]>
Commit | Line | Data |
---|---|---|
aa245090 WD |
1 | /* |
2 | * (C) Copyright 2004 | |
3 | * Tolunay Orkun, Nextio Inc., torkun@nextio.com | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | /* | |
25 | * board/config.h - configuration options, board specific | |
26 | */ | |
27 | ||
28 | #ifndef __CONFIG_H | |
29 | #define __CONFIG_H | |
30 | ||
31 | /* | |
32 | * High Level Configuration Options | |
33 | * (easy to change) | |
34 | */ | |
35 | ||
53677ef1 | 36 | #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ |
aa245090 WD |
37 | #define CONFIG_4xx 1 /* ...member of PPC4xx family */ |
38 | #define CONFIG_CSB472 1 /* on a Cogent CSB472 board */ | |
39 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ | |
40 | #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ | |
41 | #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ | |
42 | ||
43 | /* | |
44 | * OS Bootstrap configuration | |
45 | * | |
46 | */ | |
47 | ||
48 | #if 0 | |
49 | #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ | |
50 | #else | |
51 | #define CONFIG_BOOTDELAY 3 /* autoboot after X seconds */ | |
52 | #endif | |
53 | ||
54 | #define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress when bootdelay = 0 */ | |
55 | ||
56 | #if 1 | |
57 | #undef CONFIG_BOOTARGS | |
58 | #define CONFIG_BOOTCOMMAND \ | |
59 | "setenv bootargs console=ttyS0,38400 debug " \ | |
60 | "root=/dev/ram rw ramdisk_size=4096 " \ | |
fe126d8b | 61 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ |
aa245090 WD |
62 | "bootm ff800000 ff900000" |
63 | #endif | |
64 | ||
65 | #if 0 | |
66 | #undef CONFIG_BOOTARGS | |
67 | #define CONFIG_BOOTCOMMAND \ | |
68 | "bootp; " \ | |
69 | "setenv bootargs console=ttyS0,38400 debug " \ | |
fe126d8b WD |
70 | "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ |
71 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ | |
aa245090 WD |
72 | "bootm" |
73 | #endif | |
74 | ||
75 | /* | |
2fd90ce5 | 76 | * BOOTP options |
aa245090 | 77 | */ |
2fd90ce5 JL |
78 | #define CONFIG_BOOTP_SUBNETMASK |
79 | #define CONFIG_BOOTP_GATEWAY | |
80 | #define CONFIG_BOOTP_HOSTNAME | |
81 | #define CONFIG_BOOTP_BOOTPATH | |
82 | #define CONFIG_BOOTP_BOOTFILESIZE | |
83 | #define CONFIG_BOOTP_DNS2 | |
84 | ||
37e4f24b | 85 | |
aa245090 | 86 | /* |
37e4f24b | 87 | * Command line configuration. |
aa245090 | 88 | */ |
37e4f24b JL |
89 | #include <config_cmd_default.h> |
90 | ||
91 | #define CONFIG_CMD_ASKENV | |
92 | #define CONFIG_CMD_BEDBUG | |
93 | #define CONFIG_CMD_ELF | |
94 | #define CONFIG_CMD_IRQ | |
95 | #define CONFIG_CMD_I2C | |
96 | #define CONFIG_CMD_PCI | |
97 | #define CONFIG_CMD_DATE | |
98 | #define CONFIG_CMD_MII | |
99 | #define CONFIG_CMD_PING | |
100 | #define CONFIG_CMD_DHCP | |
101 | ||
aa245090 WD |
102 | /* |
103 | * Serial download configuration | |
104 | * | |
105 | */ | |
106 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
6d0f6bcf | 107 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
aa245090 WD |
108 | |
109 | /* | |
110 | * KGDB Configuration | |
111 | * | |
112 | */ | |
37e4f24b | 113 | #if defined(CONFIG_CMD_KGDB) |
aa245090 WD |
114 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
115 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
116 | #endif | |
117 | ||
118 | /* | |
119 | * Miscellaneous configurable options | |
120 | * | |
121 | */ | |
6d0f6bcf JCPV |
122 | #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
123 | #ifdef CONFIG_SYS_HUSH_PARSER | |
124 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* hush shell secondary prompt */ | |
aa245090 WD |
125 | #endif |
126 | ||
6d0f6bcf JCPV |
127 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
128 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
37e4f24b | 129 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 130 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
aa245090 | 131 | #else |
6d0f6bcf | 132 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
aa245090 | 133 | #endif |
6d0f6bcf JCPV |
134 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
135 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
136 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
aa245090 | 137 | |
6d0f6bcf JCPV |
138 | #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
139 | #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ | |
aa245090 | 140 | |
6d0f6bcf | 141 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
6d0f6bcf JCPV |
142 | #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ |
143 | #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ | |
aa245090 WD |
144 | |
145 | /* | |
146 | * For booting Linux, the board info and command line data | |
147 | * have to be in the first 8 MB of memory, since this is | |
148 | * the maximum mapped by the Linux kernel during initialization. | |
149 | */ | |
6d0f6bcf | 150 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
aa245090 WD |
151 | |
152 | /* | |
153 | * watchdog configuration | |
154 | * | |
155 | */ | |
156 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
157 | ||
158 | /* | |
159 | * UART configuration | |
160 | * | |
161 | */ | |
550650dd SR |
162 | #define CONFIG_CONS_INDEX 1 /* Use UART0 */ |
163 | #define CONFIG_SYS_NS16550 | |
164 | #define CONFIG_SYS_NS16550_SERIAL | |
165 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
166 | #define CONFIG_SYS_NS16550_CLK get_serial_clock() | |
167 | ||
6d0f6bcf | 168 | #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* use internal serial clock */ |
6d0f6bcf | 169 | #define CONFIG_SYS_BASE_BAUD 691200 |
aa245090 | 170 | #define CONFIG_BAUDRATE 38400 /* Default baud rate */ |
6d0f6bcf | 171 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
aa245090 WD |
172 | { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 } |
173 | ||
174 | /* | |
175 | * I2C configuration | |
176 | * | |
177 | */ | |
178 | #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ | |
d0b0dcaa | 179 | #define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ |
6d0f6bcf JCPV |
180 | #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ |
181 | #define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ | |
aa245090 WD |
182 | |
183 | /* | |
184 | * MII PHY configuration | |
185 | * | |
186 | */ | |
96e21f86 | 187 | #define CONFIG_PPC4xx_EMAC |
aa245090 WD |
188 | #define CONFIG_MII 1 /* MII PHY management */ |
189 | #define CONFIG_PHY_ADDR 0 /* PHY address */ | |
53677ef1 | 190 | #define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */ |
aa245090 WD |
191 | /* 32usec min. for LXT971A */ |
192 | #define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ | |
18cc7afd | 193 | #define CONFIG_NET_MULTI |
aa245090 WD |
194 | |
195 | /* | |
196 | * RTC configuration | |
197 | * | |
198 | * Note that DS1307 RTC is limited to 100Khz I2C bus. | |
199 | * | |
200 | */ | |
201 | #define CONFIG_RTC_DS1307 /* Use Dallas 1307 RTC */ | |
202 | ||
203 | /* | |
204 | * PCI stuff | |
205 | * | |
206 | */ | |
207 | #define CONFIG_PCI /* include pci support */ | |
208 | #define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ | |
209 | #define PCI_HOST_FORCE 1 /* configure as pci host */ | |
210 | #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ | |
211 | ||
212 | #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ | |
213 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
214 | /* resource configuration */ | |
215 | #undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ | |
216 | #define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ | |
217 | ||
6d0f6bcf JCPV |
218 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ |
219 | #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ | |
220 | #define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ | |
221 | #define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ | |
222 | #define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ | |
223 | #define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */ | |
224 | #define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */ | |
225 | #define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ | |
aa245090 WD |
226 | |
227 | /* | |
228 | * IDE stuff | |
229 | * | |
230 | */ | |
231 | #undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */ | |
232 | #undef CONFIG_IDE_LED /* no led for ide supported */ | |
233 | #undef CONFIG_IDE_RESET /* no reset for ide supported */ | |
234 | ||
235 | /* | |
236 | * Environment configuration | |
237 | * | |
238 | */ | |
5a1aceb0 | 239 | #define CONFIG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */ |
9314cee6 | 240 | #undef CONFIG_ENV_IS_IN_NVRAM |
bb1f8b4f | 241 | #undef CONFIG_ENV_IS_IN_EEPROM |
aa245090 WD |
242 | |
243 | /* | |
244 | * General Memory organization | |
245 | * | |
246 | * Start addresses for the final memory configuration | |
247 | * (Set up by the startup code) | |
6d0f6bcf | 248 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
aa245090 | 249 | */ |
6d0f6bcf JCPV |
250 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
251 | #define CONFIG_SYS_FLASH_BASE 0xFF800000 | |
252 | #define CONFIG_SYS_FLASH_SIZE 0x00800000 | |
14d0a02a | 253 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
6d0f6bcf JCPV |
254 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */ |
255 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */ | |
256 | ||
257 | #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE | |
258 | #define CONFIG_SYS_RAMSTART | |
aa245090 WD |
259 | #endif |
260 | ||
5a1aceb0 | 261 | #if defined(CONFIG_ENV_IS_IN_FLASH) |
0e8d1586 JCPV |
262 | #define CONFIG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */ |
263 | #define CONFIG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */ | |
264 | #define CONFIG_ENV_SIZE 0x00001000 /* Size of Environment */ | |
265 | #define CONFIG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */ | |
aa245090 WD |
266 | #endif |
267 | ||
268 | /* | |
269 | * FLASH Device configuration | |
270 | * | |
271 | */ | |
6d0f6bcf | 272 | #define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ |
00b1883a | 273 | #define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ |
6d0f6bcf JCPV |
274 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ |
275 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ | |
276 | #define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ | |
277 | #define CONFIG_SYS_MAX_FLASH_SECT 64 /* max # of sectors on one chip */ | |
278 | #define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */ | |
279 | #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } | |
aa245090 WD |
280 | |
281 | /* | |
282 | * On Chip Memory location/size | |
283 | * | |
284 | */ | |
6d0f6bcf JCPV |
285 | #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 |
286 | #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 | |
aa245090 WD |
287 | |
288 | /* | |
289 | * Global info and initial stack | |
290 | * | |
291 | */ | |
6d0f6bcf JCPV |
292 | #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ |
293 | #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ | |
294 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ | |
295 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
296 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
aa245090 | 297 | |
aa245090 WD |
298 | /* |
299 | * Miscellaneous board specific definitions | |
300 | * | |
301 | */ | |
302 | #define CONFIG_I2CFAST 1 /* enable "i2cfast" env. setting */ | |
303 | ||
304 | /* | |
305 | * Internal Definitions | |
306 | * | |
307 | * Boot Flags | |
308 | * | |
309 | */ | |
310 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
311 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
312 | ||
313 | #endif /* __CONFIG_H */ |