[thirdparty/u-boot.git] / include / configs / cgtqmx6eval.h

/*
 *
 * Congatec Conga-QEVAl board configuration file.
 *
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 * Based on Freescale i.MX6Q Sabre Lite board configuration file.
 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
 * Leo Sartre, <lsartre@adeneo-embedded.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CGTQMX6EVAL_H
#define __CONFIG_CGTQMX6EVAL_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4122

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE

/* Thermal support */
#define CONFIG_IMX6_THERMAL

#define CONFIG_CMD_FUSE
#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
#define CONFIG_MXC_OCOTP
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED		  100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_MX6DL
#define CONFIG_IPUV3_CLK 198000000
#else
#define CONFIG_IPUV3_CLK 264000000
#endif
#define CONFIG_IMX_HDMI

/* SATA */
#define CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* Command definition */

#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONFIG_CONSOLE_DEV	"ttymxc1"
#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdtfile=imx6q-qmx6.dtb\0" \
	"fdt_addr_r=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"bootm_size=0x10000000\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			       (1u * 1024 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif			       /* __CONFIG_CGTQMX6EVAL_H */
Commit	Line	Data
9b75bad0 SL	1	/*
	2	*
	3	* Congatec Conga-QEVAl board configuration file.
	4	*
	5	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	6	* Based on Freescale i.MX6Q Sabre Lite board configuration file.
	7	* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
	8	* Leo Sartre, <lsartre@adeneo-embedded.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
9b75bad0 SL	11	*/
	12
	13	#ifndef __CONFIG_CGTQMX6EVAL_H
	14	#define __CONFIG_CGTQMX6EVAL_H
	15
9b75bad0 SL	16	#include "mx6_common.h"
9b75bad0 SL	17
9b75bad0 SL	18	#define CONFIG_MACH_TYPE 4122
9b75bad0 SL	19
9b75bad0 SL	20	/* Size of malloc() pool */
	21	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	22
	23	#define CONFIG_BOARD_EARLY_INIT_F
	24	#define CONFIG_MISC_INIT_R
9b75bad0 SL	25
	26	#define CONFIG_MXC_UART
	27	#define CONFIG_MXC_UART_BASE UART2_BASE
	28
	29	/* MMC Configs */
9b75bad0 SL	30	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
9b75bad0 SL	31
9b75bad0 SL	32	/* Miscellaneous commands */
	33	#define CONFIG_CMD_BMODE
	34
862187b7 OS	35	/* Thermal support */
	36	#define CONFIG_IMX6_THERMAL
	37
	38	#define CONFIG_CMD_FUSE
	39	#if defined(CONFIG_CMD_FUSE) \|\| defined(CONFIG_IMX6_THERMAL)
	40	#define CONFIG_MXC_OCOTP
	41	#endif
	42
4c9929d6 OS	43	/* I2C Configs */
	44	#define CONFIG_CMD_I2C
	45	#define CONFIG_SYS_I2C
	46	#define CONFIG_SYS_I2C_MXC
	47	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	48	#define CONFIG_SYS_I2C_SPEED 100000
	49
	50	/* PMIC */
	51	#define CONFIG_POWER
	52	#define CONFIG_POWER_I2C
	53	#define CONFIG_POWER_PFUZE100
	54	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	55
95246ac7 OS	56	/* USB Configs */
	57	#define CONFIG_CMD_USB
	58	#define CONFIG_CMD_FAT
	59	#define CONFIG_USB_EHCI
	60	#define CONFIG_USB_EHCI_MX6
	61	#define CONFIG_USB_STORAGE
	62	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	63	#define CONFIG_USB_HOST_ETHER
	64	#define CONFIG_USB_ETHER_ASIX
	65	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	66	#define CONFIG_MXC_USB_FLAGS 0
	67	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
	68	#define CONFIG_USB_KEYBOARD
	69	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	70
6d551f27 OS	71	/* Framebuffer */
	72	#define CONFIG_VIDEO
	73	#define CONFIG_VIDEO_IPUV3
	74	#define CONFIG_CFB_CONSOLE
	75	#define CONFIG_VGA_AS_SINGLE_DEVICE
	76	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	77	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	78	#define CONFIG_VIDEO_BMP_RLE8
	79	#define CONFIG_SPLASH_SCREEN
	80	#define CONFIG_SPLASH_SCREEN_ALIGN
	81	#define CONFIG_BMP_16BPP
	82	#define CONFIG_VIDEO_LOGO
	83	#define CONFIG_VIDEO_BMP_LOGO
	84	#ifdef CONFIG_MX6DL
	85	#define CONFIG_IPUV3_CLK 198000000
	86	#else
	87	#define CONFIG_IPUV3_CLK 264000000
	88	#endif
	89	#define CONFIG_IMX_HDMI
	90
6731bc8d OS	91	/* SATA */
	92	#define CONFIG_CMD_SATA
	93	#define CONFIG_DWC_AHSATA
	94	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	95	#define CONFIG_DWC_AHSATA_PORT_ID 0
	96	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	97	#define CONFIG_LBA48
	98	#define CONFIG_LIBATA
	99
5b94ce2c OS	100	/* Command definition */
	101
	102	#define CONFIG_MXC_UART_BASE UART2_BASE
	103	#define CONFIG_CONSOLE_DEV "ttymxc1"
	104	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
	105	#define CONFIG_SYS_MMC_ENV_DEV 0
9b75bad0 SL	106
	107	#define CONFIG_EXTRA_ENV_SETTINGS \
	108	"script=boot.scr\0" \
4ac0c2bf	109	"image=zImage\0" \
5b94ce2c OS	110	"fdtfile=imx6q-qmx6.dtb\0" \
5b94ce2c OS	111	"fdt_addr_r=0x18000000\0" \
9b75bad0	112	"boot_fdt=try\0" \
5b94ce2c OS	113	"ip_dyn=yes\0" \
	114	"console=" CONFIG_CONSOLE_DEV "\0" \
	115	"bootm_size=0x10000000\0" \
	116	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
9b75bad0	117	"mmcpart=1\0" \
5b94ce2c OS	118	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	119	"update_sd_firmware=" \
	120	"if test ${ip_dyn} = yes; then " \
	121	"setenv get_cmd dhcp; " \
	122	"else " \
	123	"setenv get_cmd tftp; " \
	124	"fi; " \
	125	"if mmc dev ${mmcdev}; then " \
	126	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	127	"setexpr fw_sz ${filesize} / 0x200; " \
	128	"setexpr fw_sz ${fw_sz} + 1; " \
	129	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	130	"fi; " \
	131	"fi\0" \
9b75bad0 SL	132	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	133	"root=${mmcroot}\0" \
	134	"loadbootscript=" \
5b94ce2c	135	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
9b75bad0 SL	136	"bootscript=echo Running bootscript from mmc ...; " \
9b75bad0 SL	137	"source\0" \
5b94ce2c OS	138	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
5b94ce2c OS	139	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
9b75bad0 SL	140	"mmcboot=echo Booting from mmc ...; " \
	141	"run mmcargs; " \
	142	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	143	"if run loadfdt; then " \
5b94ce2c OS	144	"bootz ${loadaddr} - ${fdt_addr_r}; " \
	145	"else " \
	146	"if test ${boot_fdt} = try; then " \
	147	"bootz; " \
	148	"else " \
	149	"echo WARN: Cannot load the DT; " \
	150	"fi; " \
	151	"fi; " \
	152	"else " \
	153	"bootz; " \
	154	"fi;\0" \
	155	"netargs=setenv bootargs console=${console},${baudrate} " \
	156	"root=/dev/nfs " \
	157	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	158	"netboot=echo Booting from net ...; " \
	159	"run netargs; " \
	160	"if test ${ip_dyn} = yes; then " \
	161	"setenv get_cmd dhcp; " \
	162	"else " \
	163	"setenv get_cmd tftp; " \
	164	"fi; " \
	165	"${get_cmd} ${image}; " \
	166	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	167	"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
	168	"bootz ${loadaddr} - ${fdt_addr_r}; " \
9b75bad0 SL	169	"else " \
9b75bad0 SL	170	"if test ${boot_fdt} = try; then " \
4ac0c2bf	171	"bootz; " \
9b75bad0 SL	172	"else " \
	173	"echo WARN: Cannot load the DT; " \
	174	"fi; " \
	175	"fi; " \
	176	"else " \
4ac0c2bf	177	"bootz; " \
5b94ce2c	178	"fi;\0" \
9b75bad0 SL	179
9b75bad0 SL	180	#define CONFIG_BOOTCOMMAND \
5b94ce2c OS	181	"mmc dev ${mmcdev};" \
	182	"if mmc rescan; then " \
	183	"if run loadbootscript; then " \
	184	"run bootscript; " \
	185	"else " \
	186	"if run loadimage; then " \
	187	"run mmcboot; " \
	188	"else run netboot; " \
	189	"fi; " \
	190	"fi; " \
	191	"else run netboot; fi"
9b75bad0	192
9b75bad0 SL	193	#define CONFIG_SYS_MEMTEST_START 0x10000000
	194	#define CONFIG_SYS_MEMTEST_END 0x10010000
	195	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	196
9b75bad0 SL	197	/* Physical Memory Map */
	198	#define CONFIG_NR_DRAM_BANKS 1
	199	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	200	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	201
	202	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	203	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	204	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	205
	206	#define CONFIG_SYS_INIT_SP_OFFSET \
	207	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	208	#define CONFIG_SYS_INIT_SP_ADDR \
	209	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	210
056845c2	211	/* Environment organization */
9b75bad0 SL	212	#define CONFIG_ENV_SIZE (8 * 1024)
	213
	214	#define CONFIG_ENV_IS_IN_MMC
	215
	216	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	217	#define CONFIG_SYS_MMC_ENV_DEV 0
	218
9b75bad0	219	#endif /* __CONFIG_CGTQMX6EVAL_H */