[people/ms/u-boot.git] / include / configs / cgtqmx6eval.h

/*
 *
 * Congatec Conga-QEVAl board configuration file.
 *
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 * Based on Freescale i.MX6Q Sabre Lite board configuration file.
 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
 * Leo Sartre, <lsartre@adeneo-embedded.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CGTQMX6EVAL_H
#define __CONFIG_CGTQMX6EVAL_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4122

#ifdef CONFIG_SPL
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#define CONFIG_SPL_SPI_LOAD
#include "imx6_spl.h"
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_MISC_INIT_R

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* SPI NOR */
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)

/* Thermal support */
#define CONFIG_IMX_THERMAL

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED		  100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI

/* SATA */
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* Ethernet */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHY_ATHEROS

/* Command definition */

#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONSOLE_DEV	"ttymxc1"
#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdtfile=undefined\0" \
	"fdt_addr_r=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	"dfu_alt_info_spl=spl raw 0x400\0" \
	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	"dfu_alt_info=spl raw 0x400\0" \
	"bootm_size=0x10000000\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"findfdt="\
		"if test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-qmx6.dtb; fi; " \
		"if test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\

#define CONFIG_BOOTCOMMAND \
	"run spilock;"	    \
	"run findfdt; "	\
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#if defined (CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#endif			       /* __CONFIG_CGTQMX6EVAL_H */
Commit	Line	Data
9b75bad0 SL	1	/*
	2	*
	3	* Congatec Conga-QEVAl board configuration file.
	4	*
	5	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	6	* Based on Freescale i.MX6Q Sabre Lite board configuration file.
	7	* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
	8	* Leo Sartre, <lsartre@adeneo-embedded.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
9b75bad0 SL	11	*/
	12
	13	#ifndef __CONFIG_CGTQMX6EVAL_H
	14	#define __CONFIG_CGTQMX6EVAL_H
	15
9b75bad0 SL	16	#include "mx6_common.h"
9b75bad0 SL	17
9b75bad0 SL	18	#define CONFIG_MACH_TYPE 4122
9b75bad0 SL	19
d7140351	20	#ifdef CONFIG_SPL
d7140351 OS	21	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	22	#define CONFIG_SPL_SPI_LOAD
	23	#include "imx6_spl.h"
	24	#endif
	25
9b75bad0 SL	26	/* Size of malloc() pool */
	27	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	28
9b75bad0	29	#define CONFIG_MISC_INIT_R
9b75bad0 SL	30
	31	#define CONFIG_MXC_UART
	32	#define CONFIG_MXC_UART_BASE UART2_BASE
	33
	34	/* MMC Configs */
9b75bad0 SL	35	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
9b75bad0 SL	36
71bcdafe	37	/* SPI NOR */
71bcdafe OS	38	#define CONFIG_SPI_FLASH
	39	#define CONFIG_SPI_FLASH_STMICRO
	40	#define CONFIG_SPI_FLASH_SST
	41	#define CONFIG_MXC_SPI
	42	#define CONFIG_SF_DEFAULT_BUS 0
	43	#define CONFIG_SF_DEFAULT_SPEED 20000000
	44	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	45
862187b7	46	/* Thermal support */
1368f993	47	#define CONFIG_IMX_THERMAL
862187b7	48
4c9929d6	49	/* I2C Configs */
4c9929d6 OS	50	#define CONFIG_SYS_I2C
4c9929d6 OS	51	#define CONFIG_SYS_I2C_MXC
03544c66 AA	52	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	53	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
4c9929d6 OS	54	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	55	#define CONFIG_SYS_I2C_SPEED 100000
	56
	57	/* PMIC */
	58	#define CONFIG_POWER
	59	#define CONFIG_POWER_I2C
	60	#define CONFIG_POWER_PFUZE100
	61	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	62
95246ac7	63	/* USB Configs */
95246ac7	64	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
95246ac7 OS	65	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	66	#define CONFIG_MXC_USB_FLAGS 0
	67	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
95246ac7	68
3e08e1b7	69	#define CONFIG_USBD_HS
3e08e1b7	70
3e08e1b7	71	#define CONFIG_USB_FUNCTION_MASS_STORAGE
3e08e1b7	72
6d551f27	73	/* Framebuffer */
6d551f27	74	#define CONFIG_VIDEO_IPUV3
6d551f27 OS	75	#define CONFIG_VIDEO_BMP_RLE8
	76	#define CONFIG_SPLASH_SCREEN
	77	#define CONFIG_SPLASH_SCREEN_ALIGN
	78	#define CONFIG_BMP_16BPP
	79	#define CONFIG_VIDEO_LOGO
	80	#define CONFIG_VIDEO_BMP_LOGO
6d551f27 OS	81	#define CONFIG_IMX_HDMI
6d551f27 OS	82
6731bc8d	83	/* SATA */
6731bc8d OS	84	#define CONFIG_DWC_AHSATA
	85	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	86	#define CONFIG_DWC_AHSATA_PORT_ID 0
	87	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	88	#define CONFIG_LBA48
	89	#define CONFIG_LIBATA
	90
f0222902	91	/* Ethernet */
f0222902 OS	92	#define CONFIG_FEC_MXC
	93	#define CONFIG_MII
	94	#define IMX_FEC_BASE ENET_BASE_ADDR
	95	#define CONFIG_FEC_XCV_TYPE RGMII
	96	#define CONFIG_ETHPRIME "FEC"
	97	#define CONFIG_FEC_MXC_PHYADDR 6
f0222902 OS	98	#define CONFIG_PHY_ATHEROS
f0222902 OS	99
5b94ce2c OS	100	/* Command definition */
	101
	102	#define CONFIG_MXC_UART_BASE UART2_BASE
12ca05a3	103	#define CONSOLE_DEV "ttymxc1"
5b94ce2c OS	104	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
5b94ce2c OS	105	#define CONFIG_SYS_MMC_ENV_DEV 0
9b75bad0	106
d7140351	107	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
9b75bad0 SL	108	#define CONFIG_EXTRA_ENV_SETTINGS \
9b75bad0 SL	109	"script=boot.scr\0" \
4ac0c2bf	110	"image=zImage\0" \
d7140351	111	"fdtfile=undefined\0" \
5b94ce2c	112	"fdt_addr_r=0x18000000\0" \
9b75bad0	113	"boot_fdt=try\0" \
5b94ce2c	114	"ip_dyn=yes\0" \
12ca05a3	115	"console=" CONSOLE_DEV "\0" \
e0a352d1 OS	116	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	117	"dfu_alt_info_spl=spl raw 0x400\0" \
	118	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	119	"dfu_alt_info=spl raw 0x400\0" \
5b94ce2c OS	120	"bootm_size=0x10000000\0" \
5b94ce2c OS	121	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
9b75bad0	122	"mmcpart=1\0" \
5b94ce2c OS	123	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	124	"update_sd_firmware=" \
	125	"if test ${ip_dyn} = yes; then " \
	126	"setenv get_cmd dhcp; " \
	127	"else " \
	128	"setenv get_cmd tftp; " \
	129	"fi; " \
	130	"if mmc dev ${mmcdev}; then " \
	131	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	132	"setexpr fw_sz ${filesize} / 0x200; " \
	133	"setexpr fw_sz ${fw_sz} + 1; " \
	134	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	135	"fi; " \
	136	"fi\0" \
9b75bad0 SL	137	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	138	"root=${mmcroot}\0" \
	139	"loadbootscript=" \
5b94ce2c	140	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
9b75bad0 SL	141	"bootscript=echo Running bootscript from mmc ...; " \
9b75bad0 SL	142	"source\0" \
5b94ce2c OS	143	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
5b94ce2c OS	144	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
9b75bad0 SL	145	"mmcboot=echo Booting from mmc ...; " \
	146	"run mmcargs; " \
	147	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	148	"if run loadfdt; then " \
5b94ce2c OS	149	"bootz ${loadaddr} - ${fdt_addr_r}; " \
	150	"else " \
	151	"if test ${boot_fdt} = try; then " \
	152	"bootz; " \
	153	"else " \
	154	"echo WARN: Cannot load the DT; " \
	155	"fi; " \
	156	"fi; " \
	157	"else " \
	158	"bootz; " \
	159	"fi;\0" \
d7140351 OS	160	"findfdt="\
	161	"if test $board_rev = MX6Q ; then " \
	162	"setenv fdtfile imx6q-qmx6.dtb; fi; " \
	163	"if test $board_rev = MX6DL ; then " \
	164	"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
	165	"if test $fdtfile = undefined; then " \
	166	"echo WARNING: Could not determine dtb to use; fi; \0" \
5b94ce2c OS	167	"netargs=setenv bootargs console=${console},${baudrate} " \
	168	"root=/dev/nfs " \
	169	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	170	"netboot=echo Booting from net ...; " \
	171	"run netargs; " \
	172	"if test ${ip_dyn} = yes; then " \
	173	"setenv get_cmd dhcp; " \
	174	"else " \
	175	"setenv get_cmd tftp; " \
	176	"fi; " \
	177	"${get_cmd} ${image}; " \
	178	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	179	"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
	180	"bootz ${loadaddr} - ${fdt_addr_r}; " \
9b75bad0 SL	181	"else " \
9b75bad0 SL	182	"if test ${boot_fdt} = try; then " \
4ac0c2bf	183	"bootz; " \
9b75bad0 SL	184	"else " \
	185	"echo WARN: Cannot load the DT; " \
	186	"fi; " \
	187	"fi; " \
	188	"else " \
4ac0c2bf	189	"bootz; " \
5b94ce2c	190	"fi;\0" \
71bcdafe	191	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
9b75bad0 SL	192
9b75bad0 SL	193	#define CONFIG_BOOTCOMMAND \
71bcdafe	194	"run spilock;" \
d7140351	195	"run findfdt; " \
5b94ce2c OS	196	"mmc dev ${mmcdev};" \
	197	"if mmc rescan; then " \
	198	"if run loadbootscript; then " \
	199	"run bootscript; " \
	200	"else " \
	201	"if run loadimage; then " \
	202	"run mmcboot; " \
	203	"else run netboot; " \
	204	"fi; " \
	205	"fi; " \
	206	"else run netboot; fi"
9b75bad0	207
9b75bad0 SL	208	#define CONFIG_SYS_MEMTEST_START 0x10000000
	209	#define CONFIG_SYS_MEMTEST_END 0x10010000
	210	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	211
9b75bad0 SL	212	/* Physical Memory Map */
	213	#define CONFIG_NR_DRAM_BANKS 1
	214	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
9b75bad0 SL	215
	216	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	217	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	218	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	219
	220	#define CONFIG_SYS_INIT_SP_OFFSET \
	221	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	222	#define CONFIG_SYS_INIT_SP_ADDR \
	223	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	224
056845c2	225	/* Environment organization */
d5de9108	226	#if defined (CONFIG_ENV_IS_IN_MMC)
9b75bad0 SL	227	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
9b75bad0 SL	228	#define CONFIG_SYS_MMC_ENV_DEV 0
d5de9108 OS	229	#endif
	230
	231	#define CONFIG_ENV_SIZE (8 * 1024)
	232
d5de9108 OS	233	#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	234	#define CONFIG_ENV_OFFSET (768 * 1024)
	235	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	236	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	237	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	238	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	239	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	240	#endif
9b75bad0	241
9b75bad0	242	#endif /* __CONFIG_CGTQMX6EVAL_H */