]>
Commit | Line | Data |
---|---|---|
26bf7dec AL |
1 | /* |
2 | * U-boot - Configuration file for BF537 STAMP board | |
3 | */ | |
4 | ||
cf6f469e MF |
5 | #ifndef __CONFIG_BF537_STAMP_H__ |
6 | #define __CONFIG_BF537_STAMP_H__ | |
26bf7dec | 7 | |
f348ab85 | 8 | #include <asm/config-pre.h> |
f7ce12cb | 9 | |
26bf7dec | 10 | |
cf6f469e MF |
11 | /* |
12 | * Processor Settings | |
13 | */ | |
fbcf8e8c | 14 | #define CONFIG_BFIN_CPU bf537-0.2 |
cf6f469e | 15 | #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS |
26bf7dec | 16 | |
26bf7dec | 17 | |
cf6f469e MF |
18 | /* |
19 | * Clock Settings | |
20 | * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV | |
21 | * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV | |
22 | */ | |
23 | /* CONFIG_CLKIN_HZ is any value in Hz */ | |
24 | #define CONFIG_CLKIN_HZ 25000000 | |
25 | /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ | |
26 | /* 1 = CLKIN / 2 */ | |
27 | #define CONFIG_CLKIN_HALF 0 | |
28 | /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ | |
29 | /* 1 = bypass PLL */ | |
30 | #define CONFIG_PLL_BYPASS 0 | |
31 | /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ | |
32 | /* Values can range from 0-63 (where 0 means 64) */ | |
26bf7dec | 33 | #define CONFIG_VCO_MULT 20 |
cf6f469e MF |
34 | /* CCLK_DIV controls the core clock divider */ |
35 | /* Values can be 1, 2, 4, or 8 ONLY */ | |
26bf7dec | 36 | #define CONFIG_CCLK_DIV 1 |
cf6f469e MF |
37 | /* SCLK_DIV controls the system clock divider */ |
38 | /* Values can range from 1-15 */ | |
f82caacc | 39 | #define CONFIG_SCLK_DIV 4 |
26bf7dec | 40 | |
26bf7dec AL |
41 | |
42 | /* | |
cf6f469e | 43 | * Memory Settings |
26bf7dec | 44 | */ |
cf6f469e MF |
45 | #define CONFIG_MEM_ADD_WDTH 10 |
46 | #define CONFIG_MEM_SIZE 64 | |
47 | ||
48 | #define CONFIG_EBIU_SDRRC_VAL 0x306 | |
49 | #define CONFIG_EBIU_SDGCTL_VAL 0x91114d | |
50 | ||
51 | #define CONFIG_EBIU_AMGCTL_VAL 0xFF | |
52 | #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 | |
53 | #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 | |
54 | ||
955020c6 | 55 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
cf6f469e MF |
56 | #define CONFIG_SYS_MALLOC_LEN (384 * 1024) |
57 | ||
26bf7dec AL |
58 | |
59 | /* | |
60 | * Network Settings | |
61 | */ | |
cf6f469e MF |
62 | #ifndef __ADSPBF534__ |
63 | #define ADI_CMDS_NETWORK 1 | |
64 | #define CONFIG_BFIN_MAC | |
65 | #define CONFIG_NETCONSOLE 1 | |
26bf7dec | 66 | #endif |
cf6f469e | 67 | #define CONFIG_HOSTNAME bf537-stamp |
26bf7dec AL |
68 | /* Uncomment next line to use fixed MAC address */ |
69 | /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ | |
c42f56d9 | 70 | #define CONFIG_LIB_RAND |
26bf7dec | 71 | |
079a136c | 72 | /* |
cf6f469e | 73 | * Flash Settings |
079a136c | 74 | */ |
cf6f469e MF |
75 | #define CONFIG_FLASH_CFI_DRIVER |
76 | #define CONFIG_SYS_FLASH_BASE 0x20000000 | |
77 | #define CONFIG_SYS_FLASH_CFI | |
78 | #define CONFIG_SYS_FLASH_PROTECTION | |
79 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
80 | /* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */ | |
81 | #define CONFIG_SYS_MAX_FLASH_SECT 71 | |
079a136c JL |
82 | |
83 | ||
ba2351f9 | 84 | /* |
cf6f469e | 85 | * SPI Settings |
ba2351f9 | 86 | */ |
cf6f469e MF |
87 | #define CONFIG_BFIN_SPI |
88 | #define CONFIG_ENV_SPI_MAX_HZ 30000000 | |
afac8b07 | 89 | #define CONFIG_SF_DEFAULT_SPEED 30000000 |
cf6f469e | 90 | #define CONFIG_SPI_FLASH |
f453220c | 91 | #define CONFIG_SPI_FLASH_ALL |
ba2351f9 | 92 | |
ba2351f9 | 93 | |
cf6f469e MF |
94 | /* |
95 | * Env Storage Settings | |
96 | */ | |
97 | #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) | |
98 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
bc43a8d8 | 99 | #define CONFIG_ENV_OFFSET 0x10000 |
cf6f469e | 100 | #define CONFIG_ENV_SIZE 0x2000 |
bc43a8d8 | 101 | #define CONFIG_ENV_SECT_SIZE 0x10000 |
26bf7dec | 102 | #else |
cf6f469e MF |
103 | #define CONFIG_ENV_IS_IN_FLASH |
104 | #define CONFIG_ENV_OFFSET 0x4000 | |
105 | #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | |
106 | #define CONFIG_ENV_SIZE 0x2000 | |
107 | #define CONFIG_ENV_SECT_SIZE 0x2000 | |
26bf7dec | 108 | #endif |
cf6f469e MF |
109 | #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) |
110 | #define ENV_IS_EMBEDDED | |
26bf7dec | 111 | #else |
76d82187 | 112 | #define CONFIG_ENV_IS_EMBEDDED_IN_LDR |
26bf7dec | 113 | #endif |
9ff67e5e MF |
114 | #ifdef ENV_IS_EMBEDDED |
115 | /* WARNING - the following is hand-optimized to fit within | |
116 | * the sector before the environment sector. If it throws | |
117 | * an error during compilation remove an object here to get | |
118 | * it linked after the configuration sector. | |
119 | */ | |
120 | # define LDS_BOARD_TEXT \ | |
e2906a59 MY |
121 | arch/blackfin/lib/built-in.o (.text*); \ |
122 | arch/blackfin/cpu/built-in.o (.text*); \ | |
9ff67e5e | 123 | . = DEFINED(env_offset) ? env_offset : .; \ |
c70e7ddb | 124 | common/env_embedded.o (.text*); |
9ff67e5e | 125 | #endif |
6d0f6bcf | 126 | |
26bf7dec | 127 | |
cf6f469e MF |
128 | /* |
129 | * I2C Settings | |
130 | */ | |
c469703b | 131 | #define CONFIG_SYS_I2C |
fea9b69a | 132 | #define CONFIG_SYS_I2C_ADI |
26bf7dec | 133 | |
26bf7dec AL |
134 | |
135 | /* | |
cf6f469e | 136 | * SPI_MMC Settings |
26bf7dec | 137 | */ |
955020c6 SZ |
138 | #define CONFIG_MMC_SPI |
139 | #ifdef CONFIG_MMC_SPI | |
cf6f469e | 140 | #define CONFIG_MMC |
14dda9df | 141 | #define CONFIG_GENERIC_MMC |
955020c6 | 142 | #endif |
26bf7dec AL |
143 | |
144 | /* | |
cf6f469e | 145 | * NAND Settings |
26bf7dec | 146 | */ |
cd84423a | 147 | /* #define CONFIG_NAND_PLAT */ |
955020c6 | 148 | #ifdef CONFIG_NAND_PLAT |
cd84423a | 149 | #define CONFIG_SYS_NAND_BASE 0x20212000 |
6d0f6bcf | 150 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
cd84423a MF |
151 | |
152 | #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) | |
153 | #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) | |
cd84423a | 154 | #define BFIN_NAND_WRITE(addr, cmd) \ |
cf6f469e | 155 | do { \ |
cd84423a MF |
156 | bfin_write8(addr, cmd); \ |
157 | SSYNC(); \ | |
26bf7dec AL |
158 | } while (0) |
159 | ||
cd84423a MF |
160 | #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) |
161 | #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) | |
67ceefa7 | 162 | #define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 |
955020c6 | 163 | #endif /* CONFIG_NAND_PLAT */ |
26bf7dec AL |
164 | |
165 | /* | |
cf6f469e | 166 | * CF-CARD IDE-HDD Support |
26bf7dec | 167 | */ |
aa7b248a MH |
168 | |
169 | /* | |
170 | * Add CF flash card support in TRUE-IDE Mode (CF-IDE-NAND Card) | |
171 | * Strange address mapping Blackfin A13 connects to CF_A0 | |
172 | */ | |
173 | ||
174 | /* #define CONFIG_BFIN_TRUE_IDE */ | |
175 | ||
176 | /* | |
177 | * Add CF flash card support in Common Memory Mode (CF-IDE-NAND Card) | |
178 | * This should be the preferred mode | |
179 | */ | |
180 | ||
181 | /* #define CONFIG_BFIN_CF_IDE */ | |
182 | ||
183 | /* | |
184 | * Add IDE Disk Drive (HDD) support | |
185 | * See example interface here: | |
186 | * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:ide-blackfin | |
187 | */ | |
188 | ||
189 | /* #define CONFIG_BFIN_HDD_IDE */ | |
26bf7dec | 190 | |
cf6f469e MF |
191 | #if defined(CONFIG_BFIN_CF_IDE) || \ |
192 | defined(CONFIG_BFIN_HDD_IDE) || \ | |
193 | defined(CONFIG_BFIN_TRUE_IDE) | |
194 | # define CONFIG_BFIN_IDE 1 | |
195 | # define CONFIG_CMD_IDE | |
196 | #endif | |
26bf7dec | 197 | |
26bf7dec AL |
198 | #if defined(CONFIG_BFIN_IDE) |
199 | ||
200 | #define CONFIG_DOS_PARTITION 1 | |
201 | /* | |
202 | * IDE/ATA stuff | |
203 | */ | |
204 | #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ | |
205 | #undef CONFIG_IDE_LED /* no led for ide supported */ | |
206 | #undef CONFIG_IDE_RESET /* no reset for ide supported */ | |
207 | ||
cf6f469e MF |
208 | #define CONFIG_SYS_IDE_MAXBUS 1 |
209 | #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1) | |
26bf7dec | 210 | |
cf6f469e MF |
211 | #undef CONFIG_EBIU_AMBCTL1_VAL |
212 | #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC3FFC3 | |
26bf7dec AL |
213 | |
214 | #define CONFIG_CF_ATASEL_DIS 0x20311800 | |
215 | #define CONFIG_CF_ATASEL_ENA 0x20311802 | |
216 | ||
217 | #if defined(CONFIG_BFIN_TRUE_IDE) | |
218 | /* | |
219 | * Note that these settings aren't for the most part used in include/ata.h | |
220 | * when all of the ATA registers are setup | |
221 | */ | |
6d0f6bcf JCPV |
222 | #define CONFIG_SYS_ATA_BASE_ADDR 0x2031C000 |
223 | #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 | |
cf6f469e MF |
224 | #define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */ |
225 | #define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */ | |
226 | #define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */ | |
aa7b248a | 227 | #define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A13 */ |
26bf7dec | 228 | |
cf6f469e | 229 | #elif defined(CONFIG_BFIN_CF_IDE) |
6d0f6bcf JCPV |
230 | #define CONFIG_SYS_ATA_BASE_ADDR 0x20211800 |
231 | #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 | |
cf6f469e MF |
232 | #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* data I/O */ |
233 | #define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* normal register accesses */ | |
234 | #define CONFIG_SYS_ATA_ALT_OFFSET 0x000E /* alternate registers */ | |
aa7b248a | 235 | #define CONFIG_SYS_ATA_STRIDE 1 /* CF_A0=0, with /CE1 /CE2 odd/even byte selects */ |
26bf7dec | 236 | |
cf6f469e | 237 | #elif defined(CONFIG_BFIN_HDD_IDE) |
6d0f6bcf JCPV |
238 | #define CONFIG_SYS_ATA_BASE_ADDR 0x20314000 |
239 | #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 | |
cf6f469e MF |
240 | #define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */ |
241 | #define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */ | |
242 | #define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */ | |
6d0f6bcf | 243 | #define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */ |
26bf7dec AL |
244 | #undef CONFIG_SCLK_DIV |
245 | #define CONFIG_SCLK_DIV 8 | |
cf6f469e MF |
246 | #endif |
247 | ||
248 | #endif | |
26bf7dec | 249 | |
cf6f469e MF |
250 | |
251 | /* | |
252 | * Misc Settings | |
253 | */ | |
254 | #define CONFIG_MISC_INIT_R | |
255 | #define CONFIG_RTC_BFIN | |
256 | #define CONFIG_UART_CONSOLE 0 | |
257 | ||
cf6f469e MF |
258 | /* Define if want to do post memory test */ |
259 | #undef CONFIG_POST | |
260 | #ifdef CONFIG_POST | |
0fc47444 | 261 | #define CONFIG_SYS_POST_HOTKEYS_GPIO GPIO_PF5 |
2151374f MF |
262 | #define CONFIG_POST_BSPEC1_GPIO_LEDS \ |
263 | GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, | |
264 | #define CONFIG_POST_BSPEC2_GPIO_BUTTONS \ | |
265 | GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2, | |
266 | #define CONFIG_POST_BSPEC2_GPIO_NAMES \ | |
267 | 10, 11, 12, 13, | |
22f45ce4 MF |
268 | #define CONFIG_SYS_POST_FLASH_START 11 |
269 | #define CONFIG_SYS_POST_FLASH_END 71 | |
cf6f469e MF |
270 | #endif |
271 | ||
216818c1 MF |
272 | /* These are for board tests */ |
273 | #if 0 | |
274 | #define CONFIG_BOOTCOMMAND "bootldr 0x203f0100" | |
275 | #define CONFIG_AUTOBOOT_KEYED | |
276 | #define CONFIG_AUTOBOOT_PROMPT \ | |
277 | "autoboot in %d seconds: press space to stop\n", bootdelay | |
278 | #define CONFIG_AUTOBOOT_STOP_STR " " | |
279 | #endif | |
280 | ||
cf6f469e MF |
281 | |
282 | /* | |
283 | * Pull in common ADI header for remaining command/environment setup | |
284 | */ | |
285 | #include <configs/bfin_adi_common.h> | |
26bf7dec AL |
286 | |
287 | #endif |