]>
Commit | Line | Data |
---|---|---|
446707c9 VY |
1 | /* |
2 | * U-boot - Configuration file for BF561 Acvilon System On Module | |
3 | * For more information please go to http://www.niistt.ru/ | |
4 | */ | |
5 | ||
6 | #ifndef __CONFIG_BF561_ACVILON_H__ | |
7 | #define __CONFIG_BF561_ACVILON_H__ | |
8 | ||
9 | #include <asm/config-pre.h> | |
10 | ||
11 | ||
12 | /* | |
13 | * Processor Settings | |
14 | */ | |
fbcf8e8c MF |
15 | #define CONFIG_BFIN_CPU bf561-0.5 |
16 | #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS | |
446707c9 VY |
17 | |
18 | ||
19 | /* | |
20 | * Clock Settings | |
21 | * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV | |
22 | * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV | |
23 | */ | |
24 | /* CONFIG_CLKIN_HZ is any value in Hz */ | |
25 | #define CONFIG_CLKIN_HZ 12000000 | |
26 | /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ | |
27 | /* 1 = CLKIN / 2 */ | |
28 | #define CONFIG_CLKIN_HALF 0 | |
29 | /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ | |
30 | /* 1 = bypass PLL */ | |
31 | #define CONFIG_PLL_BYPASS 0 | |
32 | /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ | |
33 | /* Values can range from 0-63 (where 0 means 64) */ | |
34 | #define CONFIG_VCO_MULT 50 | |
35 | /* CCLK_DIV controls the core clock divider */ | |
36 | /* Values can be 1, 2, 4, or 8 ONLY */ | |
37 | #define CONFIG_CCLK_DIV 1 | |
38 | /* SCLK_DIV controls the system clock divider */ | |
39 | /* Values can range from 1-15 */ | |
40 | #define CONFIG_SCLK_DIV 5 | |
41 | ||
42 | ||
43 | /* | |
44 | * Memory Settings | |
45 | */ | |
46 | #define CONFIG_MEM_ADD_WDTH 10 | |
47 | #define CONFIG_MEM_SIZE 128 | |
48 | ||
49 | #define CONFIG_EBIU_SDRRC_VAL 0x300 | |
50 | #define CONFIG_EBIU_SDGCTL_VAL 0x00B11189 | |
51 | ||
52 | #define CONFIG_EBIU_AMGCTL_VAL 0x4e | |
53 | #define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 | |
54 | #define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554 | |
55 | ||
6e6b221c | 56 | #define CONFIG_SYS_MONITOR_LEN (384 * 1024) |
446707c9 VY |
57 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) |
58 | ||
59 | ||
60 | /* | |
61 | * RTC Settings | |
62 | */ | |
63 | #define CONFIG_RTC_DS1337 | |
64 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
65 | ||
66 | /* I2C SYSMON (LM75, AD7414 is almost compatible) */ | |
67 | #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ | |
68 | #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ | |
69 | #define CONFIG_SYS_I2C_DTT_ADDR 0x49 | |
70 | /*#define CONFIG_SYS_DTT_MAX_TEMP 70 | |
71 | #define CONFIG_SYS_DTT_LOW_TEMP -30 | |
72 | #define CONFIG_SYS_DTT_HYSTERESIS 3*/ | |
73 | ||
74 | ||
75 | /* | |
76 | * Network Settings | |
77 | */ | |
78 | #define ADI_CMDS_NETWORK 1 | |
446707c9 VY |
79 | #define CONFIG_CMD_NET |
80 | #define CONFIG_CMD_MII | |
81 | #define CONFIG_CMD_DATE | |
82 | #define CONFIG_CMD_DTT | |
83 | ||
84 | #if defined(CONFIG_CMD_NET) | |
85 | ||
86 | #define CONFIG_SMC911X 1 | |
87 | #define CONFIG_SMC911X_32_BIT | |
88 | /* #define CONFIG_SMC911X_16_BIT */ | |
89 | #define CONFIG_SMC911X_BASE 0x28000000 | |
90 | ||
91 | #endif /* (CONFIG_CMD_NET) */ | |
92 | ||
93 | #define CONFIG_HOSTNAME bf561-acvilon | |
94 | ||
95 | /* Uncomment next line to use fixed MAC address */ | |
96 | /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ | |
97 | ||
98 | ||
99 | /* | |
100 | * Flash Settings | |
101 | */ | |
102 | #define CONFIG_SYS_NO_FLASH | |
103 | ||
104 | ||
105 | /* | |
106 | * I2C Settings | |
107 | */ | |
108 | #define CONFIG_HARD_I2C | |
109 | /* Use 300kHz speed by default */ | |
110 | #define CONFIG_SYS_I2C_SPEED 0x00 | |
111 | #define CONFIG_PCA9564_I2C | |
112 | #define CONFIG_PCA9564_BASE 0x2c000000 | |
113 | ||
114 | ||
115 | /* | |
116 | * SPI Settings | |
117 | */ | |
118 | #define CONFIG_BFIN_SPI | |
119 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
120 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
121 | #define CONFIG_SPI_FLASH | |
122 | #define CONFIG_SPI_FLASH_ATMEL | |
123 | ||
124 | ||
125 | /* | |
126 | * Env Storage Settings | |
127 | */ | |
128 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
129 | /* #define CONFIG_CMD_SAVEENV */ | |
130 | #define CONFIG_ENV_SECT_SIZE (1056 * 8) | |
131 | #define CONFIG_ENV_OFFSET ((16 + 256) * 1056) | |
132 | #define CONFIG_ENV_SIZE (8 * 1056) | |
446707c9 VY |
133 | |
134 | ||
135 | /* | |
136 | * NAND Settings | |
137 | * We're using NAND_PLAT driver to make things simplier | |
138 | */ | |
139 | #define CONFIG_NAND_PLAT | |
140 | #define CONFIG_CMD_NAND | |
141 | #define CONFIG_SYS_NAND_BASE 0x24000000 | |
142 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
143 | ||
144 | #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) | |
145 | #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3)) | |
446707c9 VY |
146 | #define BFIN_NAND_WRITE(addr, cmd) \ |
147 | do { \ | |
148 | bfin_write8(addr, cmd); \ | |
149 | SSYNC(); \ | |
150 | } while (0) | |
151 | ||
152 | #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) | |
153 | #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) | |
67ceefa7 | 154 | #define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 |
446707c9 VY |
155 | |
156 | ||
157 | /* | |
158 | * Misc Settings | |
159 | */ | |
160 | #define CONFIG_UART_CONSOLE 0 | |
161 | #define CONFIG_BAUDRATE 57600 | |
162 | #define CONFIG_SYS_PROMPT "Acvilon> " | |
446707c9 VY |
163 | |
164 | /* | |
165 | * Pull in common ADI header for remaining command/environment setup | |
166 | */ | |
167 | #include <configs/bfin_adi_common.h> | |
168 | ||
169 | #endif /* __CONFIG_BF561_ACVILON_H__ */ |