[thirdparty/u-boot.git] / include / configs / colibri-imx8x.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2019 Toradex
 */

#ifndef __COLIBRI_IMX8X_H
#define __COLIBRI_IMX8X_H

#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>

#define CONFIG_REMAKE_ELF

#define CONFIG_DISPLAY_BOARDINFO_LATE

#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define USDHC1_BASE_ADDR		0x5b010000
#define USDHC2_BASE_ADDR		0x5b020000
#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */

#define CONFIG_ENV_OVERWRITE

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

/* Networking */
#define FEC_QUIRK_ENET_MAC

#define CONFIG_TFTP_TSIZE

#define CONFIG_IPADDR			192.168.10.2
#define CONFIG_NETMASK			255.255.255.0
#define CONFIG_SERVERIP			192.168.10.1

#define MEM_LAYOUT_ENV_SETTINGS \
	"fdt_addr_r=0x83000000\0" \
	"kernel_addr_r=0x81000000\0" \
	"ramdisk_addr_r=0x83800000\0" \
	"scriptaddr=0x80800000\0"

#ifdef CONFIG_AHAB_BOOT
#define AHAB_ENV "sec_boot=yes\0"
#else
#define AHAB_ENV "sec_boot=no\0"
#endif

/* Boot M4 */
#define M4_BOOT_ENV \
	"m4_0_image=m4_0.bin\0" \
	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
		"${m4_0_image}\0" \
	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \

#define MFG_NAND_PARTITION ""

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 1) \
	func(MMC, mmc, 0) \
	func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""

#define CONFIG_MFG_ENV_SETTINGS \
	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
		"rdinit=/linuxrc g_mass_storage.stall=0 " \
		"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
		"g_mass_storage.idProduct=0x37FF " \
		"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
		"${vidargs} clk_ignore_unused\0" \
	"initrd_addr=0x83800000\0" \
	"initrd_high=0xffffffff\0" \
	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
		"${fdt_addr};\0" \

/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
	AHAB_ENV \
	BOOTENV \
	CONFIG_MFG_ENV_SETTINGS \
	M4_BOOT_ENV \
	MEM_LAYOUT_ENV_SETTINGS \
	"boot_file=Image\0" \
	"console=ttyLP3 earlycon\0" \
	"fdt_addr=0x83000000\0"	\
	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
	"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
	"image=Image\0" \
	"initrd_addr=0x83800000\0" \
	"initrd_high=0xffffffffffffffff\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=PARTUUID=${uuid} rootwait " \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
		"${vidargs}\0" \
	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
		"colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \
		"${fdt_addr}\0" \
	"panel=NULL\0" \
	"script=boot.scr\0" \
	"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
		"if test \"$confirm\" = \"y\"; then " \
		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
		"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
		"${blkcnt}; fi\0" \
	"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"

/* Link Definitions */
#define CONFIG_LOADADDR			0x80280000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_SYS_INIT_SP_ADDR		0x80200000

#define CONFIG_SYS_MEMTEST_START	0x88000000
#define CONFIG_SYS_MEMTEST_END		0x89000000

/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_SYS_MMC_ENV_DEV		0	/* USDHC1 eMMC */
#define CONFIG_SYS_MMC_ENV_PART		1

#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

/* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
#define CONFIG_SYS_FSL_USDHC_NUM	2

#define CONFIG_SYS_BOOTM_LEN		SZ_64M /* Increase max gunzip size */

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)

#define CONFIG_SYS_SDRAM_BASE		0x80000000
#define PHYS_SDRAM_1			0x80000000
#define PHYS_SDRAM_2			0x880000000
#define PHYS_SDRAM_1_SIZE		SZ_2G		/* 2 GB */
#define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 GB */

/* Serial */
#define CONFIG_BAUDRATE			115200

/* Monitor Command Prompt */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_SYS_CBSIZE		SZ_2K
#define CONFIG_SYS_MAXARGS		64
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		8000000	/* 8MHz */

#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */

#endif /* __COLIBRI_IMX8X_H */
Commit	Line	Data
7ce134b7 MZ	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* Copyright 2019 Toradex
	4	*/
	5
	6	#ifndef __COLIBRI_IMX8X_H
	7	#define __COLIBRI_IMX8X_H
	8
	9	#include <asm/arch/imx-regs.h>
	10	#include <linux/sizes.h>
	11
	12	#define CONFIG_REMAKE_ELF
	13
	14	#define CONFIG_DISPLAY_BOARDINFO_LATE
	15
7ce134b7 MZ	16	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	17	#define USDHC1_BASE_ADDR 0x5b010000
	18	#define USDHC2_BASE_ADDR 0x5b020000
	19	#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
	20
	21	#define CONFIG_ENV_OVERWRITE
	22
	23	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	24
	25	/* Networking */
	26	#define FEC_QUIRK_ENET_MAC
	27
7ce134b7 MZ	28	#define CONFIG_TFTP_TSIZE
	29
	30	#define CONFIG_IPADDR 192.168.10.2
	31	#define CONFIG_NETMASK 255.255.255.0
	32	#define CONFIG_SERVERIP 192.168.10.1
	33
	34	#define MEM_LAYOUT_ENV_SETTINGS \
	35	"fdt_addr_r=0x83000000\0" \
	36	"kernel_addr_r=0x81000000\0" \
	37	"ramdisk_addr_r=0x83800000\0" \
	38	"scriptaddr=0x80800000\0"
	39
	40	#ifdef CONFIG_AHAB_BOOT
	41	#define AHAB_ENV "sec_boot=yes\0"
	42	#else
	43	#define AHAB_ENV "sec_boot=no\0"
	44	#endif
	45
	46	/* Boot M4 */
	47	#define M4_BOOT_ENV \
	48	"m4_0_image=m4_0.bin\0" \
	49	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
	50	"${m4_0_image}\0" \
	51	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
	52
	53	#define MFG_NAND_PARTITION ""
	54
	55	#define BOOT_TARGET_DEVICES(func) \
	56	func(MMC, mmc, 1) \
	57	func(MMC, mmc, 0) \
	58	func(DHCP, dhcp, na)
	59	#include <config_distro_bootcmd.h>
	60	#undef BOOTENV_RUN_NET_USB_START
	61	#define BOOTENV_RUN_NET_USB_START ""
	62
	63	#define CONFIG_MFG_ENV_SETTINGS \
	64	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
	65	"rdinit=/linuxrc g_mass_storage.stall=0 " \
	66	"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
	67	"g_mass_storage.idProduct=0x37FF " \
	68	"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
	69	"${vidargs} clk_ignore_unused\0" \
	70	"initrd_addr=0x83800000\0" \
	71	"initrd_high=0xffffffff\0" \
	72	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
	73	"${fdt_addr};\0" \
	74
	75	/* Initial environment variables */
	76	#define CONFIG_EXTRA_ENV_SETTINGS \
	77	AHAB_ENV \
	78	BOOTENV \
	79	CONFIG_MFG_ENV_SETTINGS \
	80	M4_BOOT_ENV \
	81	MEM_LAYOUT_ENV_SETTINGS \
848ba639	82	"boot_file=Image\0" \
7ce134b7 MZ	83	"console=ttyLP3 earlycon\0" \
	84	"fdt_addr=0x83000000\0" \
	85	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
	86	"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
	87	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
	88	"image=Image\0" \
	89	"initrd_addr=0x83800000\0" \
	90	"initrd_high=0xffffffffffffffff\0" \
	91	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	92	"root=PARTUUID=${uuid} rootwait " \
	93	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	94	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	95	"netargs=setenv bootargs console=${console},${baudrate} " \
	96	"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
	97	"${vidargs}\0" \
	98	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
	99	"colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \
	100	"${fdt_addr}\0" \
	101	"panel=NULL\0" \
	102	"script=boot.scr\0" \
	103	"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
	104	"if test \"$confirm\" = \"y\"; then " \
	105	"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
	106	"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
	107	"${blkcnt}; fi\0" \
	108	"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
	109
	110	/* Link Definitions */
	111	#define CONFIG_LOADADDR 0x80280000
	112
	113	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	114
	115	#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
	116
	117	#define CONFIG_SYS_MEMTEST_START 0x88000000
	118	#define CONFIG_SYS_MEMTEST_END 0x89000000
	119
	120	/* Environment in eMMC, before config block at the end of 1st "boot sector" */
7ce134b7 MZ	121	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 eMMC */
	122	#define CONFIG_SYS_MMC_ENV_PART 1
	123
	124	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	125
	126	/* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
	127	#define CONFIG_SYS_FSL_USDHC_NUM 2
	128
	129	#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
	130
	131	/* Size of malloc() pool */
	132	#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
	133
	134	#define CONFIG_SYS_SDRAM_BASE 0x80000000
	135	#define PHYS_SDRAM_1 0x80000000
	136	#define PHYS_SDRAM_2 0x880000000
	137	#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
	138	#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
	139
	140	/* Serial */
	141	#define CONFIG_BAUDRATE 115200
	142
	143	/* Monitor Command Prompt */
	144	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	145	#define CONFIG_SYS_CBSIZE SZ_2K
	146	#define CONFIG_SYS_MAXARGS 64
	147	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	148	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	149	sizeof(CONFIG_SYS_PROMPT) + 16)
	150
	151	/* Generic Timer Definitions */
	152	#define COUNTER_FREQUENCY 8000000 /* 8MHz */
	153
	154	#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
	155	#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
	156
	157	#endif /* __COLIBRI_IMX8X_H */