]>
Commit | Line | Data |
---|---|---|
84a9dda3 MF |
1 | /* |
2 | * U-boot - Configuration file for BF518F EZBrd board | |
3 | */ | |
4 | ||
5 | #ifndef __CONFIG_BF518F_EZBRD_H__ | |
6 | #define __CONFIG_BF518F_EZBRD_H__ | |
7 | ||
f348ab85 | 8 | #include <asm/config-pre.h> |
84a9dda3 MF |
9 | |
10 | ||
11 | /* | |
12 | * Processor Settings | |
13 | */ | |
14 | #define CONFIG_BFIN_CPU bf518-0.0 | |
15 | #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA | |
16 | ||
17 | ||
18 | /* | |
19 | * Clock Settings | |
20 | * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV | |
21 | * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV | |
22 | */ | |
23 | /* CONFIG_CLKIN_HZ is any value in Hz */ | |
24 | #define CONFIG_CLKIN_HZ 25000000 | |
25 | /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ | |
26 | /* 1 = CLKIN / 2 */ | |
27 | #define CONFIG_CLKIN_HALF 0 | |
28 | /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ | |
29 | /* 1 = bypass PLL */ | |
30 | #define CONFIG_PLL_BYPASS 0 | |
31 | /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ | |
32 | /* Values can range from 0-63 (where 0 means 64) */ | |
33 | #define CONFIG_VCO_MULT 16 | |
34 | /* CCLK_DIV controls the core clock divider */ | |
35 | /* Values can be 1, 2, 4, or 8 ONLY */ | |
36 | #define CONFIG_CCLK_DIV 1 | |
37 | /* SCLK_DIV controls the system clock divider */ | |
38 | /* Values can range from 1-15 */ | |
39 | #define CONFIG_SCLK_DIV 5 | |
40 | ||
41 | ||
42 | /* | |
43 | * Memory Settings | |
44 | */ | |
45 | /* This board has a 64meg MT48H32M16 */ | |
46 | #define CONFIG_MEM_ADD_WDTH 10 | |
47 | #define CONFIG_MEM_SIZE 64 | |
48 | ||
49 | #define CONFIG_EBIU_SDRRC_VAL 0x0096 | |
50 | #define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS) | |
51 | ||
52 | #define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) | |
53 | #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) | |
54 | #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) | |
55 | ||
56 | #define CONFIG_SYS_MONITOR_LEN (384 * 1024) | |
57 | #define CONFIG_SYS_MALLOC_LEN (384 * 1024) | |
58 | ||
59 | ||
60 | /* | |
61 | * Network Settings | |
62 | */ | |
63 | #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__) | |
64 | #define ADI_CMDS_NETWORK 1 | |
65 | #define CONFIG_BFIN_MAC | |
66 | #define CONFIG_NETCONSOLE 1 | |
67 | #define CONFIG_NET_MULTI 1 | |
68 | #endif | |
69 | #define CONFIG_HOSTNAME bf518f-ezbrd | |
70 | #define CONFIG_PHY_ADDR 3 | |
71 | /* Uncomment next line to use fixed MAC address */ | |
72 | /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ | |
73 | ||
74 | ||
75 | /* | |
76 | * Flash Settings | |
77 | */ | |
78 | #define CONFIG_FLASH_CFI_DRIVER | |
79 | #define CONFIG_SYS_FLASH_BASE 0x20000000 | |
80 | #define CONFIG_SYS_FLASH_CFI | |
81 | #define CONFIG_SYS_FLASH_PROTECTION | |
82 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
83 | #define CONFIG_SYS_MAX_FLASH_SECT 71 | |
84 | ||
85 | ||
86 | /* | |
87 | * SPI Settings | |
88 | */ | |
89 | #define CONFIG_BFIN_SPI | |
90 | #define CONFIG_ENV_SPI_MAX_HZ 30000000 | |
afac8b07 | 91 | #define CONFIG_SF_DEFAULT_SPEED 30000000 |
84a9dda3 | 92 | #define CONFIG_SPI_FLASH |
f52efcae | 93 | #define CONFIG_SPI_FLASH_SST |
84a9dda3 MF |
94 | #define CONFIG_SPI_FLASH_STMICRO |
95 | ||
96 | ||
97 | /* | |
98 | * Env Storage Settings | |
99 | */ | |
100 | #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) | |
101 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
102 | #define CONFIG_ENV_OFFSET 0x10000 | |
103 | #define CONFIG_ENV_SIZE 0x2000 | |
104 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
105 | #else | |
106 | #define CONFIG_ENV_IS_IN_FLASH | |
107 | #define CONFIG_ENV_OFFSET 0x4000 | |
108 | #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | |
109 | #define CONFIG_ENV_SIZE 0x2000 | |
110 | #define CONFIG_ENV_SECT_SIZE 0x2000 | |
111 | #endif | |
112 | #define ENV_IS_EMBEDDED_CUSTOM | |
113 | ||
114 | ||
115 | /* | |
116 | * I2C Settings | |
117 | */ | |
118 | #define CONFIG_BFIN_TWI_I2C 1 | |
119 | #define CONFIG_HARD_I2C 1 | |
120 | #define CONFIG_SYS_I2C_SPEED 50000 | |
121 | #define CONFIG_SYS_I2C_SLAVE 0 | |
122 | ||
123 | ||
124 | /* | |
125 | * SDH Settings | |
126 | */ | |
127 | #if !defined(__ADSPBF512__) | |
128 | #define CONFIG_MMC | |
129 | #define CONFIG_BFIN_SDH | |
130 | #endif | |
131 | ||
132 | ||
133 | /* | |
134 | * Misc Settings | |
135 | */ | |
ab687907 | 136 | #define CONFIG_BOARD_EARLY_INIT_F |
84a9dda3 MF |
137 | #define CONFIG_MISC_INIT_R |
138 | #define CONFIG_RTC_BFIN | |
139 | #define CONFIG_UART_CONSOLE 0 | |
140 | ||
141 | ||
142 | /* | |
143 | * Pull in common ADI header for remaining command/environment setup | |
144 | */ | |
145 | #include <configs/bfin_adi_common.h> | |
146 | ||
84a9dda3 | 147 | #endif |