[thirdparty/u-boot.git] / include / configs / cl-som-am57x.h

/*
 * Configuration settings for CompuLab CL-SOM-AM57x board
 *
 * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
 *
 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CL_SOM_AM57X_H
#define __CONFIG_CL_SOM_AM57X_H

#define CONFIG_NR_DRAM_BANKS		2

#define CONSOLEDEV			"ttyO2"
#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
#define CONFIG_CONS_INDEX		3

#define CONFIG_SYS_OMAP_ABE_SYSCK

#include <configs/ti_omap5_common.h>

/* misc */
#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG

/* PMIC I2C bus number */
#define CONFIG_SYS_SPD_BUS_NUM 3

/* SPI Flash support */
#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED		48000000
#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3

/* SPI SPL defines */
/* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD

/* SD/MMC RAW/FS boot */
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1

/* Environment */
#define CONFIG_ENV_SIZE			(16 << 10) /* 16 KiB env size */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SPI_MAX_HZ		48000000

/* EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
#define CONFIG_SYS_I2C_EEPROM_BUS       3

#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_EEPROM_SIZE		256

#ifndef CONFIG_SPL_BUILD
/* SATA */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
						CONFIG_SYS_SCSI_MAX_LUN)
/* PCA9555 GPIO expander support */
#define CONFIG_PCA953X
#define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
#define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }

#endif /* !CONFIG_SPL_BUILD */

/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP

#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST

/* USB Networking options */

/* CPSW Ethernet */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_PHY_ATHEROS
#define CONFIG_SYS_RX_ETH_BUFFER	64
#define PHY_ANEG_TIMEOUT		8000

#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT		10

/* Default environment */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
	DEFAULT_LINUX_BOOT_ENV \
	"autoload=no\0" \
	"baudrate=115200\0" \
	"console=ttyO2,115200n8\0" \
	"bootdelay=3\0" \
	"fdtfile=am57xx-sbc-am57x.dtb\0" \
	"kernel=zImage-cl-som-am57x\0" \
	"bootscr=bootscr.img\0" \
	"displaytype=hdmi\0" \
	"bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
	"emmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
	"emmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
	"load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
		"run mmcloadkernel && run mmcloadfdt\0" \
	"mmcroot=/dev/mmcblk1p2\0" \
	"mmcrootfstype=ext4 rw rootwait\0" \
	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \
		"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
		"echo Running bootscript from MMC/SD Card ... && " \
		"source ${loadaddr}\0" \
	"mmcboot=setenv mmcdev 0 && run load_mmc && " \
		"run mmcargs && echo Booting from MMC/SD Card ... && " \
		"run bootkernel\0" \
	"emmcroot=/dev/mmcblk0p2\0" \
	"emmcrootfstype=ext4 rw rootwait\0" \
	"emmcargs=setenv bootargs console=${console} " \
		"root=${emmcroot} " \
		"rootfstype=${emmcrootfstype}\0" \
	"emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \
		"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
		"echo Running bootscript from eMMC ... && " \
		"source ${loadaddr}\0" \
	"emmcboot=setenv mmcdev 1 && run load_mmc && " \
		"run emmcargs && echo Booting from eMMC ... && " \
		"run bootkernel\0" \
	"sataroot=/dev/sda2\0" \
	"satarootfstype=ext4 rw rootwait\0" \
	"load_sata=load scsi 0 ${loadaddr} ${kernel} && " \
		"load scsi 0 ${fdtaddr} ${fdtfile}\0" \
	"sataargs=setenv bootargs console=${console} " \
		"root=${sataroot} " \
		"rootfstype=${satarootfstype}\0" \
	"satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \
		"echo Running bootscript from SATA ... && " \
		"source ${loadaddr}\0" \
	"sataboot=run load_sata && run sataargs && " \
		"echo Booting from SATA ... && " \
		"run bootkernel\0"

#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND \
	"run mmcbootscript || run mmcboot || " \
	"run satabootscript || run sataboot || " \
	"run emmcbootscript || run emmcboot"


#endif /* __CONFIG_CL_SOM_AM57X_H */
Commit	Line	Data
46650d58 DL	1	/*
	2	* Configuration settings for CompuLab CL-SOM-AM57x board
	3	*
	4	* (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
	5	*
	6	* Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_CL_SOM_AM57X_H
	12	#define __CONFIG_CL_SOM_AM57X_H
	13
46650d58 DL	14	#define CONFIG_NR_DRAM_BANKS 2
	15
	16	#define CONSOLEDEV "ttyO2"
	17	#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
	18	#define CONFIG_CONS_INDEX 3
46650d58 DL	19
	20	#define CONFIG_SYS_OMAP_ABE_SYSCK
	21
	22	#include <configs/ti_omap5_common.h>
	23
965c509f DL	24	/* misc */
	25	#define CONFIG_MISC_INIT_R
	26	#define CONFIG_REVISION_TAG
	27
46650d58 DL	28	/* PMIC I2C bus number */
	29	#define CONFIG_SYS_SPD_BUS_NUM 3
	30
	31	/* SPI Flash support */
46650d58 DL	32	#define CONFIG_TI_SPI_MMAP
	33	#define CONFIG_SF_DEFAULT_SPEED 48000000
	34	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
	35
	36	/* SPI SPL defines */
	37	/* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */
	38	#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
	39	#define CONFIG_SPL_SPI_SUPPORT
	40	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	41	#define CONFIG_SPL_SPI_LOAD
	42
5c291bef UM	43	/* SD/MMC RAW/FS boot */
	44	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	45	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
46650d58 DL	46
	47	/* Environment */
	48	#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB env size */
	49	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	50
46650d58 DL	51	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	52	#define CONFIG_ENV_OFFSET (768 * 1024)
	53	#define CONFIG_ENV_SPI_MAX_HZ 48000000
	54
965c509f DL	55	/* EEPROM */
	56	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	57	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	58	#define CONFIG_SYS_I2C_EEPROM_BUS 3
	59
965c509f DL	60	#define CONFIG_ENV_EEPROM_IS_ON_I2C
	61	#define CONFIG_SYS_EEPROM_SIZE 256
	62
46650d58 DL	63	#ifndef CONFIG_SPL_BUILD
46650d58 DL	64	/* SATA */
46650d58	65	#define CONFIG_LIBATA
46650d58 DL	66	#define CONFIG_SCSI_AHCI_PLAT
	67	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	68	#define CONFIG_SYS_SCSI_MAX_LUN 1
	69	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	70	CONFIG_SYS_SCSI_MAX_LUN)
	71	/* PCA9555 GPIO expander support */
	72	#define CONFIG_PCA953X
46650d58 DL	73	#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
	74	#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
	75
e627290a UM	76	#endif /* !CONFIG_SPL_BUILD */
e627290a UM	77
46650d58 DL	78	/* USB xHCI HOST */
46650d58 DL	79	#define CONFIG_USB_XHCI_OMAP
46650d58 DL	80
	81	#define CONFIG_OMAP_USB_PHY
	82	#define CONFIG_OMAP_USB3PHY1_HOST
	83
	84	/* USB Networking options */
46650d58	85
fc300e2c DL	86	/* CPSW Ethernet */
	87	#define CONFIG_DRIVER_TI_CPSW
	88	#define CONFIG_MII
	89	#define CONFIG_BOOTP_DEFAULT
	90	#define CONFIG_BOOTP_SEND_HOSTNAME
	91	#define CONFIG_BOOTP_GATEWAY
fc300e2c	92	#define CONFIG_PHY_ATHEROS
fc300e2c DL	93	#define CONFIG_SYS_RX_ETH_BUFFER 64
	94	#define PHY_ANEG_TIMEOUT 8000
	95
	96	#define CONFIG_BOOTP_DNS
	97	#define CONFIG_BOOTP_DNS2
	98	#define CONFIG_BOOTP_SUBNETMASK
	99	#define CONFIG_NET_RETRY_COUNT 10
	100
99b02b4d UM	101	/* Default environment */
	102	#undef CONFIG_EXTRA_ENV_SETTINGS
	103	#define CONFIG_EXTRA_ENV_SETTINGS \
	104	DEFAULT_LINUX_BOOT_ENV \
	105	"autoload=no\0" \
	106	"baudrate=115200\0" \
	107	"console=ttyO2,115200n8\0" \
	108	"bootdelay=3\0" \
	109	"fdtfile=am57xx-sbc-am57x.dtb\0" \
	110	"kernel=zImage-cl-som-am57x\0" \
	111	"bootscr=bootscr.img\0" \
	112	"displaytype=hdmi\0" \
	113	"bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
	114	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
	115	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
dbf0518b UM	116	"emmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
dbf0518b UM	117	"emmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
99b02b4d	118	"load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
dbf0518b	119	"run mmcloadkernel && run mmcloadfdt\0" \
99b02b4d UM	120	"mmcroot=/dev/mmcblk1p2\0" \
	121	"mmcrootfstype=ext4 rw rootwait\0" \
	122	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
	123	"rootfstype=${mmcrootfstype}\0" \
	124	"mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \
	125	"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
	126	"echo Running bootscript from MMC/SD Card ... && " \
	127	"source ${loadaddr}\0" \
	128	"mmcboot=setenv mmcdev 0 && run load_mmc && " \
	129	"run mmcargs && echo Booting from MMC/SD Card ... && " \
	130	"run bootkernel\0" \
	131	"emmcroot=/dev/mmcblk0p2\0" \
	132	"emmcrootfstype=ext4 rw rootwait\0" \
	133	"emmcargs=setenv bootargs console=${console} " \
	134	"root=${emmcroot} " \
	135	"rootfstype=${emmcrootfstype}\0" \
	136	"emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \
	137	"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
	138	"echo Running bootscript from eMMC ... && " \
	139	"source ${loadaddr}\0" \
	140	"emmcboot=setenv mmcdev 1 && run load_mmc && " \
	141	"run emmcargs && echo Booting from eMMC ... && " \
	142	"run bootkernel\0" \
	143	"sataroot=/dev/sda2\0" \
	144	"satarootfstype=ext4 rw rootwait\0" \
	145	"load_sata=load scsi 0 ${loadaddr} ${kernel} && " \
	146	"load scsi 0 ${fdtaddr} ${fdtfile}\0" \
	147	"sataargs=setenv bootargs console=${console} " \
	148	"root=${sataroot} " \
	149	"rootfstype=${satarootfstype}\0" \
	150	"satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \
	151	"echo Running bootscript from SATA ... && " \
	152	"source ${loadaddr}\0" \
	153	"sataboot=run load_sata && run sataargs && " \
	154	"echo Booting from SATA ... && " \
dbf0518b	155	"run bootkernel\0"
99b02b4d UM	156
	157	#undef CONFIG_BOOTCOMMAND
	158	#define CONFIG_BOOTCOMMAND \
	159	"run mmcbootscript \|\| run mmcboot \|\| " \
	160	"run satabootscript \|\| run sataboot \|\| " \
	161	"run emmcbootscript \|\| run emmcboot"
	162
	163
46650d58	164	#endif /* __CONFIG_CL_SOM_AM57X_H */