[people/ms/u-boot.git] / include / configs / cyrus.h

/*
 * Based on corenet_ds.h
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_CYRUS

#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
#error Must call Cyrus CONFIG with a specific CPU enabled.
#endif

#define CONFIG_SDCARD
#define CONFIG_FSL_SATA_V2
#define CONFIG_PCIE3
#define CONFIG_PCIE4
#ifdef CONFIG_ARCH_P5020
#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_SYS_DPAA_RMAN
#endif
#define CONFIG_SYS_DPAA_PME

/*
 * Corenet DS style board configuration file
 */
#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
#if defined(CONFIG_ARCH_P5020)
#define CONFIG_SYS_CLK_FREQ 133000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
#elif defined(CONFIG_ARCH_P5040)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
#endif

/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
#define CONFIG_MP			/* support multiple processors */

#define CONFIG_SYS_MMC_MAX_DEVICE     1

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xeff40000
#endif

#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
#define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
#define CONFIG_PCIE1			/* PCIE controller 1 */
#define CONFIG_PCIE2			/* PCIE controller 2 */
#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

#define CONFIG_ENV_OVERWRITE

#define CONFIG_SYS_NO_FLASH

#if defined(CONFIG_SDCARD)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_FSL_FIXED_MMC_LOCATION
#define CONFIG_SYS_MMC_ENV_DEV          0
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		(512 * 1658)
#endif

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_SYS_CACHE_STASHING
#define CONFIG_BACKSIDE_L2_CACHE
#define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
#define CONFIG_BTB			/* toggle branch predition */
#define	CONFIG_DDR_ECC
#ifdef CONFIG_DDR_ECC
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
#endif

#define CONFIG_ENABLE_36BIT_PHYS

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_ADDR_MAP
#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
#endif

/* test POST memory test */
#undef CONFIG_POST
#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00400000
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_PANIC_HANG	/* do not reset board on panic */

/*
 *  Config the L3 Cache as L3 SRAM
 */
#define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_L3_ADDR_PHYS	(0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
#else
#define CONFIG_SYS_INIT_L3_ADDR_PHYS	CONFIG_SYS_INIT_L3_ADDR
#endif
#define CONFIG_SYS_L3_SIZE		(1024 << 10)
#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_DCSRBAR		0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
#endif

/*
 * DDR Setup
 */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)

#define CONFIG_DDR_SPD

#define CONFIG_SYS_SPD_BUS_NUM	1
#define SPD_EEPROM_ADDRESS1	0x51
#define SPD_EEPROM_ADDRESS2	0x52
#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */

/*
 * Local Bus Definitions
 */

#define CONFIG_SYS_LBC0_BASE		0xe0000000 /* Start of LBC Registers */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_LBC0_BASE_PHYS	0xfe0000000ull
#else
#define CONFIG_SYS_LBC0_BASE_PHYS	CONFIG_SYS_LBC0_BASE
#endif

#define CONFIG_SYS_LBC1_BASE		0xe1000000 /* Start of LBC Registers */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_LBC1_BASE_PHYS	0xfe1000000ull
#else
#define CONFIG_SYS_LBC1_BASE_PHYS	CONFIG_SYS_LBC1_BASE
#endif

/* Set the local bus clock 1/16 of platform clock */
#define CONFIG_SYS_LBC_LCRR		(LCRR_CLKDIV_16 | LCRR_EADC_1)

#define CONFIG_SYS_BR0_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
#define CONFIG_SYS_BR1_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)

#define CONFIG_SYS_OR0_PRELIM	0xfff00010
#define CONFIG_SYS_OR1_PRELIM	0xfff00010

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* start of monitor */

#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
#define CONFIG_MISC_INIT_R

#define CONFIG_HWCONFIG

/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
/* The assembler doesn't like typecast */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
#else
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
#endif
#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000	/* Size of used area in RAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */

/* Serial Port - controlled on board with jumper J8
 * open - index 2
 * shorted - index 1
 */
#define CONFIG_CONS_INDEX	1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)

#define CONFIG_SYS_BAUDRATE_TABLE	\
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_FSL_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET		0x118000
#define CONFIG_SYS_FSL_I2C2_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C2_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET		0x118100
#define CONFIG_SYS_FSL_I2C3_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C3_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C3_OFFSET		0x119000
#define CONFIG_SYS_FSL_I2C4_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C4_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C4_OFFSET		0x119100

#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM	0
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57

#define CONFIG_SYS_I2C_GENERIC_MAC
#define CONFIG_SYS_I2C_MAC1_BUS 3
#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
#define CONFIG_SYS_I2C_MAC2_BUS 0
#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa

#define CONFIG_CMD_DATE			1
#define CONFIG_RTC_MCP79411		1
#define CONFIG_SYS_RTC_BUS_NUM		3
#define CONFIG_SYS_I2C_RTC_ADDR		0x6f

/*
 * eSPI - Enhanced SPI
 */

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */

/* controller 1, direct to uli, tgtid 3, Base address 20000 */
#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
#else
#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
#endif
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
#else
#define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
#endif
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */

/* controller 2, Slot 2, tgtid 2, Base address 201000 */
#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
#else
#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
#endif
#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
#else
#define CONFIG_SYS_PCIE2_IO_PHYS	0xf8010000
#endif
#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */

/* controller 3, Slot 1, tgtid 1, Base address 202000 */
#define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
#else
#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc0000000
#endif
#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
#else
#define CONFIG_SYS_PCIE3_IO_PHYS	0xf8020000
#endif
#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */

/* controller 4, Base address 203000 */
#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
#define CONFIG_SYS_PCIE4_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */

/* Qman/Bman */
#define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
#define CONFIG_SYS_BMAN_NUM_PORTALS	10
#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
#else
#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
#endif
#define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
					 CONFIG_SYS_BMAN_CENA_SIZE)
#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
#define CONFIG_SYS_QMAN_NUM_PORTALS	10
#define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_QMAN_MEM_PHYS	0xff4200000ull
#else
#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
#endif
#define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
					  CONFIG_SYS_QMAN_CENA_SIZE)
#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08

#define CONFIG_SYS_DPAA_FMAN
/* Default address of microcode for the Linux Fman driver */
/*
 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 */
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)

#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#endif

#ifdef CONFIG_PCI
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_NET_MULTI

#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CONFIG_DOS_PARTITION
#endif	/* CONFIG_PCI */

/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
#define CONFIG_FSL_SATA

#define CONFIG_SYS_SATA_MAX_DEVICE	2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
#define CONFIG_SATA2
#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA

#define CONFIG_LBA48
#define CONFIG_CMD_SATA
#define CONFIG_DOS_PARTITION
#endif

#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_TBIPA_VALUE	8
#define CONFIG_MII		/* MII PHY management */
#define CONFIG_ETHPRIME		"FM1@DTSEC4"
#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
#endif

/*
 * Environment
 */
#define CONFIG_LOADS_ECHO		/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */

/*
 * Command line configuration.
 */
#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO

#ifdef CONFIG_PCI
#define CONFIG_CMD_PCI
#endif

/*
 * USB
 */
#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_HAS_FSL_MPH_USB

#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_EHCI_IS_TDI
#define CONFIG_SYS_USB_EVENT_POLL
 /* _VIA_CONTROL_EP  */
#endif

#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */

#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#endif

/*
 * Environment Configuration
 */
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000


#define CONFIG_BAUDRATE	115200

#define __USB_PHY_TYPE	utmi

#define	CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
"bank_intlv=cs0_cs1;"					\
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0"						\
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"			\
"consoledev=ttyS0\0"					\
"ramdiskaddr=2000000\0"					\
"fdtaddr=1e00000\0"					\
"bdev=sda3\0"

#define CONFIG_HDBOOT					\
"setenv bootargs root=/dev/$bdev rw "		\
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $loadaddr $bootfile;"			\
"tftp $fdtaddr $fdtfile;"			\
"bootm $loadaddr - $fdtaddr"

#define CONFIG_NFSBOOTCOMMAND			\
"setenv bootargs root=/dev/nfs rw "	\
"nfsroot=$serverip:$rootpath "		\
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $loadaddr $bootfile;"		\
"tftp $fdtaddr $fdtfile;"		\
"bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND				\
"setenv bootargs root=/dev/ram rw "		\
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $ramdiskaddr $ramdiskfile;"		\
"tftp $loadaddr $bootfile;"			\
"tftp $fdtaddr $fdtfile;"			\
"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT

#include <asm/fsl_secure_boot.h>

#ifdef CONFIG_SECURE_BOOT
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
87e29878 AF	1	/*
	2	* Based on corenet_ds.h
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
87e29878 AF	10	#define CONFIG_CYRUS
87e29878 AF	11
95390360	12	#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
87e29878 AF	13	#error Must call Cyrus CONFIG with a specific CPU enabled.
	14	#endif
	15
87e29878 AF	16	#define CONFIG_SDCARD
	17	#define CONFIG_FSL_SATA_V2
	18	#define CONFIG_PCIE3
	19	#define CONFIG_PCIE4
cefe11cd	20	#ifdef CONFIG_ARCH_P5020
87e29878 AF	21	#define CONFIG_SYS_FSL_RAID_ENGINE
	22	#define CONFIG_SYS_DPAA_RMAN
	23	#endif
	24	#define CONFIG_SYS_DPAA_PME
	25
	26	/*
	27	* Corenet DS style board configuration file
	28	*/
	29	#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
	30	#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
	31	#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
cefe11cd	32	#if defined(CONFIG_ARCH_P5020)
87e29878 AF	33	#define CONFIG_SYS_CLK_FREQ 133000000
87e29878 AF	34	#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
95390360	35	#elif defined(CONFIG_ARCH_P5040)
87e29878 AF	36	#define CONFIG_SYS_CLK_FREQ 100000000
	37	#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
	38	#endif
	39
87e29878	40	/* High Level Configuration Options */
87e29878 AF	41	#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
	42	#define CONFIG_MP /* support multiple processors */
	43
87e29878 AF	44	#define CONFIG_SYS_MMC_MAX_DEVICE 1
	45
	46	#ifndef CONFIG_SYS_TEXT_BASE
	47	#define CONFIG_SYS_TEXT_BASE 0xeff40000
	48	#endif
	49
	50	#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
	51	#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
	52	#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
b38eaec5 RD	53	#define CONFIG_PCIE1 /* PCIE controller 1 */
b38eaec5 RD	54	#define CONFIG_PCIE2 /* PCIE controller 2 */
87e29878 AF	55	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	56	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	57
87e29878 AF	58	#define CONFIG_ENV_OVERWRITE
	59
	60	#define CONFIG_SYS_NO_FLASH
	61
	62	#if defined(CONFIG_SDCARD)
	63	#define CONFIG_SYS_EXTRA_ENV_RELOC
	64	#define CONFIG_ENV_IS_IN_MMC
	65	#define CONFIG_FSL_FIXED_MMC_LOCATION
	66	#define CONFIG_SYS_MMC_ENV_DEV 0
	67	#define CONFIG_ENV_SIZE 0x2000
	68	#define CONFIG_ENV_OFFSET (512 * 1658)
	69	#endif
	70
	71	/*
	72	* These can be toggled for performance analysis, otherwise use default.
	73	*/
	74	#define CONFIG_SYS_CACHE_STASHING
	75	#define CONFIG_BACKSIDE_L2_CACHE
	76	#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
	77	#define CONFIG_BTB /* toggle branch predition */
	78	#define CONFIG_DDR_ECC
	79	#ifdef CONFIG_DDR_ECC
	80	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
	81	#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
	82	#endif
	83
	84	#define CONFIG_ENABLE_36BIT_PHYS
	85
	86	#ifdef CONFIG_PHYS_64BIT
	87	#define CONFIG_ADDR_MAP
	88	#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
	89	#endif
	90
	91	/* test POST memory test */
	92	#undef CONFIG_POST
	93	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
	94	#define CONFIG_SYS_MEMTEST_END 0x00400000
	95	#define CONFIG_SYS_ALT_MEMTEST
	96	#define CONFIG_PANIC_HANG /* do not reset board on panic */
	97
	98	/*
	99	* Config the L3 Cache as L3 SRAM
	100	*/
	101	#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
	102	#ifdef CONFIG_PHYS_64BIT
	103	#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull \| CONFIG_RAMBOOT_TEXT_BASE)
	104	#else
	105	#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
	106	#endif
	107	#define CONFIG_SYS_L3_SIZE (1024 << 10)
	108	#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
	109
	110	#ifdef CONFIG_PHYS_64BIT
	111	#define CONFIG_SYS_DCSRBAR 0xf0000000
	112	#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
	113	#endif
	114
	115	/*
	116	* DDR Setup
	117	*/
	118	#define CONFIG_VERY_BIG_RAM
	119	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
	120	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	121
122	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
123	#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
124
125	#define CONFIG_DDR_SPD
87e29878 AF	126
	127	#define CONFIG_SYS_SPD_BUS_NUM 1
	128	#define SPD_EEPROM_ADDRESS1 0x51
	129	#define SPD_EEPROM_ADDRESS2 0x52
	130	#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
	131
	132	/*
	133	* Local Bus Definitions
	134	*/
	135
	136	#define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */
	137	#ifdef CONFIG_PHYS_64BIT
	138	#define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull
	139	#else
	140	#define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE
	141	#endif
	142
	143	#define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */
	144	#ifdef CONFIG_PHYS_64BIT
	145	#define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull
	146	#else
	147	#define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE
	148	#endif
	149
	150	/* Set the local bus clock 1/16 of platform clock */
	151	#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 \| LCRR_EADC_1)
	152
	153	#define CONFIG_SYS_BR0_PRELIM \
	154	(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) \| BR_PS_16 \| BR_V)
	155	#define CONFIG_SYS_BR1_PRELIM \
	156	(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) \| BR_PS_16 \| BR_V)
	157
	158	#define CONFIG_SYS_OR0_PRELIM 0xfff00010
	159	#define CONFIG_SYS_OR1_PRELIM 0xfff00010
	160
87e29878 AF	161	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	162
	163	#if defined(CONFIG_RAMBOOT_PBL)
	164	#define CONFIG_SYS_RAMBOOT
	165	#endif
	166
	167	#define CONFIG_BOARD_EARLY_INIT_F
	168	#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
	169	#define CONFIG_MISC_INIT_R
	170
	171	#define CONFIG_HWCONFIG
	172
	173	/* define to use L1 as initial stack */
	174	#define CONFIG_L1_INIT_RAM
	175	#define CONFIG_SYS_INIT_RAM_LOCK
	176	#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
	177	#ifdef CONFIG_PHYS_64BIT
	178	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
	179	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
	180	/* The assembler doesn't like typecast */
	181	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	182	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) \| \
	183	CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
	184	#else
	185	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
	186	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
	187	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
	188	#endif
	189	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
	190
	191	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	192	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	193
	194	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
	195	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
	196
	197	/* Serial Port - controlled on board with jumper J8
	198	* open - index 2
	199	* shorted - index 1
	200	*/
	201	#define CONFIG_CONS_INDEX 1
87e29878 AF	202	#define CONFIG_SYS_NS16550_SERIAL
	203	#define CONFIG_SYS_NS16550_REG_SIZE 1
	204	#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
	205
	206	#define CONFIG_SYS_BAUDRATE_TABLE \
	207	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	208
	209	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
	210	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
	211	#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
	212	#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
	213
87e29878 AF	214	/* I2C */
	215	#define CONFIG_SYS_I2C
	216	#define CONFIG_SYS_I2C_FSL
	217	#define CONFIG_I2C_MULTI_BUS
	218	#define CONFIG_I2C_CMD_TREE
	219	#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */
	220	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	221	#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
	222	#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */
	223	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
	224	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
	225	#define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */
	226	#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F
	227	#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
	228	#define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */
	229	#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F
	230	#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
	231
	232	#define CONFIG_ID_EEPROM
	233	#define CONFIG_SYS_I2C_EEPROM_NXID
	234	#define CONFIG_SYS_EEPROM_BUS_NUM 0
	235	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	236	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
	237
	238	#define CONFIG_SYS_I2C_GENERIC_MAC
	239	#define CONFIG_SYS_I2C_MAC1_BUS 3
	240	#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
	241	#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
	242	#define CONFIG_SYS_I2C_MAC2_BUS 0
	243	#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
	244	#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
	245
	246	#define CONFIG_CMD_DATE 1
	247	#define CONFIG_RTC_MCP79411 1
	248	#define CONFIG_SYS_RTC_BUS_NUM 3
	249	#define CONFIG_SYS_I2C_RTC_ADDR 0x6f
	250
	251	/*
	252	* eSPI - Enhanced SPI
	253	*/
87e29878 AF	254
	255	/*
	256	* General PCI
	257	* Memory space is mapped 1-1, but I/O space must start from 0.
	258	*/
	259
	260	/* controller 1, direct to uli, tgtid 3, Base address 20000 */
	261	#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
	262	#ifdef CONFIG_PHYS_64BIT
	263	#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
	264	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
	265	#else
	266	#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
	267	#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
	268	#endif
	269	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
	270	#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
	271	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
	272	#ifdef CONFIG_PHYS_64BIT
	273	#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
	274	#else
	275	#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
	276	#endif
	277	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
	278
	279	/* controller 2, Slot 2, tgtid 2, Base address 201000 */
	280	#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
	281	#ifdef CONFIG_PHYS_64BIT
	282	#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
	283	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
	284	#else
	285	#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
	286	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
	287	#endif
	288	#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
	289	#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
	290	#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
	291	#ifdef CONFIG_PHYS_64BIT
	292	#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
	293	#else
	294	#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
	295	#endif
	296	#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
	297
	298	/* controller 3, Slot 1, tgtid 1, Base address 202000 */
	299	#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
	300	#ifdef CONFIG_PHYS_64BIT
	301	#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
	302	#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
	303	#else
	304	#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
	305	#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
	306	#endif
	307	#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
	308	#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
	309	#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
	310	#ifdef CONFIG_PHYS_64BIT
	311	#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
	312	#else
	313	#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
	314	#endif
	315	#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
	316
	317	/* controller 4, Base address 203000 */
318	#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
319	#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
320	#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
321	#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
322	#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
323	#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
324
325	/* Qman/Bman */
326	#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
327	#define CONFIG_SYS_BMAN_NUM_PORTALS 10
328	#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
329	#ifdef CONFIG_PHYS_64BIT
330	#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
331	#else
332	#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
333	#endif
334	#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
335	#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
336	#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
337	#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
338	#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
339	#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
340	CONFIG_SYS_BMAN_CENA_SIZE)
341	#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
342	#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
343	#define CONFIG_SYS_QMAN_NUM_PORTALS 10
344	#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
345	#ifdef CONFIG_PHYS_64BIT
346	#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
347	#else
348	#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
349	#endif
350	#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
351	#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
352	#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
353	#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
354	#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
355	#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
356	CONFIG_SYS_QMAN_CENA_SIZE)
357	#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
358	#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
359
360	#define CONFIG_SYS_DPAA_FMAN
361	/* Default address of microcode for the Linux Fman driver */
362	/*
363	* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
364	* about 825KB (1650 blocks), Env is stored after the image, and the env size is
365	* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
366	*/
367	#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
368	#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
369
370	#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
371	#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
372
373	#ifdef CONFIG_SYS_DPAA_FMAN
374	#define CONFIG_FMAN_ENET
375	#define CONFIG_PHY_MICREL
376	#define CONFIG_PHY_MICREL_KSZ9021
377	#endif
378
379	#ifdef CONFIG_PCI
380	#define CONFIG_PCI_INDIRECT_BRIDGE
87e29878 AF	381	#define CONFIG_NET_MULTI
	382
	383	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	384	#define CONFIG_DOS_PARTITION
	385	#endif /* CONFIG_PCI */
	386
	387	/* SATA */
	388	#ifdef CONFIG_FSL_SATA_V2
	389	#define CONFIG_LIBATA
	390	#define CONFIG_FSL_SATA
	391
	392	#define CONFIG_SYS_SATA_MAX_DEVICE 2
	393	#define CONFIG_SATA1
	394	#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
	395	#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
	396	#define CONFIG_SATA2
	397	#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
	398	#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
	399
	400	#define CONFIG_LBA48
	401	#define CONFIG_CMD_SATA
	402	#define CONFIG_DOS_PARTITION
87e29878 AF	403	#endif
	404
	405	#ifdef CONFIG_FMAN_ENET
	406	#define CONFIG_SYS_TBIPA_VALUE 8
	407	#define CONFIG_MII /* MII PHY management */
	408	#define CONFIG_ETHPRIME "FM1@DTSEC4"
	409	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
	410	#endif
	411
	412	/*
	413	* Environment
	414	*/
	415	#define CONFIG_LOADS_ECHO /* echo on for serial download */
	416	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
	417
	418	/*
	419	* Command line configuration.
	420	*/
87e29878	421	#define CONFIG_CMD_ERRATA
87e29878	422	#define CONFIG_CMD_IRQ
87e29878 AF	423	#define CONFIG_CMD_REGINFO
	424
	425	#ifdef CONFIG_PCI
	426	#define CONFIG_CMD_PCI
	427	#endif
	428
	429	/*
	430	* USB
	431	*/
	432	#define CONFIG_HAS_FSL_DR_USB
	433	#define CONFIG_HAS_FSL_MPH_USB
	434
	435	#if defined(CONFIG_HAS_FSL_DR_USB) \|\| defined(CONFIG_HAS_FSL_MPH_USB)
87e29878 AF	436	#define CONFIG_USB_EHCI
	437	#define CONFIG_USB_EHCI_FSL
	438	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
87e29878	439	#define CONFIG_EHCI_IS_TDI
87e29878 AF	440	#define CONFIG_SYS_USB_EVENT_POLL
87e29878 AF	441	/* _VIA_CONTROL_EP */
87e29878 AF	442	#endif
	443
	444	#ifdef CONFIG_MMC
	445	#define CONFIG_FSL_ESDHC
	446	#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
	447	#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
87e29878	448	#define CONFIG_GENERIC_MMC
87e29878 AF	449	#define CONFIG_DOS_PARTITION
	450	#endif
	451
	452	/*
	453	* Miscellaneous configurable options
	454	*/
	455	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	456	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	457	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	458	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
87e29878 AF	459	#ifdef CONFIG_CMD_KGDB
	460	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	461	#else
	462	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	463	#endif
	464	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	465	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	466	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	467
	468	/*
	469	* For booting Linux, the board info and command line data
	470	* have to be in the first 64 MB of memory, since this is
	471	* the maximum mapped by the Linux kernel during initialization.
	472	*/
	473	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
	474	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	475
	476	#ifdef CONFIG_CMD_KGDB
	477	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	478	#endif
	479
	480	/*
	481	* Environment Configuration
	482	*/
	483	#define CONFIG_ROOTPATH "/opt/nfsroot"
	484	#define CONFIG_BOOTFILE "uImage"
	485	#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
	486
	487	/* default location for tftp and bootm */
	488	#define CONFIG_LOADADDR 1000000
	489
87e29878 AF	490
	491	#define CONFIG_BAUDRATE 115200
	492
	493	#define __USB_PHY_TYPE utmi
	494
	495	#define CONFIG_EXTRA_ENV_SETTINGS \
	496	"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
	497	"bank_intlv=cs0_cs1;" \
	498	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
	499	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
	500	"netdev=eth0\0" \
	501	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	502	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
	503	"consoledev=ttyS0\0" \
	504	"ramdiskaddr=2000000\0" \
b24a4f62	505	"fdtaddr=1e00000\0" \
87e29878 AF	506	"bdev=sda3\0"
	507
	508	#define CONFIG_HDBOOT \
	509	"setenv bootargs root=/dev/$bdev rw " \
	510	"console=$consoledev,$baudrate $othbootargs;" \
	511	"tftp $loadaddr $bootfile;" \
	512	"tftp $fdtaddr $fdtfile;" \
	513	"bootm $loadaddr - $fdtaddr"
	514
	515	#define CONFIG_NFSBOOTCOMMAND \
	516	"setenv bootargs root=/dev/nfs rw " \
	517	"nfsroot=$serverip:$rootpath " \
	518	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	519	"console=$consoledev,$baudrate $othbootargs;" \
	520	"tftp $loadaddr $bootfile;" \
	521	"tftp $fdtaddr $fdtfile;" \
	522	"bootm $loadaddr - $fdtaddr"
	523
	524	#define CONFIG_RAMBOOTCOMMAND \
	525	"setenv bootargs root=/dev/ram rw " \
	526	"console=$consoledev,$baudrate $othbootargs;" \
	527	"tftp $ramdiskaddr $ramdiskfile;" \
	528	"tftp $loadaddr $bootfile;" \
	529	"tftp $fdtaddr $fdtfile;" \
	530	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	531
	532	#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
	533
	534	#include <asm/fsl_secure_boot.h>
	535
	536	#ifdef CONFIG_SECURE_BOOT
	537	#endif
	538
	539	#endif /* __CONFIG_H */