[people/ms/u-boot.git] / include / configs / bluestone.h

/*
 * bluestone.h - configuration for Bluestone (APM821XX)
 *
 * Copyright (c) 2010, Applied Micro Circuits Corporation
 * Author: Tirumala R Marri <tmarri@apm.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_APM821XX		1	/* APM821XX series    */
#define CONFIG_HOSTNAME		bluestone

#define CONFIG_440		1

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xFFFA0000
#endif

/*
 * Include common defines/options for all AMCC eval boards
 */
#include "amcc-common.h"
#define CONFIG_SYS_CLK_FREQ	50000000

#define CONFIG_BOARD_TYPES		1	/* support board types */
#define CONFIG_BOARD_EARLY_INIT_F	1       /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R		1       /* Call misc_init_r */

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
/* EBC stuff */
/* later mapped to this addr */
#define CONFIG_SYS_FLASH_BASE		0xFFF00000
#define CONFIG_SYS_FLASH_SIZE		(4 << 20)	/* 1MB usable */

/* EBC Boot Space: 0xFF000000 */
#define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000
#define CONFIG_SYS_OCM_BASE		0xE3000000 /* OCM: 32k             */
#define CONFIG_SYS_SRAM_BASE		0xE8000000 /* SRAM: 256k           */
#define CONFIG_SYS_AHB_BASE		0xE2000000 /* internal AHB peripherals*/

#define CONFIG_SYS_SRAM_SIZE            (256 << 10)
/*
 * Initial RAM & stack pointer (placed in OCM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM    */
#define CONFIG_SYS_INIT_RAM_SIZE		(4 << 10)
#define CONFIG_SYS_GBL_DATA_OFFSET	\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * Environment
 */
/*
 * Define here the location of the environment variables (FLASH).
 */
#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */

/*
 * FLASH related
 */
#define CONFIG_SYS_FLASH_CFI	/* The flash is CFI compatible  */
#define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver        */
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
/* max number of memory banks           */
#define CONFIG_SYS_MAX_FLASH_BANKS	1
/* max number of sectors on one chip    */
#define CONFIG_SYS_MAX_FLASH_SECT	80
/* Timeout for Flash Erase (in ms)      */
#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
/* Timeout for Flash Write (in ms)      */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500
/* use buffered writes (20x faster)     */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
/* print 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_EMPTY_INFO
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector  */
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector   */
/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
#endif /* CONFIG_ENV_IS_IN_FLASH */

/* SDRAM */
#define CONFIG_SPD_EEPROM	1       /* Use SPD EEPROM for setup     */
#define SPD_EEPROM_ADDRESS	{0x53, 0x51}	/* SPD i2c spd addresses */
#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration */
#define CONFIG_AUTOCALIB	"silent\0"	/* default is non-verbose    */
#define CONFIG_DDR_ECC		1	/* with ECC support             */

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX	1	/* Use UART0			*/

/*
 * I2C
 */
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5	/* Data sheet */

/* I2C bootstrap EEPROM */
#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x52
#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
#define CONFIG_4xx_CONFIG_BLOCKSIZE		16

/*
 * Ethernet
 */
#define CONFIG_IBM_EMAC4_V4	1
#define CONFIG_EMAC_PHY_MODE	EMAC_PHY_MODE_NONE_RGMII
#define CONFIG_HAS_ETH0
/* PHY address, See schematics  */
#define CONFIG_PHY_ADDR			0x1f
/* reset phy upon startup       */
#define CONFIG_PHY_RESET		1
/* Include GbE speed/duplex detection */
#define CONFIG_PHY_GIGE			1
#define CONFIG_PHY_DYNAMIC_ANEG		1

/*
 * External Bus Controller (EBC) Setup
 **/
#define CONFIG_SYS_EBC_CFG	(EBC_CFG_LE_LOCK    |	\
				 EBC_CFG_PTD_ENABLE   |	\
				 EBC_CFG_RTC_2048PERCLK | \
				 EBC_CFG_ATC_HI | \
				 EBC_CFG_DTC_HI | \
				 EBC_CFG_CTC_HI | \
				 EBC_CFG_OEO_PREVIOUS)
/* NOR Flash */
#define CONFIG_SYS_EBC_PB0AP 	(EBC_BXAP_BME_DISABLED   | \
				EBC_BXAP_TWT_ENCODE(64)  | \
				EBC_BXAP_BCE_DISABLE    | \
				EBC_BXAP_BCT_2TRANS     | \
				EBC_BXAP_CSN_ENCODE(1)  | \
				EBC_BXAP_OEN_ENCODE(2)  | \
				EBC_BXAP_WBN_ENCODE(2)  | \
				EBC_BXAP_WBF_ENCODE(2)  | \
				EBC_BXAP_TH_ENCODE(7)   | \
				EBC_BXAP_SOR_DELAYED    | \
				EBC_BXAP_BEM_WRITEONLY  | \
				EBC_BXAP_PEN_DISABLED)
/* Peripheral Bank Configuration Register - EBC_BxCR */
#define CONFIG_SYS_EBC_PB0CR	\
			(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
			EBC_BXCR_BS_1MB                | \
			EBC_BXCR_BU_RW                  | \
			EBC_BXCR_BW_8BIT)


#endif /* __CONFIG_H */
Commit	Line	Data
d0e6665a TM	1	/*
	2	* bluestone.h - configuration for Bluestone (APM821XX)
	3	*
	4	* Copyright (c) 2010, Applied Micro Circuits Corporation
	5	* Author: Tirumala R Marri <tmarri@apm.com>
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d0e6665a TM	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
	13	/*
	14	* High Level Configuration Options
	15	*/
	16	#define CONFIG_APM821XX 1 /* APM821XX series */
	17	#define CONFIG_HOSTNAME bluestone
	18
d0e6665a	19	#define CONFIG_440 1
2ae18241 WD	20
	21	#ifndef CONFIG_SYS_TEXT_BASE
	22	#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
	23	#endif
	24
d0e6665a TM	25	/*
	26	* Include common defines/options for all AMCC eval boards
	27	*/
	28	#include "amcc-common.h"
	29	#define CONFIG_SYS_CLK_FREQ 50000000
	30
	31	#define CONFIG_BOARD_TYPES 1 /* support board types */
	32	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	33	#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
	34
	35	/*
	36	* Base addresses -- Note these are effective addresses where the
	37	* actual resources get mapped (not physical addresses)
	38	*/
	39	/* EBC stuff */
	40	/* later mapped to this addr */
	41	#define CONFIG_SYS_FLASH_BASE 0xFFF00000
	42	#define CONFIG_SYS_FLASH_SIZE (4 << 20) /* 1MB usable */
	43
	44	/* EBC Boot Space: 0xFF000000 */
	45	#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000
	46	#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 32k */
	47	#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
	48	#define CONFIG_SYS_AHB_BASE 0xE2000000 /* internal AHB peripherals*/
	49
	50	#define CONFIG_SYS_SRAM_SIZE (256 << 10)
	51	/*
	52	* Initial RAM & stack pointer (placed in OCM)
	53	*/
	54	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
553f0982	55	#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
d0e6665a	56	#define CONFIG_SYS_GBL_DATA_OFFSET \
25ddd1fb	57	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
d0e6665a TM	58	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	59
	60	/*
	61	* Environment
	62	*/
	63	/*
	64	* Define here the location of the environment variables (FLASH).
	65	*/
	66	#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
	67
	68	/*
	69	* FLASH related
	70	*/
	71	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
	72	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	73	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
	74	#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
	75	/* max number of memory banks */
	76	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	77	/* max number of sectors on one chip */
	78	#define CONFIG_SYS_MAX_FLASH_SECT 80
	79	/* Timeout for Flash Erase (in ms) */
	80	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
	81	/* Timeout for Flash Write (in ms) */
	82	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	83	/* use buffered writes (20x faster) */
	84	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
	85	/* print 'E' for empty sector on flinfo */
	86	#define CONFIG_SYS_FLASH_EMPTY_INFO
	87	#ifdef CONFIG_ENV_IS_IN_FLASH
	88	#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
	89	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
	90	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
	91	/* Address and size of Redundant Environment Sector */
	92	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
	93	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	94	#endif /* CONFIG_ENV_IS_IN_FLASH */
	95
	96	/* SDRAM */
	97	#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
	98	#define SPD_EEPROM_ADDRESS {0x53, 0x51} /* SPD i2c spd addresses */
	99	#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
	100	#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
	101	#define CONFIG_DDR_ECC 1 /* with ECC support */
	102
	103	/*
	104	* Serial Port
	105	*/
	106	#define CONFIG_CONS_INDEX 1 /* Use UART0 */
	107
	108	/*
	109	* I2C
	110	*/
880540de	111	#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
d0e6665a TM	112	#define CONFIG_SYS_I2C_MULTI_EEPROMS
	113	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	114	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	115	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	116	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* Data sheet */
	117
	118	/* I2C bootstrap EEPROM */
	119	#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
	120	#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
	121	#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
	122
	123	/*
	124	* Ethernet
	125	*/
	126	#define CONFIG_IBM_EMAC4_V4 1
	127	#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_NONE_RGMII
	128	#define CONFIG_HAS_ETH0
	129	/* PHY address, See schematics */
	130	#define CONFIG_PHY_ADDR 0x1f
	131	/* reset phy upon startup */
	132	#define CONFIG_PHY_RESET 1
	133	/* Include GbE speed/duplex detection */
	134	#define CONFIG_PHY_GIGE 1
	135	#define CONFIG_PHY_DYNAMIC_ANEG 1
	136
	137	/*
	138	* External Bus Controller (EBC) Setup
	139	**/
	140	#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_LOCK \| \
	141	EBC_CFG_PTD_ENABLE \| \
	142	EBC_CFG_RTC_2048PERCLK \| \
	143	EBC_CFG_ATC_HI \| \
	144	EBC_CFG_DTC_HI \| \
	145	EBC_CFG_CTC_HI \| \
	146	EBC_CFG_OEO_PREVIOUS)
	147	/* NOR Flash */
	148	#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED \| \
	149	EBC_BXAP_TWT_ENCODE(64) \| \
	150	EBC_BXAP_BCE_DISABLE \| \
	151	EBC_BXAP_BCT_2TRANS \| \
	152	EBC_BXAP_CSN_ENCODE(1) \| \
	153	EBC_BXAP_OEN_ENCODE(2) \| \
	154	EBC_BXAP_WBN_ENCODE(2) \| \
	155	EBC_BXAP_WBF_ENCODE(2) \| \
	156	EBC_BXAP_TH_ENCODE(7) \| \
	157	EBC_BXAP_SOR_DELAYED \| \
	158	EBC_BXAP_BEM_WRITEONLY \| \
	159	EBC_BXAP_PEN_DISABLED)
	160	/* Peripheral Bank Configuration Register - EBC_BxCR */
	161	#define CONFIG_SYS_EBC_PB0CR \
	162	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) \| \
	163	EBC_BXCR_BS_1MB \| \
	164	EBC_BXCR_BU_RW \| \
	165	EBC_BXCR_BW_8BIT)
	166
	167
	168	#endif /* __CONFIG_H */