]>
Commit | Line | Data |
---|---|---|
22ee6473 SG |
1 | /* |
2 | * (C) Copyright 2007-2008 | |
3 | * Stelian Pop <stelian.pop@leadtechdesign.com> | |
4 | * Lead Tech Design <www.leadtechdesign.com> | |
5 | * | |
6 | * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). | |
7 | * | |
8 | * See file CREDITS for list of people who contributed to this | |
9 | * project. | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or | |
12 | * modify it under the terms of the GNU General Public License as | |
13 | * published by the Free Software Foundation; either version 2 of | |
14 | * the License, or (at your option) any later version. | |
15 | * | |
16 | * This program is distributed in the hope that it will be useful, | |
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | * GNU General Public License for more details. | |
20 | * | |
21 | * You should have received a copy of the GNU General Public License | |
22 | * along with this program; if not, write to the Free Software | |
23 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
24 | * MA 02111-1307 USA | |
25 | */ | |
26 | ||
27 | #ifndef __CONFIG_H | |
28 | #define __CONFIG_H | |
29 | ||
30 | /* ARM asynchronous clock */ | |
31 | #define AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ | |
32 | #define CONFIG_SYS_HZ 1000 | |
33 | ||
34 | #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ | |
35 | #ifdef CONFIG_AT91SAM9M10G45EK | |
36 | #define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/ | |
37 | #else | |
38 | #define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ | |
39 | #endif | |
40 | #define CONFIG_ARCH_CPU_INIT | |
41 | #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ | |
42 | ||
43 | #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
44 | #define CONFIG_SETUP_MEMORY_TAGS 1 | |
45 | #define CONFIG_INITRD_TAG 1 | |
46 | ||
47 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
48 | #define CONFIG_SKIP_RELOCATE_UBOOT | |
49 | ||
50 | /* | |
51 | * Hardware drivers | |
52 | */ | |
53 | #define CONFIG_ATMEL_USART 1 | |
54 | #undef CONFIG_USART0 | |
55 | #undef CONFIG_USART1 | |
56 | #undef CONFIG_USART2 | |
57 | #define CONFIG_USART3 1 /* USART 3 is DBGU */ | |
58 | ||
59 | /* LCD */ | |
60 | #define CONFIG_LCD 1 | |
61 | #define LCD_BPP LCD_COLOR8 | |
62 | #define CONFIG_LCD_LOGO 1 | |
63 | #undef LCD_TEST_PATTERN | |
64 | #define CONFIG_LCD_INFO 1 | |
65 | #define CONFIG_LCD_INFO_BELOW_LOGO 1 | |
66 | #define CONFIG_SYS_WHITE_ON_BLACK 1 | |
67 | #define CONFIG_ATMEL_LCD 1 | |
68 | #define CONFIG_ATMEL_LCD_RGB565 1 | |
69 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 | |
70 | /* board specific(not enough SRAM) */ | |
71 | #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 | |
72 | ||
73 | /* LED */ | |
74 | #define CONFIG_AT91_LED | |
75 | #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ | |
76 | #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ | |
77 | ||
78 | #define CONFIG_BOOTDELAY 3 | |
79 | ||
80 | /* | |
81 | * BOOTP options | |
82 | */ | |
83 | #define CONFIG_BOOTP_BOOTFILESIZE 1 | |
84 | #define CONFIG_BOOTP_BOOTPATH 1 | |
85 | #define CONFIG_BOOTP_GATEWAY 1 | |
86 | #define CONFIG_BOOTP_HOSTNAME 1 | |
87 | ||
88 | /* | |
89 | * Command line configuration. | |
90 | */ | |
91 | #include <config_cmd_default.h> | |
92 | #undef CONFIG_CMD_BDI | |
93 | #undef CONFIG_CMD_FPGA | |
94 | #undef CONFIG_CMD_IMI | |
95 | #undef CONFIG_CMD_IMLS | |
96 | #undef CONFIG_CMD_AUTOSCRIPT | |
97 | #undef CONFIG_CMD_LOADS | |
98 | ||
99 | #define CONFIG_CMD_PING 1 | |
100 | #define CONFIG_CMD_DHCP 1 | |
101 | #define CONFIG_CMD_NAND 1 | |
102 | #define CONFIG_CMD_USB 1 | |
103 | ||
104 | /* SDRAM */ | |
105 | #define CONFIG_NR_DRAM_BANKS 1 | |
106 | #define PHYS_SDRAM 0x70000000 | |
107 | #define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ | |
108 | ||
109 | /* DataFlash */ | |
110 | #ifdef CONFIG_ATMEL_SPI | |
111 | #define CONFIG_CMD_SF | |
112 | #define CONFIG_CMD_SPI | |
113 | #define CONFIG_SPI_FLASH 1 | |
114 | #define CONFIG_SPI_FLASH_ATMEL 1 | |
115 | #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 | |
116 | #endif | |
117 | ||
118 | /* NOR flash, if populated */ | |
119 | #ifndef CONFIG_CMD_NAND | |
120 | #define CONFIG_SYS_NO_FLASH 1 | |
121 | #else | |
122 | #define CONFIG_SYS_FLASH_CFI 1 | |
123 | #define CONFIG_FLASH_CFI_DRIVER 1 | |
124 | #define PHYS_FLASH_1 0x10000000 | |
125 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
126 | #define CONFIG_SYS_MAX_FLASH_SECT 256 | |
127 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
128 | #endif | |
129 | ||
130 | /* NAND flash */ | |
131 | #ifdef CONFIG_CMD_NAND | |
132 | #define CONFIG_NAND_MAX_CHIPS 1 | |
133 | #define CONFIG_NAND_ATMEL | |
134 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
135 | #define CONFIG_SYS_NAND_BASE 0x40000000 | |
136 | #define CONFIG_SYS_NAND_DBW_8 1 | |
137 | /* our ALE is AD21 */ | |
138 | #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) | |
139 | /* our CLE is AD22 */ | |
140 | #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) | |
141 | #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 | |
142 | #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 | |
143 | #endif | |
144 | ||
145 | /* Ethernet */ | |
146 | #define CONFIG_MACB 1 | |
147 | #define CONFIG_RMII 1 | |
148 | #define CONFIG_NET_MULTI 1 | |
149 | #define CONFIG_NET_RETRY_COUNT 20 | |
150 | #define CONFIG_RESET_PHY_R 1 | |
151 | ||
152 | /* USB */ | |
153 | #define CONFIG_USB_ATMEL | |
154 | #define CONFIG_USB_OHCI_NEW 1 | |
155 | #define CONFIG_DOS_PARTITION 1 | |
156 | #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 | |
157 | #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ | |
158 | #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" | |
159 | #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 | |
160 | #define CONFIG_USB_STORAGE 1 | |
161 | ||
162 | #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ | |
163 | ||
164 | #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM | |
165 | #define CONFIG_SYS_MEMTEST_END 0x23e00000 | |
166 | ||
167 | #ifdef CONFIG_SYS_USE_DATAFLASH | |
168 | ||
169 | /* bootstrap + u-boot + env + linux in dataflash on CS0 */ | |
170 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 | |
171 | #define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400) | |
172 | #define CONFIG_ENV_OFFSET 0x4200 | |
173 | #define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET) | |
174 | #define CONFIG_ENV_SIZE 0x4200 | |
175 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
176 | #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" | |
177 | #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ | |
178 | "root=/dev/mtdblock0 " \ | |
179 | "mtdparts=at91_nand:-(root) "\ | |
180 | "rw rootfstype=jffs2" | |
181 | ||
182 | #else /* CONFIG_SYS_USE_NANDFLASH */ | |
183 | ||
184 | /* bootstrap + u-boot + env + linux in nandflash */ | |
185 | #define CONFIG_ENV_IS_IN_NAND 1 | |
186 | #define CONFIG_ENV_OFFSET 0x60000 | |
187 | #define CONFIG_ENV_OFFSET_REDUND 0x80000 | |
188 | #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ | |
189 | #define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" | |
190 | #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ | |
191 | "root=/dev/mtdblock5 " \ | |
192 | "mtdparts=at91_nand:128k(bootstrap)ro, \ | |
193 | 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \ | |
194 | 2M(linux),-(root) " \ | |
195 | "rw rootfstype=jffs2" | |
196 | ||
197 | #endif | |
198 | ||
199 | #define CONFIG_BAUDRATE 115200 | |
200 | #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } | |
201 | ||
202 | #define CONFIG_SYS_PROMPT "U-Boot> " | |
203 | #define CONFIG_SYS_CBSIZE 256 | |
204 | #define CONFIG_SYS_MAXARGS 16 | |
205 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
206 | #define CONFIG_SYS_LONGHELP 1 | |
207 | #define CONFIG_CMDLINE_EDITING 1 | |
208 | #define CONFIG_AUTO_COMPLETE | |
209 | #define CONFIG_SYS_HUSH_PARSER | |
210 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
211 | ||
212 | #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) | |
213 | /* | |
214 | * Size of malloc() pool | |
215 | */ | |
216 | #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) | |
217 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ | |
218 | ||
219 | #define CONFIG_STACKSIZE (32*1024) /* regular stack */ | |
220 | ||
221 | #ifdef CONFIG_USE_IRQ | |
222 | #error CONFIG_USE_IRQ not supported | |
223 | #endif | |
224 | ||
225 | #endif |