[thirdparty/u-boot.git] / include / configs / colibri_imx7.h

/*
 * Copyright 2016 Toradex AG
 *
 * Configuration settings for the Colibri iMX7 module.
 *
 * based on mx7dsabresd.h:
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __COLIBRI_IMX7_CONFIG_H
#define __COLIBRI_IMX7_CONFIG_H

#include "mx7_common.h"

#define CONFIG_SYS_THUMB_BUILD

/*#define CONFIG_DBG_MONITOR*/
#define PHYS_SDRAM_SIZE			SZ_512M

#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)

#define CONFIG_CMD_BMODE

/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE             RMII
#define CONFIG_ETHPRIME                 "FEC"
#define CONFIG_FEC_MXC_PHYADDR          0

#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE		16352
#define CONFIG_TFTP_TSIZE

/* ENET1 */
#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR

/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	1

#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS

/* I2C configs */
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_IPADDR			192.168.10.2
#define CONFIG_NETMASK			255.255.255.0
#define CONFIG_SERVERIP			192.168.10.1

#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x10000000\0" \
	"fdt_addr_r=0x82000000\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"kernel_addr_r=0x81000000\0" \
	"ramdisk_addr_r=0x82100000\0"

#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"run m4boot && " \
	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
	"nfsboot=run setup; " \
		"setenv bootargs ${defargs} ${nfsargs} " \
		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
		"dhcp ${kernel_addr_r} && "	\
		"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define UBI_BOOTCMD	\
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
		"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
		"setenv bootargs ${defargs} ${ubiargs} " \
		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
		"ubi part ubi && run m4boot && " \
		"ubi read ${kernel_addr_r} kernel && " \
		"ubi read ${fdt_addr_r} dtb && " \
		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

#define CONFIG_EXTRA_ENV_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	NFS_BOOTCMD \
	SD_BOOTCMD \
	UBI_BOOTCMD \
	"console=ttymxc0\0" \
	"defargs=\0" \
	"fdt_board=eval-v3\0" \
	"fdt_fixup=;\0" \
	"m4boot=;\0" \
	"ip_dyn=yes\0" \
	"kernel_file=zImage\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
		"${board}/flash_eth.img && source ${loadaddr}\0" \
	"setsdupdate=mmc rescan && setenv interface mmc && " \
		"fatload ${interface} 0:1 ${loadaddr} " \
		"${board}/flash_blk.img && source ${loadaddr}\0" \
	"setup=setenv setupargs " \
		"console=tty1 console=${console}" \
		",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
	"setusbupdate=usb start && setenv interface usb && " \
		"fatload ${interface} 0:1 ${loadaddr} " \
		"${board}/flash_blk.img && source ${loadaddr}\0" \
	"splashpos=m,m\0" \
	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x0c000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* environment organization */
#define CONFIG_ENV_IS_IN_NAND

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#elif defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_OFFSET		(4 * 1024 * 1024)
#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#endif

#define CONFIG_NAND_MXS
#define CONFIG_CMD_NAND_TRIMFFS

/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
#define CONFIG_CMD_NAND_TORTURE

/* UBI stuff */
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:"		\
				"512k(mx7-bcb),"		\
				"3584k(u-boot)ro,"		\
				"512k(u-boot-env),"		\
				"-(ubi)"

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2

#define CONFIG_IMX_THERMAL

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* USB Device Firmware Update support */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT	300

#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#endif

#endif
Commit	Line	Data
ae440ab0 SA	1	/*
	2	* Copyright 2016 Toradex AG
	3	*
	4	* Configuration settings for the Colibri iMX7 module.
	5	*
	6	* based on mx7dsabresd.h:
	7	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __COLIBRI_IMX7_CONFIG_H
	13	#define __COLIBRI_IMX7_CONFIG_H
	14
	15	#include "mx7_common.h"
	16
	17	#define CONFIG_SYS_THUMB_BUILD
ae440ab0 SA	18
	19	/#define CONFIG_DBG_MONITOR/
	20	#define PHYS_SDRAM_SIZE SZ_512M
	21
b891d010 MZ	22	#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
	23
	24	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	25	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
ae440ab0 SA	26
	27	/* Size of malloc() pool */
	28	#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
	29
ae440ab0 SA	30	#define CONFIG_CMD_BMODE
	31
	32	/* Network */
	33	#define CONFIG_FEC_MXC
	34	#define CONFIG_MII
	35	#define CONFIG_FEC_XCV_TYPE RMII
	36	#define CONFIG_ETHPRIME "FEC"
	37	#define CONFIG_FEC_MXC_PHYADDR 0
	38
	39	#define CONFIG_PHYLIB
	40	#define CONFIG_PHY_MICREL
ae440ab0	41	#define CONFIG_IP_DEFRAG
f7c81e28 MZ	42	#define CONFIG_TFTP_BLOCKSIZE 16352
f7c81e28 MZ	43	#define CONFIG_TFTP_TSIZE
ae440ab0 SA	44
	45	/* ENET1 */
	46	#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
	47
	48	/* MMC Config*/
	49	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	50	#define CONFIG_SYS_FSL_USDHC_NUM 1
	51
	52	#undef CONFIG_BOOTM_PLAN9
	53	#undef CONFIG_BOOTM_RTEMS
	54
	55	/* I2C configs */
ae440ab0	56	#define CONFIG_SYS_I2C_MXC
ae440ab0 SA	57	#define CONFIG_SYS_I2C_SPEED 100000
	58
	59	#define CONFIG_IPADDR 192.168.10.2
	60	#define CONFIG_NETMASK 255.255.255.0
	61	#define CONFIG_SERVERIP 192.168.10.1
	62
	63	#define MEM_LAYOUT_ENV_SETTINGS \
9af131e3	64	"bootm_size=0x10000000\0" \
ae440ab0 SA	65	"fdt_addr_r=0x82000000\0" \
	66	"fdt_high=0xffffffff\0" \
	67	"initrd_high=0xffffffff\0" \
	68	"kernel_addr_r=0x81000000\0" \
	69	"ramdisk_addr_r=0x82100000\0"
	70
	71	#define SD_BOOTCMD \
	72	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	73	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
	74	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	75	"run m4boot && " \
	76	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
	77	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	78	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	79
	80	#define NFS_BOOTCMD \
	81	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	82	"nfsboot=run setup; " \
	83	"setenv bootargs ${defargs} ${nfsargs} " \
	84	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	85	"dhcp ${kernel_addr_r} && " \
	86	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	87	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	88
	89	#define UBI_BOOTCMD \
	90	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	91	"ubi.fm_autoconvert=1\0" \
	92	"ubiboot=run setup; " \
	93	"setenv bootargs ${defargs} ${ubiargs} " \
	94	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	95	"ubi part ubi && run m4boot && " \
	96	"ubi read ${kernel_addr_r} kernel && " \
	97	"ubi read ${fdt_addr_r} dtb && " \
	98	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	99
	100	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
	101
	102	#define CONFIG_EXTRA_ENV_SETTINGS \
	103	MEM_LAYOUT_ENV_SETTINGS \
	104	NFS_BOOTCMD \
	105	SD_BOOTCMD \
	106	UBI_BOOTCMD \
	107	"console=ttymxc0\0" \
	108	"defargs=\0" \
	109	"fdt_board=eval-v3\0" \
	110	"fdt_fixup=;\0" \
	111	"m4boot=;\0" \
	112	"ip_dyn=yes\0" \
	113	"kernel_file=zImage\0" \
	114	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	115	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
	116	"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
	117	"${board}/flash_eth.img && source ${loadaddr}\0" \
	118	"setsdupdate=mmc rescan && setenv interface mmc && " \
	119	"fatload ${interface} 0:1 ${loadaddr} " \
	120	"${board}/flash_blk.img && source ${loadaddr}\0" \
	121	"setup=setenv setupargs " \
	122	"console=tty1 console=${console}" \
	123	",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
	124	"setupdate=run setsdupdate \|\| run setusbupdate \|\| run setethupdate\0" \
	125	"setusbupdate=usb start && setenv interface usb && " \
	126	"fatload ${interface} 0:1 ${loadaddr} " \
	127	"${board}/flash_blk.img && source ${loadaddr}\0" \
	128	"splashpos=m,m\0" \
129	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
130
131	/* Miscellaneous configurable options */
132	#define CONFIG_SYS_LONGHELP
133
134	#define CONFIG_SYS_MEMTEST_START 0x80000000
135	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
136
137	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
138	#define CONFIG_SYS_HZ 1000
139
140	#define CONFIG_STACKSIZE SZ_128K
141
142	/* Physical Memory Map */
143	#define CONFIG_NR_DRAM_BANKS 1
144	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
145
146	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
147	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
148	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
149
150	#define CONFIG_SYS_INIT_SP_OFFSET \
151	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
152	#define CONFIG_SYS_INIT_SP_ADDR \
153	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
154
e856bdcf	155	/* environment organization */
ae440ab0 SA	156	#define CONFIG_ENV_IS_IN_NAND
	157
	158	#if defined(CONFIG_ENV_IS_IN_MMC)
	159	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
	160	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
	161	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
	162	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	163	#elif defined(CONFIG_ENV_IS_IN_NAND)
	164	#define CONFIG_ENV_OFFSET (4 * 1024 * 1024)
	165	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	166	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	167	#endif
	168
	169	#define CONFIG_NAND_MXS
	170	#define CONFIG_CMD_NAND_TRIMFFS
	171
	172	/* NAND stuff */
	173	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	174	#define CONFIG_SYS_NAND_BASE 0x40000000
	175	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	176	#define CONFIG_SYS_NAND_ONFI_DETECTION
	177	#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
	178	#define CONFIG_CMD_NAND_TORTURE
	179
	180	/* UBI stuff */
	181	#define CONFIG_RBTREE
	182	#define CONFIG_LZO
ae440ab0 SA	183	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
	184
	185	/* Dynamic MTD partition support */
	186	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	187	#define CONFIG_MTD_PARTITIONS
	188	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	189	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	190	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
	191	"512k(mx7-bcb)," \
	192	"3584k(u-boot)ro," \
	193	"512k(u-boot-env)," \
	194	"-(ubi)"
	195
	196	/* DMA stuff, needed for GPMI/MXS NAND support */
	197	#define CONFIG_APBH_DMA
	198	#define CONFIG_APBH_DMA_BURST
	199	#define CONFIG_APBH_DMA_BURST8
	200
	201	/* USB Configs */
ae440ab0 SA	202	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	203
	204	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	205	#define CONFIG_MXC_USB_FLAGS 0
	206	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	207
	208	#define CONFIG_IMX_THERMAL
	209
	210	#define CONFIG_USBD_HS
	211
	212	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	213
	214	/* USB Device Firmware Update support */
ae440ab0 SA	215	#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
	216	#define DFU_DEFAULT_POLL_TIMEOUT 300
	217
ae440ab0	218	#ifdef CONFIG_VIDEO
ae440ab0 SA	219	#define CONFIG_VIDEO_MXS
ae440ab0 SA	220	#define CONFIG_VIDEO_LOGO
ae440ab0 SA	221	#define CONFIG_SPLASH_SCREEN
	222	#define CONFIG_SPLASH_SCREEN_ALIGN
	223	#define CONFIG_CMD_BMP
	224	#define CONFIG_BMP_16BPP
	225	#define CONFIG_VIDEO_BMP_RLE8
	226	#define CONFIG_VIDEO_BMP_LOGO
	227	#endif
	228
	229	#endif