reg" property of NOR FLASH device tree nodes */
92b8964b SR	153	#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
a8a11a9e SR	154
	155	/*
	156	* Booting and default environment
	157	*/
	158	#define CONFIG_PREBOOT "echo;" \
	159	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	160	"echo"
	161	#define CONFIG_BOOTCOMMAND "run flash_self"
	162
	163	/*
	164	* Only very few boards have default console not on ttyS0 (like Taishan)
	165	*/
	166	#if !defined(CONFIG_USE_TTY)
	167	#define CONFIG_USE_TTY ttyS0
	168	#endif
	169
f09f09d3 AG	170	/*
	171	* Only very few boards have default netdev not set to eth0 (like Arches)
	172	*/
	173	#if !defined(CONFIG_USE_NETDEV)
	174	#define CONFIG_USE_NETDEV eth0
	175	#endif
	176
a8a11a9e SR	177	/*
	178	* Only some 4xx PPC's are equipped with an FPU
	179	*/
	180	#if defined(CONFIG_440EP) \|\| defined(CONFIG_440EPX) \|\| \
	181	defined(CONFIG_460EX) \|\| defined(CONFIG_460GT)
	182	#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
	183	#else
	184	#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
	185	#endif
	186
	187	/*
	188	* Only some boards need to extend the bootargs by some additional
	189	* parameters (like Makalu)
	190	*/
	191	#if !defined(CONFIG_ADDMISC)
	192	#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
	193	#endif
	194
a8a11a9e SR	195	/*
	196	* General common environment variables shared on all AMCC eval boards
	197	*/
	198	#define CONFIG_AMCC_DEF_ENV \
93ea89f0	199	"netdev=" __stringify(CONFIG_USE_NETDEV) "\0" \
a8a11a9e SR	200	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	201	"nfsroot=${serverip}:${rootpath}\0" \
	202	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	203	"addip=setenv bootargs ${bootargs} " \
	204	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	205	":${hostname}:${netdev}:off panic=1\0" \
	206	"addtty=setenv bootargs ${bootargs}" \
93ea89f0	207	" console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0" \
a8a11a9e SR	208	CONFIG_ADDMISC \
a8a11a9e SR	209	"initrd_high=30000000\0" \
27dd5f8e SR	210	"kernel_addr_r=1000000\0" \
	211	"fdt_addr_r=1800000\0" \
	212	"ramdisk_addr_r=1900000\0" \
93ea89f0 MV	213	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
	214	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	215	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
a8a11a9e SR	216	CONFIG_AMCC_DEF_ENV_ROOTPATH
	217
	218	/*
	219	* Default environment for arch/powerpc booting
	220	* for boards that are ported to arch/powerpc
	221	*/
	222	#define CONFIG_AMCC_DEF_ENV_POWERPC \
	223	"flash_self=run ramargs addip addtty addmisc;" \
	224	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
	225	"flash_nfs=run nfsargs addip addtty addmisc;" \
	226	"bootm ${kernel_addr} - ${fdt_addr}\0" \
	227	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	228	"tftp ${fdt_addr_r} ${fdt_file}; " \
	229	"run nfsargs addip addtty addmisc;" \
	230	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
f09f09d3 AG	231	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
	232	"tftp ${fdt_addr_r} ${fdt_file};" \
	233	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
	234	"net_self=run net_self_load;" \
	235	"run ramargs addip addtty addmisc;" \
	236	"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
93ea89f0	237	"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"
a8a11a9e SR	238
	239	/*
	240	* Default environment for arch/ppc booting,
	241	* for boards that are not ported to arch/powerpc yet
	242	*/
	243	#define CONFIG_AMCC_DEF_ENV_PPC \
	244	"flash_self=run ramargs addip addtty addmisc;" \
	245	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	246	"flash_nfs=run nfsargs addip addtty addmisc;" \
	247	"bootm ${kernel_addr}\0" \
	248	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	249	"run nfsargs addip addtty addmisc;" \
	250	"bootm ${kernel_addr_r}\0"
	251
	252	/*
	253	* Default environment for arch/ppc booting (old version),
	254	* for boards that are ported to arch/ppc and arch/powerpc
	255	*/
	256	#define CONFIG_AMCC_DEF_ENV_PPC_OLD \
	257	"flash_self_old=run ramargs addip addtty addmisc;" \
	258	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	259	"flash_nfs_old=run nfsargs addip addtty addmisc;" \
	260	"bootm ${kernel_addr}\0" \
	261	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
	262	"run nfsargs addip addtty addmisc;" \
	263	"bootm ${kernel_addr_r}\0"
	264
	265	#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
93ea89f0	266	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
c8355b9d	267	"load=tftp 200000 ${u-boot}\0" \
93ea89f0 MV	268	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
	269	"era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
	270	"cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
a8a11a9e SR	271	"upd=run load update\0" \
	272
	273	#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
93ea89f0	274	"u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
c8355b9d	275	"nload=tftp 200000 ${u-boot-nand}\0" \
acfbbb90	276	"nupdate=nand erase 0 100000;nand write 200000 0 100000\0" \
a8a11a9e SR	277	"nupd=run nload nupdate\0"
	278
	279	#endif /* __AMCC_COMMON_H */