[people/ms/u-boot.git] / include / configs / clearfog.h

/*
 * Copyright (C) 2015 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_CLEARFOG_H
#define _CONFIG_CLEARFOG_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_DB_88F6820_GP		/* Board target name for DDR training */

#define CONFIG_DISPLAY_BOARDINFO_LATE

/*
 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
 * for DDR ECC byte filling in the SPL before loading the main
 * U-Boot into it.
 */
#define	CONFIG_SYS_TEXT_BASE	0x00800000
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_TFTPPUT
#define CONFIG_CMD_TIME

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE		0x0
#define CONFIG_SYS_I2C_SPEED		100000

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
#define CONFIG_SPI_FLASH_STMICRO

/*
 * SDIO/MMC Card Configuration
 */
#define CONFIG_MMC
#define CONFIG_MMC_SDMA
#define CONFIG_GENERIC_MMC
#define CONFIG_SDHCI
#define CONFIG_MV_SDHCI
#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

/* Partition support */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT

/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI

#define CONFIG_ENV_MIN_ENTRIES		128

/* Environment in MMC */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_SECT_SIZE		0x200
#define CONFIG_ENV_SIZE			0x10000
/*
 * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
 * boot image starts @ LBA-0.
 * As result in MMC/eMMC case it will be a 1 sector gap between u-boot
 * image and environment
 */
#define CONFIG_ENV_OFFSET		0xf0000
#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET

#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

/* PCIe support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_PCI
#define CONFIG_PCI_MVEBU
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#endif

#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
#define CONFIG_SYS_ALT_MEMTEST

/* Keep device tree and initrd in lower memory so the kernel can access them */
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"fdt_high=0x10000000\0"		\
	"initrd_high=0x10000000\0"

/* SPL */
/*
 * Select the boot device here
 *
 * Currently supported are:
 * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
 * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
 */
#define SPL_BOOT_SPI_NOR_FLASH		1
#define SPL_BOOT_SDIO_MMC_CARD		2
#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SDIO_MMC_CARD

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_SIZE			(140 << 10)
#define CONFIG_SPL_TEXT_BASE		0x40000030
#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)

#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif

#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT

#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_BUS		0
#define CONFIG_SPL_SPI_CS		0
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
#endif

#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
/* SPL related MMC defines */
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
#define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	((CONFIG_SYS_U_BOOT_OFFS / 512)\
						 + 1)
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	((512 << 10) / 512) /* 512KiB */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
#endif
#endif

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

#endif /* _CONFIG_CLEARFOG_H */
Commit	Line	Data
0299c90f SR	1	/*
	2	* Copyright (C) 2015 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_CLEARFOG_H
	8	#define _CONFIG_CLEARFOG_H
	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
0299c90f SR	13	#define CONFIG_DB_88F6820_GP /* Board target name for DDR training */
	14
	15	#define CONFIG_DISPLAY_BOARDINFO_LATE
	16
	17	/*
	18	* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
	19	* for DDR ECC byte filling in the SPL before loading the main
	20	* U-Boot into it.
	21	*/
	22	#define CONFIG_SYS_TEXT_BASE 0x00800000
	23	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	24
	25	/*
	26	* Commands configuration
	27	*/
	28	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	29	#define CONFIG_CMD_BOOTZ
	30	#define CONFIG_CMD_CACHE
	31	#define CONFIG_CMD_DHCP
	32	#define CONFIG_CMD_ENV
	33	#define CONFIG_CMD_EXT2
	34	#define CONFIG_CMD_EXT4
	35	#define CONFIG_CMD_FAT
	36	#define CONFIG_CMD_FS_GENERIC
	37	#define CONFIG_CMD_I2C
	38	#define CONFIG_CMD_MMC
	39	#define CONFIG_CMD_PCI
	40	#define CONFIG_CMD_PING
	41	#define CONFIG_CMD_SF
	42	#define CONFIG_CMD_SPI
	43	#define CONFIG_CMD_TFTPPUT
	44	#define CONFIG_CMD_TIME
	45
	46	/* I2C */
	47	#define CONFIG_SYS_I2C
	48	#define CONFIG_SYS_I2C_MVTWSI
	49	#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
	50	#define CONFIG_SYS_I2C_SLAVE 0x0
	51	#define CONFIG_SYS_I2C_SPEED 100000
	52
	53	/* SPI NOR flash default params, used by sf commands */
	54	#define CONFIG_SF_DEFAULT_SPEED 1000000
	55	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
	56	#define CONFIG_SPI_FLASH_STMICRO
	57
	58	/*
	59	* SDIO/MMC Card Configuration
	60	*/
	61	#define CONFIG_MMC
	62	#define CONFIG_MMC_SDMA
	63	#define CONFIG_GENERIC_MMC
	64	#define CONFIG_SDHCI
	65	#define CONFIG_MV_SDHCI
	66	#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
	67
	68	/* Partition support */
	69	#define CONFIG_DOS_PARTITION
	70	#define CONFIG_EFI_PARTITION
	71
	72	/* Additional FS support/configuration */
	73	#define CONFIG_SUPPORT_VFAT
	74
	75	/* USB/EHCI configuration */
	76	#define CONFIG_EHCI_IS_TDI
77
78	#define CONFIG_ENV_MIN_ENTRIES 128
79
80	/* Environment in MMC */
81	#define CONFIG_ENV_IS_IN_MMC
82	#define CONFIG_SYS_MMC_ENV_DEV 0
83	#define CONFIG_ENV_SECT_SIZE 0x200
84	#define CONFIG_ENV_SIZE 0x10000
85	/*
86	* For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
87	* boot image starts @ LBA-0.
88	* As result in MMC/eMMC case it will be a 1 sector gap between u-boot
89	* image and environment
90	*/
91	#define CONFIG_ENV_OFFSET 0xf0000
92	#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
93
94	#define CONFIG_PHY_MARVELL /* there is a marvell phy */
95	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
96
97	/* PCIe support */
98	#ifndef CONFIG_SPL_BUILD
99	#define CONFIG_PCI
100	#define CONFIG_PCI_MVEBU
101	#define CONFIG_PCI_PNP
102	#define CONFIG_PCI_SCAN_SHOW
103	#endif
104
105	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
106	#define CONFIG_SYS_ALT_MEMTEST
107
108	/* Keep device tree and initrd in lower memory so the kernel can access them */
109	#define CONFIG_EXTRA_ENV_SETTINGS \
110	"fdt_high=0x10000000\0" \
111	"initrd_high=0x10000000\0"
112
113	/* SPL */
114	/*
115	* Select the boot device here
116	*
117	* Currently supported are:
118	* SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
119	* SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
120	*/
121	#define SPL_BOOT_SPI_NOR_FLASH 1
122	#define SPL_BOOT_SDIO_MMC_CARD 2
123	#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD
124
125	/* Defines for SPL */
126	#define CONFIG_SPL_FRAMEWORK
127	#define CONFIG_SPL_SIZE (140 << 10)
128	#define CONFIG_SPL_TEXT_BASE 0x40000030
129	#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
130
131	#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
132	#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
133
134	#ifdef CONFIG_SPL_BUILD
135	#define CONFIG_SYS_MALLOC_SIMPLE
136	#endif
137
138	#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
139	#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
140
141	#define CONFIG_SPL_LIBCOMMON_SUPPORT
142	#define CONFIG_SPL_LIBGENERIC_SUPPORT
143	#define CONFIG_SPL_SERIAL_SUPPORT
144	#define CONFIG_SPL_I2C_SUPPORT
145
146	#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
147	/* SPL related SPI defines */
148	#define CONFIG_SPL_SPI_SUPPORT
149	#define CONFIG_SPL_SPI_FLASH_SUPPORT
150	#define CONFIG_SPL_SPI_LOAD
151	#define CONFIG_SPL_SPI_BUS 0
152	#define CONFIG_SPL_SPI_CS 0
153	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
154	#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
155	#endif
156
157	#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
158	/* SPL related MMC defines */
159	#define CONFIG_SPL_MMC_SUPPORT
160	#define CONFIG_SPL_LIBDISK_SUPPORT
161	#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
162	#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
163	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\
164	+ 1)
165	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */
166	#ifdef CONFIG_SPL_BUILD
167	#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
168	#endif
169	#endif
170
0299c90f SR	171	/*
	172	* mv-common.h should be defined after CMD configs since it used them
	173	* to enable certain macros
	174	*/
	175	#include "mv-common.h"
	176
	177	#endif /* _CONFIG_CLEARFOG_H */