[people/ms/u-boot.git] / include / configs / bcm_ep_board.h

/*
 * Copyright 2014 Broadcom Corporation.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __BCM_EP_BOARD_H
#define __BCM_EP_BOARD_H

#include <asm/arch/configs.h>

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_SYS_GENERIC_BOARD

/*
 * Memory configuration
 * (these must be defined elsewhere)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#error	CONFIG_SYS_TEXT_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_BASE
#error	CONFIG_SYS_SDRAM_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_SIZE
#error	CONFIG_SYS_SDRAM_SIZE must be defined!
#endif

#define CONFIG_NR_DRAM_BANKS		1

#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
#define CONFIG_STACKSIZE		(256 * 1024)

/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

/* No mtest functions as recommended */
#undef CONFIG_CMD_MEMORY

/*
 * This is the initial SP which is used only briefly for relocating the u-boot
 * image to the top of SDRAM. After relocation u-boot moves the stack to the
 * proper place.
 */
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Serial Info */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL

#define CONFIG_BAUDRATE			115200

#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */

/* console configuration */
#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
#define CONFIG_SYS_MAXARGS		64
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/*
 * One partition type must be defined for part.c
 * This is necessary for the fatls command to work on an SD card
 * for example.
 */
#define CONFIG_DOS_PARTITION

/* version string, parser, etc */
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
#define CONFIG_SYS_LONGHELP

#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC

/* Commands */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE

/* Enable devicetree support */
#define CONFIG_OF_LIBFDT

/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
#define CONFIG_SHA1
#define CONFIG_SHA256

/* Enable Time Command */
#define CONFIG_CMD_TIME

#define CONFIG_CMD_BOOTZ

/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY

#endif /* __BCM_EP_BOARD_H */
Commit	Line	Data
da1f5ac2 SB	1	/*
	2	* Copyright 2014 Broadcom Corporation.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __BCM_EP_BOARD_H
	8	#define __BCM_EP_BOARD_H
	9
	10	#include <asm/arch/configs.h>
	11
da1f5ac2 SB	12	#define CONFIG_SKIP_LOWLEVEL_INIT
	13
	14	#define CONFIG_SYS_GENERIC_BOARD
	15
	16	/*
	17	* Memory configuration
	18	* (these must be defined elsewhere)
	19	*/
	20	#ifndef CONFIG_SYS_TEXT_BASE
	21	#error CONFIG_SYS_TEXT_BASE must be defined!
	22	#endif
	23	#ifndef CONFIG_SYS_SDRAM_BASE
	24	#error CONFIG_SYS_SDRAM_BASE must be defined!
	25	#endif
	26	#ifndef CONFIG_SYS_SDRAM_SIZE
	27	#error CONFIG_SYS_SDRAM_SIZE must be defined!
	28	#endif
	29
	30	#define CONFIG_NR_DRAM_BANKS 1
	31
	32	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
	33	#define CONFIG_STACKSIZE (256 * 1024)
	34
	35	/* Some commands use this as the default load address */
	36	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
	37
	38	/* No mtest functions as recommended */
	39	#undef CONFIG_CMD_MEMORY
	40
	41	/*
	42	* This is the initial SP which is used only briefly for relocating the u-boot
	43	* image to the top of SDRAM. After relocation u-boot moves the stack to the
	44	* proper place.
	45	*/
	46	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
	47
	48	/* allow to overwrite serial and ethaddr */
	49	#define CONFIG_ENV_OVERWRITE
	50
	51	/* Serial Info */
	52	#define CONFIG_SYS_NS16550
	53	#define CONFIG_SYS_NS16550_SERIAL
	54
	55	#define CONFIG_BAUDRATE 115200
	56
	57	#define CONFIG_ENV_SIZE 0x2000
	58	#define CONFIG_ENV_IS_NOWHERE
	59
	60	#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
	61
	62	/* console configuration */
	63	#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
	64	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	65	sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
	66	#define CONFIG_SYS_MAXARGS 64
	67	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	68
	69	/*
	70	* One partition type must be defined for part.c
	71	* This is necessary for the fatls command to work on an SD card
	72	* for example.
	73	*/
	74	#define CONFIG_DOS_PARTITION
	75
76	/* version string, parser, etc */
77	#define CONFIG_VERSION_VARIABLE
78	#define CONFIG_AUTO_COMPLETE
79	#define CONFIG_SYS_HUSH_PARSER
80	#define CONFIG_CMDLINE_EDITING
81	#define CONFIG_COMMAND_HISTORY
82	#define CONFIG_SYS_LONGHELP
83
84	#define CONFIG_CRC32_VERIFY
85	#define CONFIG_MX_CYCLIC
86
87	/* Commands */
88	#include <config_cmd_default.h>
89
90	#define CONFIG_CMD_ASKENV
91	#define CONFIG_CMD_CACHE
92	#define CONFIG_CMD_FAT
93	#define CONFIG_FAT_WRITE
94
95	/* Enable devicetree support */
96	#define CONFIG_OF_LIBFDT
97
98	/* SHA hashing */
99	#define CONFIG_CMD_HASH
100	#define CONFIG_HASH_VERIFY
101	#define CONFIG_SHA1
102	#define CONFIG_SHA256
103
104	/* Enable Time Command */
105	#define CONFIG_CMD_TIME
106
107	#define CONFIG_CMD_BOOTZ
108
109	/* Misc utility code */
110	#define CONFIG_BOUNCE_BUFFER
111	#define CONFIG_CRC32_VERIFY
112
113	#endif /* __BCM_EP_BOARD_H */