[people/ms/u-boot.git] / include / configs / cmc_pu2.h

/*
 * 2004-2005 Gary Jennejohn <garyj@denx.de>
 *
 * Configuration settings for the CMC PU2 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */

#define AT91_SLOW_CLOCK		32768	/* slow clock */

#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
#define CONFIG_CMC_PU2		1	/* on an CMC_PU2 Board		*/
#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
#define USE_920T_MMU		1

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
/* flash */
#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
#define CONFIG_SYS_SMC_CSR0_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */

/* clocks */
#define CONFIG_SYS_PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */

/* sdram */
#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRC_CR_VAL	0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
#else
#define CONFIG_SKIP_RELOCATE_UBOOT
#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE		9600

/*
 * Hardware drivers
 */

/* define one of these to choose the DBGU, USART0  or USART1 as console */
#define CONFIG_AT91RM9200_USART
#undef CONFIG_DBGU
#define CONFIG_USART0
#undef CONFIG_USART1

#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/

#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */

#define CONFIG_HARD_I2C

#ifdef CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED		0	/* not used */
#define CONFIG_SYS_I2C_SLAVE		0	/* not used */
#define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
#define CONFIG_SYS_I2C_RTC_ADDR	0x32
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
#else
#define CONFIG_TIMESTAMP
#endif
/* still about 20 kB free with this defined */
#define CONFIG_SYS_LONGHELP

#define CONFIG_BOOTDELAY      1


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP

#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_MISC

#if defined(CONFIG_HARD_I2C)
    #define CONFIG_CMD_DATE
    #define CONFIG_CMD_EEPROM
    #define CONFIG_CMD_I2C
#endif


#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_LONGHELP

#define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */

#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM		0x20000000
#define PHYS_SDRAM_SIZE		0x1000000	/* 16 megs */

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144

#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_AT91C_USE_RMII

#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */

#define PHYS_FLASH_1			0x10000000
#define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MAX_FLASH_BANKS		1
#define CONFIG_SYS_MAX_FLASH_SECT		256
#define CONFIG_SYS_FLASH_ERASE_TOUT		(11 * CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT		( 2 * CONFIG_SYS_HZ)	/* Timeout for Flash Write */

#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_OFFSET			0x20000		/* after u-boot.bin */
#define CONFIG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
#define CONFIG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */

#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */

#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }

#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS		32		/* max number of command args */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
						/* AT91C_TC_TIMER_DIV1_CLOCK */

#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */

#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif

#define	CONFIG_EXTRA_ENV_SETTINGS	\
	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
		"addmtd;bootm\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
		"nfsroot=${serverip}:${rootpath}\0" \
	"net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
		"addcons addmtd; bootm\0" \
	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
	"addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
		"${hostname}::off\0" \
	"addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
	"addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
		"64k(environment),768k(linux),4096k(root),-\0" \
	"load=tftp ${loadaddr} ${loadfile}\0" \
	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
		"cp.b ${loadaddr} 10000000 ${filesize};" \
		"protect on 10000000 1001ffff\0" \
	"updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
		"cp.b ${loadaddr} 10030000 ${filesize}\0" \
	"updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
		"cp.b ${loadaddr} 100f0000 ${filesize}\0" \
	"updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
		"cp.b ${loadaddr} 104f0000 ${filesize}\0" \
	"cramfsimage=cramfs_cmc-pu2.img\0" \
	"jffsimage=jffs2_cmc-pu2.img\0" \
	"loadfile=u-boot_cmc-pu2.bin\0" \
	"bootfile=uImage_cmc-pu2\0" \
	"loadaddr=0x20800000\0" \
	"hostname=CMC-TC-PU2\0" \
	"bootcmd=run dhcp_start;run flash_cramfs\0" \
	"autoload=n\0" \
	"dhcp_start=echo no DHCP\0" \
	"ipaddr=192.168.0.190\0"
#endif	/* __CONFIG_H */
Commit	Line	Data
2cbe571a	1	/*
414eec35	2	* 2004-2005 Gary Jennejohn <garyj@denx.de>
2cbe571a	3	*
9d5028c2	4	* Configuration settings for the CMC PU2 board.
2cbe571a WD	5	*
	6	* See file CREDITS for list of people who contributed to this
	7	* project.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
45ea3fca	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2cbe571a WD	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24
	25	#ifndef __CONFIG_H
	26	#define __CONFIG_H
	27
2cbe571a	28	/* ARM asynchronous clock */
df3c7c8f	29	#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
101e8dfa	30	#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
2cbe571a WD	31
	32	#define AT91_SLOW_CLOCK 32768 /* slow clock */
	33
a85f9f21 WD	34	#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
a85f9f21 WD	35	#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
a85f9f21 WD	36	#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
	37	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	38	#define USE_920T_MMU 1
	39
2cbe571a WD	40	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	41	#define CONFIG_SETUP_MEMORY_TAGS 1
	42	#define CONFIG_INITRD_TAG 1
	43
8aa1a2d1	44	#ifndef CONFIG_SKIP_LOWLEVEL_INIT
6d0f6bcf	45	#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
ef2807c6	46	/* flash */
d481c80d JCPV	47	#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
d481c80d JCPV	48	#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
ef2807c6 WD	49
ef2807c6 WD	50	/* clocks */
d481c80d JCPV	51	#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
	52	#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
	53	#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
ef2807c6 WD	54
ef2807c6 WD	55	/* sdram */
d481c80d JCPV	56	#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
	57	#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
	58	#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
	59	#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
	60	#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
	61	#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
	62	#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
	63	#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
	64	#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
	65	#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
	66	#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
	67	#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
	68	#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
8052352f JS	69	#else
8052352f JS	70	#define CONFIG_SKIP_RELOCATE_UBOOT
8aa1a2d1	71	#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
ef2807c6	72
2cbe571a WD	73	/*
	74	* Size of malloc() pool
	75	*/
6d0f6bcf JCPV	76	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
6d0f6bcf JCPV	77	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
2cbe571a	78
45ea3fca	79	#define CONFIG_BAUDRATE 9600
2cbe571a	80
2cbe571a WD	81	/*
	82	* Hardware drivers
	83	*/
	84
	85	/* define one of these to choose the DBGU, USART0 or USART1 as console */
beebd851	86	#define CONFIG_AT91RM9200_USART
2cbe571a	87	#undef CONFIG_DBGU
9d5028c2 WD	88	#define CONFIG_USART0
9d5028c2 WD	89	#undef CONFIG_USART1
2cbe571a WD	90
	91	#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
	92
	93	#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
	94
9d5028c2	95	#define CONFIG_HARD_I2C
2cbe571a WD	96
2cbe571a WD	97	#ifdef CONFIG_HARD_I2C
6d0f6bcf JCPV	98	#define CONFIG_SYS_I2C_SPEED 0 /* not used */
6d0f6bcf JCPV	99	#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
45ea3fca	100	#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
6d0f6bcf JCPV	101	#define CONFIG_SYS_I2C_RTC_ADDR 0x32
	102	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	103	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	104	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
37e4f24b JL	105	#else
37e4f24b JL	106	#define CONFIG_TIMESTAMP
2cbe571a	107	#endif
ed54e621	108	/* still about 20 kB free with this defined */
6d0f6bcf	109	#define CONFIG_SYS_LONGHELP
2cbe571a	110
1ac7e17e	111	#define CONFIG_BOOTDELAY 1
2cbe571a	112
37e4f24b	113
80ff4f99 JL	114	/*
	115	* BOOTP options
	116	*/
	117	#define CONFIG_BOOTP_BOOTFILESIZE
	118	#define CONFIG_BOOTP_BOOTPATH
	119	#define CONFIG_BOOTP_GATEWAY
	120	#define CONFIG_BOOTP_HOSTNAME
	121
	122
37e4f24b JL	123	/*
	124	* Command line configuration.
	125	*/
	126	#include <config_cmd_default.h>
	127
	128	#define CONFIG_CMD_DHCP
	129	#define CONFIG_CMD_NFS
	130	#define CONFIG_CMD_SNTP
	131
	132	#undef CONFIG_CMD_FPGA
	133	#undef CONFIG_CMD_MISC
	134
	135	#if defined(CONFIG_HARD_I2C)
	136	#define CONFIG_CMD_DATE
	137	#define CONFIG_CMD_EEPROM
	138	#define CONFIG_CMD_I2C
2cbe571a WD	139	#endif
2cbe571a WD	140
37e4f24b	141
92b50ffe	142	#define CONFIG_MISC_INIT_R
6d0f6bcf	143	#define CONFIG_SYS_LONGHELP
2cbe571a	144
45ea3fca WD	145	#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
45ea3fca WD	146	#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
2cbe571a	147
45ea3fca WD	148	#define CONFIG_NR_DRAM_BANKS 1
45ea3fca WD	149	#define PHYS_SDRAM 0x20000000
2c5260f7	150	#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
2cbe571a	151
6d0f6bcf JCPV	152	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
6d0f6bcf JCPV	153	#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
2cbe571a WD	154
	155	#define CONFIG_DRIVER_ETHER
	156	#define CONFIG_NET_RETRY_COUNT 20
	157	#define CONFIG_AT91C_USE_RMII
	158
6d0f6bcf JCPV	159	#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
	160	#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
	161	#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
	162	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
	163	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
2cbe571a WD	164
2cbe571a WD	165	#define PHYS_FLASH_1 0x10000000
9d5028c2	166	#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
6d0f6bcf JCPV	167	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	168	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	169	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	170	#define CONFIG_SYS_MAX_FLASH_SECT 256
	171	#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
	172	#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
2cbe571a	173
5a1aceb0	174	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	175	#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
	176	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
	177	#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */
2cbe571a	178
6d0f6bcf	179	#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
2cbe571a	180
6d0f6bcf	181	#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
2cbe571a	182
6d0f6bcf JCPV	183	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	184	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	185	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	186	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
2cbe571a	187
6d0f6bcf JCPV	188	#define CONFIG_SYS_HZ 1000
6d0f6bcf JCPV	189	#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
59acc296	190	/* AT91C_TC_TIMER_DIV1_CLOCK */
2cbe571a WD	191
	192	#define CONFIG_STACKSIZE (321024) / regular stack */
	193
	194	#ifdef CONFIG_USE_IRQ
	195	#error CONFIG_USE_IRQ not supported
	196	#endif
	197
3dd7f0f0	198	#define CONFIG_EXTRA_ENV_SETTINGS \
fe126d8b	199	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
3dd7f0f0 WD	200	"addmtd;bootm\0" \
3dd7f0f0 WD	201	"nfsargs=setenv bootargs root=/dev/nfs rw " \
fe126d8b WD	202	"nfsroot=${serverip}:${rootpath}\0" \
fe126d8b WD	203	"net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
3dd7f0f0 WD	204	"addcons addmtd; bootm\0" \
	205	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
	206	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
fe126d8b WD	207	"addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
	208	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	209	"${hostname}::off\0" \
	210	"addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
	211	"addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
3dd7f0f0	212	"64k(environment),768k(linux),4096k(root),-\0" \
fe126d8b	213	"load=tftp ${loadaddr} ${loadfile}\0" \
3dd7f0f0	214	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
fe126d8b	215	"cp.b ${loadaddr} 10000000 ${filesize};" \
3dd7f0f0	216	"protect on 10000000 1001ffff\0" \
fe126d8b WD	217	"updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
	218	"cp.b ${loadaddr} 10030000 ${filesize}\0" \
	219	"updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
	220	"cp.b ${loadaddr} 100f0000 ${filesize}\0" \
	221	"updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
	222	"cp.b ${loadaddr} 104f0000 ${filesize}\0" \
3dd7f0f0 WD	223	"cramfsimage=cramfs_cmc-pu2.img\0" \
	224	"jffsimage=jffs2_cmc-pu2.img\0" \
	225	"loadfile=u-boot_cmc-pu2.bin\0" \
	226	"bootfile=uImage_cmc-pu2\0" \
	227	"loadaddr=0x20800000\0" \
	228	"hostname=CMC-TC-PU2\0" \
	229	"bootcmd=run dhcp_start;run flash_cramfs\0" \
	230	"autoload=n\0" \
	231	"dhcp_start=echo no DHCP\0" \
	232	"ipaddr=192.168.0.190\0"
45ea3fca	233	#endif /* __CONFIG_H */