[people/ms/u-boot.git] / include / configs / bcm28155_ap.h

/*
 * Copyright 2013 Broadcom Corporation.
 *
 * SPDX-License-Identifier:      GPL-2.0+
 */

#ifndef __BCM28155_AP_H
#define __BCM28155_AP_H

#include <linux/sizes.h>
#include <asm/arch/sysmap.h>

/* CPU, chip, mach, etc */
#define CONFIG_KONA
#define CONFIG_SKIP_LOWLEVEL_INIT

/*
 * Memory configuration
 */
#define CONFIG_SYS_TEXT_BASE		0xae000000

#define CONFIG_SYS_SDRAM_BASE		0x80000000
#define CONFIG_SYS_SDRAM_SIZE		0x80000000
#define CONFIG_NR_DRAM_BANKS		1

#define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
#define CONFIG_STACKSIZE		SZ_256K

/* GPIO Driver */
#define CONFIG_KONA_GPIO

/* MMC/SD Driver */
#define CONFIG_SDHCI
#define CONFIG_MMC_SDMA
#define CONFIG_KONA_SDHCI
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC

#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
#define CONFIG_SYS_SDIO0_MAX_CLK 48000000
#define CONFIG_SYS_SDIO1_MAX_CLK 48000000
#define CONFIG_SYS_SDIO2_MAX_CLK 48000000
#define CONFIG_SYS_SDIO3_MAX_CLK 48000000
#define CONFIG_SYS_SDIO0 "sdio1"
#define CONFIG_SYS_SDIO1 "sdio2"
#define CONFIG_SYS_SDIO2 "sdio3"
#define CONFIG_SYS_SDIO3 "sdio4"

/* I2C Driver */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_KONA
#define CONFIG_SYS_SPD_BUS_NUM	3	/* Start with PMU bus */
#define CONFIG_SYS_MAX_I2C_BUS	4
#define CONFIG_SYS_I2C_BASE0	BSC1_BASE_ADDR
#define CONFIG_SYS_I2C_BASE1	BSC2_BASE_ADDR
#define CONFIG_SYS_I2C_BASE2	BSC3_BASE_ADDR
#define CONFIG_SYS_I2C_BASE3	PMU_BSC_BASE_ADDR

/* Timer Driver */
#define CONFIG_SYS_TIMER_RATE		32000
#define CONFIG_SYS_TIMER_COUNTER	(TIMER_BASE_ADDR + 4) /* STCLO offset */

/* Init functions */
#define CONFIG_MISC_INIT_R	/* board's misc_init_r function */

/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

/* No mtest functions as recommended */

/*
 * This is the initial SP which is used only briefly for relocating the u-boot
 * image to the top of SDRAM. After relocation u-boot moves the stack to the
 * proper place.
 */
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* Serial Info */
#define CONFIG_SYS_NS16550_SERIAL
/* Post pad 3 bytes after each reg addr */
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		13000000
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_COM1		0x3e000000

#define CONFIG_BAUDRATE			115200

#define CONFIG_ENV_SIZE			0x10000
#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */

/* console configuration */
#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
#define CONFIG_SYS_MAXARGS		64
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/*
 * One partition type must be defined for part.c
 * This is necessary for the fatls command to work on an SD card
 * for example.
 */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/* version string, parser, etc */
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP

#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC

/* Initial upstream - boot to cmd prompt only */
#define CONFIG_BOOTCOMMAND		""

/* Commands */
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#define CONFIG_CMD_BOOTZ
#define CONFIG_FAT_WRITE


/* Fastboot and USB OTG */
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_FASTBOOT_FLASH
#define CONFIG_FASTBOOT_FLASH_MMC_DEV	0
#define CONFIG_SYS_CACHELINE_SIZE	64
#define CONFIG_FASTBOOT_BUF_SIZE	(CONFIG_SYS_SDRAM_SIZE - SZ_1M)
#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW	0
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USBID_ADDR		0x34052c46
#define CONFIG_G_DNL_VENDOR_NUM		0x18d1	/* google */
#define CONFIG_G_DNL_PRODUCT_NUM	0x0d02	/* nexus one */
#define CONFIG_G_DNL_MANUFACTURER	"Broadcom Corporation"

/* Fastboot and USB OTG */
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_FASTBOOT_FLASH
#define CONFIG_FASTBOOT_FLASH_MMC_DEV	0
#define CONFIG_SYS_CACHELINE_SIZE	64
#define CONFIG_USB_FASTBOOT_BUF_SIZE	(CONFIG_SYS_SDRAM_SIZE - SZ_1M)
#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW	0
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USBID_ADDR		0x34052c46
#define CONFIG_G_DNL_VENDOR_NUM		0x18d1	/* google */
#define CONFIG_G_DNL_PRODUCT_NUM	0x0d02	/* nexus one */
#define CONFIG_G_DNL_MANUFACTURER	"Broadcom Corporation"

#endif /* __BCM28155_AP_H */
Commit	Line	Data
9ed679ae DR	1	/*
	2	* Copyright 2013 Broadcom Corporation.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __BCM28155_AP_H
	8	#define __BCM28155_AP_H
	9
1ace4022	10	#include <linux/sizes.h>
9ed679ae DR	11	#include <asm/arch/sysmap.h>
9ed679ae DR	12
3fcfe803	13	/* CPU, chip, mach, etc */
9ed679ae DR	14	#define CONFIG_KONA
	15	#define CONFIG_SKIP_LOWLEVEL_INIT
	16
	17	/*
	18	* Memory configuration
	19	*/
	20	#define CONFIG_SYS_TEXT_BASE 0xae000000
	21
	22	#define CONFIG_SYS_SDRAM_BASE 0x80000000
	23	#define CONFIG_SYS_SDRAM_SIZE 0x80000000
	24	#define CONFIG_NR_DRAM_BANKS 1
	25
	26	#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
	27	#define CONFIG_STACKSIZE SZ_256K
	28
	29	/* GPIO Driver */
	30	#define CONFIG_KONA_GPIO
	31
	32	/* MMC/SD Driver */
	33	#define CONFIG_SDHCI
	34	#define CONFIG_MMC_SDMA
	35	#define CONFIG_KONA_SDHCI
	36	#define CONFIG_MMC
	37	#define CONFIG_GENERIC_MMC
	38
	39	#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
	40	#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
	41	#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
	42	#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
	43	#define CONFIG_SYS_SDIO0_MAX_CLK 48000000
	44	#define CONFIG_SYS_SDIO1_MAX_CLK 48000000
	45	#define CONFIG_SYS_SDIO2_MAX_CLK 48000000
	46	#define CONFIG_SYS_SDIO3_MAX_CLK 48000000
	47	#define CONFIG_SYS_SDIO0 "sdio1"
	48	#define CONFIG_SYS_SDIO1 "sdio2"
	49	#define CONFIG_SYS_SDIO2 "sdio3"
	50	#define CONFIG_SYS_SDIO3 "sdio4"
	51
	52	/* I2C Driver */
	53	#define CONFIG_SYS_I2C
	54	#define CONFIG_SYS_I2C_KONA
	55	#define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */
	56	#define CONFIG_SYS_MAX_I2C_BUS 4
	57	#define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR
	58	#define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR
	59	#define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR
	60	#define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR
	61
	62	/* Timer Driver */
	63	#define CONFIG_SYS_TIMER_RATE 32000
	64	#define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */
	65
	66	/* Init functions */
	67	#define CONFIG_MISC_INIT_R /* board's misc_init_r function */
	68
	69	/* Some commands use this as the default load address */
	70	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
	71
	72	/* No mtest functions as recommended */
9ed679ae DR	73
	74	/*
	75	* This is the initial SP which is used only briefly for relocating the u-boot
	76	* image to the top of SDRAM. After relocation u-boot moves the stack to the
	77	* proper place.
	78	*/
	79	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
	80
	81	/* Serial Info */
9ed679ae DR	82	#define CONFIG_SYS_NS16550_SERIAL
	83	/* Post pad 3 bytes after each reg addr */
	84	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	85	#define CONFIG_SYS_NS16550_CLK 13000000
	86	#define CONFIG_CONS_INDEX 1
	87	#define CONFIG_SYS_NS16550_COM1 0x3e000000
	88
	89	#define CONFIG_BAUDRATE 115200
	90
	91	#define CONFIG_ENV_SIZE 0x10000
	92	#define CONFIG_ENV_IS_NOWHERE
	93
	94	#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
	95
	96	/* console configuration */
	97	#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
	98	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	99	sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
	100	#define CONFIG_SYS_MAXARGS 64
	101	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	102
	103	/*
	104	* One partition type must be defined for part.c
	105	* This is necessary for the fatls command to work on an SD card
	106	* for example.
	107	*/
	108	#define CONFIG_DOS_PARTITION
d00bf781	109	#define CONFIG_EFI_PARTITION
9ed679ae DR	110
	111	/* version string, parser, etc */
	112	#define CONFIG_VERSION_VARIABLE
	113	#define CONFIG_AUTO_COMPLETE
	114	#define CONFIG_SYS_HUSH_PARSER
	115	#define CONFIG_CMDLINE_EDITING
	116	#define CONFIG_SYS_LONGHELP
	117
	118	#define CONFIG_CRC32_VERIFY
	119	#define CONFIG_MX_CYCLIC
	120
	121	/* Initial upstream - boot to cmd prompt only */
	122	#define CONFIG_BOOTCOMMAND ""
	123
	124	/* Commands */
9ed679ae DR	125	#define CONFIG_CMD_ASKENV
	126	#define CONFIG_CMD_CACHE
	127	#define CONFIG_CMD_FAT
9ed679ae DR	128	#define CONFIG_CMD_I2C
	129	#define CONFIG_CMD_MMC
	130	#define CONFIG_CMD_BOOTZ
	131	#define CONFIG_FAT_WRITE
	132
9ed679ae	133
d00bf781 JZ	134	/* Fastboot and USB OTG */
	135	#define CONFIG_USB_FUNCTION_FASTBOOT
	136	#define CONFIG_CMD_FASTBOOT
	137	#define CONFIG_FASTBOOT_FLASH
	138	#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
	139	#define CONFIG_SYS_CACHELINE_SIZE 64
a588d99a PK	140	#define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
a588d99a PK	141	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
d00bf781 JZ	142	#define CONFIG_USB_GADGET
	143	#define CONFIG_USB_GADGET_DUALSPEED
	144	#define CONFIG_USB_GADGET_VBUS_DRAW 0
	145	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	146	#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
	147	#define CONFIG_USB_GADGET_DOWNLOAD
	148	#define CONFIG_USBID_ADDR 0x34052c46
	149	#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
	150	#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
	151	#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
	152
1bf73bde JZ	153	/* Fastboot and USB OTG */
	154	#define CONFIG_USB_FUNCTION_FASTBOOT
	155	#define CONFIG_CMD_FASTBOOT
	156	#define CONFIG_FASTBOOT_FLASH
	157	#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
	158	#define CONFIG_SYS_CACHELINE_SIZE 64
	159	#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
	160	#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
	161	#define CONFIG_USB_GADGET
	162	#define CONFIG_USB_GADGET_DUALSPEED
	163	#define CONFIG_USB_GADGET_VBUS_DRAW 0
	164	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	165	#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
	166	#define CONFIG_USB_GADGET_DOWNLOAD
	167	#define CONFIG_USBID_ADDR 0x34052c46
	168	#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
	169	#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
	170	#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
	171
9ed679ae	172	#endif /* __BCM28155_AP_H */