[people/ms/u-boot.git] / include / configs / cm_t43.h

/*
 * cm_t43.h
 *
 * Copyright (C) 2015 Compulab, Ltd.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CM_T43_H
#define __CONFIG_CM_T43_H

#define CONFIG_AM43XX
#define CONFIG_CM_T43
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */

#include <asm/arch/omap.h>

/* Serial support */
#define CONFIG_OMAP_SERIAL
#define CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK		48000000
#define CONFIG_SYS_NS16550_COM1		0x44e09000

/* NAND support */
#define CONFIG_NAND
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	14
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
					 CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
					 10, 11, 12, 13, 14, 15, 16, 17, \
					 18, 19, 20, 21, 22, 23, 24, 25, \
					 26, 27, 28, 29, 30, 31, 32, 33, \
					 34, 35, 36, 37, 38, 39, 40, 41, \
					 42, 43, 44, 45, 46, 47, 48, 49, \
					 50, 51, 52, 53, 54, 55, 56, 57, }

/* CPSW Ethernet support */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_NET_MULTI
#define CONFIG_PHY_GIGE
#define CONFIG_PHY_ATHEROS
#define CONFIG_PHYLIB
#define CONFIG_SYS_RX_ETH_BUFFER	64

/* USB support */
#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST

/* SPI Flash support */
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SPI_FLASH_EON
#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_SST
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_TI_SPI_MMAP
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SF_DEFAULT_SPEED		48000000
#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3

/* Power */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_TPS65218

/* Enabling L2 Cache */
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE		0x48242000
#define CONFIG_SYS_CACHELINE_SIZE	32

/*
 * Since SPL did pll and ddr initialization for us,
 * we don't need to do it twice.
 */
#if !defined(CONFIG_SPL_BUILD)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif

#define CONFIG_HSMMC2_8BIT

#include <configs/ti_armv7_omap.h>
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_SPL_GPIO_SUPPORT
#undef CONFIG_SPL_NAND_SUPPORT
#undef CONFIG_SPL_BOARD_INIT
#undef CONFIG_BOOTDELAY
#include <config_distro_defaults.h>
#define CONFIG_ZERO_BOOTDELAY_CHECK
#undef CONFIG_CMD_IMLS

#define CONFIG_ENV_SIZE			(16 * 1024)
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#define V_OSCK				24000000  /* Clock output from T2 */
#define V_SCLK				(V_OSCK)

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SPI_MAX_HZ           48000000

#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"

/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x80200000\0" \
	"fdtaddr=0x81200000\0" \
	"bootm_size=0x8000000\0" \
	"autoload=no\0" \
	"console=ttyO0,115200n8\0" \
	"fdtfile=am437x-sb-som-t43.dtb\0" \
	"kernel=zImage-cm-t43\0" \
	"bootscr=bootscr.img\0" \
	"emmcroot=/dev/mmcblk0p2 rw\0" \
	"emmcrootfstype=ext4 rootwait\0" \
	"emmcargs=setenv bootargs console=${console} " \
		"root=${emmcroot} " \
		"rootfstype=${emmcrootfstype}\0" \
	"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"emmcboot=echo Booting from emmc ... && " \
		"run emmcargs && " \
		"load mmc 1 ${loadaddr} ${kernel} && " \
		"load mmc 1 ${fdtaddr} ${fdtfile} && " \
		"bootz ${loadaddr} - ${fdtaddr}\0"

#define CONFIG_BOOTCOMMAND \
	"mmc dev 0; " \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"fi; " \
	"fi; " \
	"mmc dev 1; " \
	"if mmc rescan; then " \
		"run emmcboot; " \
	"fi;"


#define CONFIG_CONS_INDEX		1

/* SPL defines. */
#define CONFIG_SPL_TEXT_BASE		0x40300350
#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD

#endif	/* __CONFIG_CM_T43_H */
Commit	Line	Data
8883ddaf NK	1	/*
	2	* cm_t43.h
	3	*
	4	* Copyright (C) 2015 Compulab, Ltd.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_CM_T43_H
	10	#define __CONFIG_CM_T43_H
	11
	12	#define CONFIG_AM43XX
	13	#define CONFIG_CM_T43
	14	#define CONFIG_ARCH_CPU_INIT
	15	#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */
	16	#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
	17
	18	#include <asm/arch/omap.h>
	19
	20	/* Serial support */
	21	#define CONFIG_OMAP_SERIAL
	22	#define CONFIG_DM_SERIAL
	23	#define CONFIG_SYS_NS16550
	24	#define CONFIG_SYS_NS16550_SERIAL
	25	#define CONFIG_SYS_NS16550_CLK 48000000
	26	#define CONFIG_SYS_NS16550_COM1 0x44e09000
	27
	28	/* NAND support */
	29	#define CONFIG_NAND
	30	#define CONFIG_NAND_OMAP_ELM
	31	#define CONFIG_SYS_NAND_ONFI_DETECTION
	32	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	33	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	34	#define CONFIG_SYS_NAND_OOBSIZE 64
	35	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	36	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	37	#define CONFIG_SYS_NAND_ECCSIZE 512
	38	#define CONFIG_SYS_NAND_ECCBYTES 14
	39	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
	40	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	41	CONFIG_SYS_NAND_PAGE_SIZE)
	42	#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
	43	10, 11, 12, 13, 14, 15, 16, 17, \
	44	18, 19, 20, 21, 22, 23, 24, 25, \
	45	26, 27, 28, 29, 30, 31, 32, 33, \
	46	34, 35, 36, 37, 38, 39, 40, 41, \
	47	42, 43, 44, 45, 46, 47, 48, 49, \
	48	50, 51, 52, 53, 54, 55, 56, 57, }
	49
	50	/* CPSW Ethernet support */
	51	#define CONFIG_DRIVER_TI_CPSW
	52	#define CONFIG_MII
	53	#define CONFIG_BOOTP_DEFAULT
	54	#define CONFIG_BOOTP_SEND_HOSTNAME
	55	#define CONFIG_BOOTP_GATEWAY
	56	#define CONFIG_NET_MULTI
	57	#define CONFIG_PHY_GIGE
	58	#define CONFIG_PHY_ATHEROS
	59	#define CONFIG_PHYLIB
	60	#define CONFIG_SYS_RX_ETH_BUFFER 64
	61
	62	/* USB support */
	63	#define CONFIG_USB_HOST
	64	#define CONFIG_USB_XHCI
65	#define CONFIG_USB_XHCI_OMAP
66	#define CONFIG_USB_XHCI_DWC3
67	#define CONFIG_USB_STORAGE
68	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
69	#define CONFIG_OMAP_USB_PHY
70	#define CONFIG_AM437X_USB2PHY2_HOST
71
72	/* SPI Flash support */
73	#define CONFIG_SPI_FLASH
74	#define CONFIG_SPI_FLASH_MACRONIX
75	#define CONFIG_SPI_FLASH_ATMEL
76	#define CONFIG_SPI_FLASH_EON
77	#define CONFIG_SPI_FLASH_GIGADEVICE
78	#define CONFIG_SPI_FLASH_SPANSION
79	#define CONFIG_SPI_FLASH_STMICRO
80	#define CONFIG_SPI_FLASH_SST
81	#define CONFIG_SPI_FLASH_WINBOND
82	#define CONFIG_TI_SPI_MMAP
83	#define CONFIG_SPI_FLASH_BAR
84	#define CONFIG_SF_DEFAULT_SPEED 48000000
85	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
86
87	/* Power */
88	#define CONFIG_POWER
89	#define CONFIG_POWER_I2C
90	#define CONFIG_POWER_TPS65218
91
92	/* Enabling L2 Cache */
93	#define CONFIG_SYS_L2_PL310
94	#define CONFIG_SYS_PL310_BASE 0x48242000
95	#define CONFIG_SYS_CACHELINE_SIZE 32
96
97	/*
98	* Since SPL did pll and ddr initialization for us,
99	* we don't need to do it twice.
100	*/
101	#if !defined(CONFIG_SPL_BUILD)
102	#define CONFIG_SKIP_LOWLEVEL_INIT
103	#endif
104
105	#define CONFIG_HSMMC2_8BIT
106
107	#include <configs/ti_armv7_omap.h>
108	#undef CONFIG_SPL_OS_BOOT
109	#undef CONFIG_SPL_GPIO_SUPPORT
110	#undef CONFIG_SPL_NAND_SUPPORT
111	#undef CONFIG_SPL_BOARD_INIT
112	#undef CONFIG_BOOTDELAY
113	#include <config_distro_defaults.h>
114	#define CONFIG_ZERO_BOOTDELAY_CHECK
115	#undef CONFIG_CMD_IMLS
116
117	#define CONFIG_ENV_SIZE (16 * 1024)
118	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
119
120	#define V_OSCK 24000000 /* Clock output from T2 */
121	#define V_SCLK (V_OSCK)
122
123	#define CONFIG_ENV_IS_IN_SPI_FLASH
124	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
125	#define CONFIG_ENV_OFFSET (768 * 1024)
126	#define CONFIG_ENV_SPI_MAX_HZ 48000000
127
128	#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
129
130	/* Enhance our eMMC support / experience. */
131	#define CONFIG_CMD_GPT
132	#define CONFIG_EFI_PARTITION
133
134	#define CONFIG_EXTRA_ENV_SETTINGS \
135	"loadaddr=0x80200000\0" \
136	"fdtaddr=0x81200000\0" \
137	"bootm_size=0x8000000\0" \
138	"autoload=no\0" \
139	"console=ttyO0,115200n8\0" \
140	"fdtfile=am437x-sb-som-t43.dtb\0" \
141	"kernel=zImage-cm-t43\0" \
142	"bootscr=bootscr.img\0" \
143	"emmcroot=/dev/mmcblk0p2 rw\0" \
144	"emmcrootfstype=ext4 rootwait\0" \
145	"emmcargs=setenv bootargs console=${console} " \
146	"root=${emmcroot} " \
147	"rootfstype=${emmcrootfstype}\0" \
148	"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
149	"bootscript=echo Running bootscript from mmc ...; " \
150	"source ${loadaddr}\0" \
151	"emmcboot=echo Booting from emmc ... && " \
152	"run emmcargs && " \
153	"load mmc 1 ${loadaddr} ${kernel} && " \
154	"load mmc 1 ${fdtaddr} ${fdtfile} && " \
155	"bootz ${loadaddr} - ${fdtaddr}\0"
156
157	#define CONFIG_BOOTCOMMAND \
158	"mmc dev 0; " \
159	"if mmc rescan; then " \
160	"if run loadbootscript; then " \
161	"run bootscript; " \
162	"fi; " \
163	"fi; " \
164	"mmc dev 1; " \
165	"if mmc rescan; then " \
166	"run emmcboot; " \
167	"fi;"
168
169
170	#define CONFIG_CONS_INDEX 1
171
172	/* SPL defines. */
173	#define CONFIG_SPL_TEXT_BASE 0x40300350
174	#define CONFIG_SPL_MAX_SIZE (64 * 1024)
175	#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
176	#define CONFIG_SPL_POWER_SUPPORT
177	#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
178	#define CONFIG_SPL_SPI_SUPPORT
179	#define CONFIG_SPL_SPI_FLASH_SUPPORT
180	#define CONFIG_SPL_SPI_LOAD
181
182	#endif /* __CONFIG_CM_T43_H */