[people/ms/u-boot.git] / include / configs / da830evm.h

/*
 * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
 *
 * Based on davinci_dvevm.h. Original Copyrights follow:
 *
 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * Board
 */
#define CONFIG_DRIVER_TI_EMAC
#define CONFIG_USE_SPIFLASH

/*
 * SoC Configuration
 */
#define CONFIG_MACH_DAVINCI_DA830_EVM
#define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
#define CONFIG_SOC_DA830		/* TI DA830 SoC */
#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ		24000000
#define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TEXT_BASE		0xc1080000

/*
 * Memory Info
 */
#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
#define PHYS_SDRAM_1			0xc0000000 /* SDRAM Start */
#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
						(32 << 20))
#define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */

/*
 * Serial Driver info
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
#define CONFIG_BAUDRATE		115200		/* Default baud rate */

/*
 * I2C Configuration
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DAVINCI
#define CONFIG_SYS_DAVINCI_I2C_SPEED     25000 /* 100Kbps won't work, H/W bug */
#define CONFIG_SYS_DAVINCI_I2C_SLAVE     10 /* Bogus, master-only in U-Boot */

/*
 * I2C EEPROM definitions for catalyst 24W256 EEPROM chip
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20

/*
 * Network & Ethernet Configuration
 */
#ifdef CONFIG_DRIVER_TI_EMAC
#define CONFIG_MII
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT	10
#endif

/*
 * Flash & Environment
 */
#ifdef CONFIG_USE_NAND
#undef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_NAND_DAVINCI
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
#define CONFIG_ENV_OFFSET		(512 << 10)
#define CONFIG_ENV_SIZE			(10 << 10) /* 10KB */
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_CS		3
#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_MASK_CLE		0x10
#define CONFIG_SYS_NAND_MASK_ALE		0x8
#define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
#endif

#ifdef CONFIG_USE_NOR
#define CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* max number of flash banks */
#define CONFIG_SYS_FLASH_SECT_SZ	(64 << 10) /* 64KB */
#define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_SECT_SZ*3)
#define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
#define PHYS_FLASH_SIZE			(32 << 20) /* Flash size 32MB */
#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
#define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_FLASH_SECT_SZ
#define CONFIG_SYS_FLASH_SPL_ACCESS
#endif

#ifdef CONFIG_USE_SPIFLASH
#undef CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE			(16 << 10)
#define CONFIG_ENV_OFFSET		(256 << 10)
#define CONFIG_ENV_SECT_SIZE		4096
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SPI
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI0_BASE
#define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI0_CLKID)
#define CONFIG_SF_DEFAULT_SPEED		30000000
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

/*
 * USB configuration
 */
#define CONFIG_USB_DA8XX	/* Platform hookup to MUSB controller */
#define CONFIG_USB_MUSB_HCD

/*
 * U-Boot general configuration
 */
#undef CONFIG_MISC_INIT_R
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP
#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC

/*
 * Linux Information
 */
#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTARGS		"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
#define CONFIG_BOOTCOMMAND	""
#define CONFIG_BOOTDELAY	3

/*
 * U-Boot commands
 */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES

#ifdef CONFIG_CMD_BDI
#define CONFIG_CLOCKS
#endif

#ifndef CONFIG_DRIVER_TI_EMAC
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_PING
#endif

#ifdef CONFIG_USE_NAND
#define CONFIG_CMD_NAND
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#endif

#ifdef CONFIG_USE_SPIFLASH
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#endif

/* SD/MMC configuration */
#ifndef CONFIG_USE_NAND
#define CONFIG_MMC
#define CONFIG_DAVINCI_MMC_SD1
#define CONFIG_GENERIC_MMC
#define CONFIG_DAVINCI_MMC
#endif

/*
 * Enable MMC commands only when
 * MMC support is present
 */
#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX)
#define CONFIG_DOS_PARTITION	/* include support for FAT/storage */
#define CONFIG_CMD_FAT		/* include support for FAT cmd */
#endif

#ifdef CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
#endif

#if !defined(CONFIG_USE_NAND) && \
	!defined(CONFIG_USE_NOR) && \
	!defined(CONFIG_USE_SPIFLASH)
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE		(16 << 10)
#undef CONFIG_CMD_ENV
#endif

#ifdef CONFIG_USB_DA8XX

#ifdef CONFIG_USB_MUSB_HCD		/* include support for usb host */
#define CONFIG_CMD_USB		/* include support for usb cmd */

#define CONFIG_USB_STORAGE	/* MSC class support */
#define CONFIG_CMD_STORAGE	/* inclue support for usb-storage cmd */

#ifdef CONFIG_USB_KEYBOARD	/* HID class support */
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_PREBOOT "usb start"
#endif /* CONFIG_USB_KEYBOARD */

#endif /* CONFIG_USB_MUSB_HCD */

#ifdef CONFIG_USB_MUSB_UDC
/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"DA830EVM"
#endif /* CONFIG_USB_MUSB_UDC */

#endif /* CONFIG_USB_DA8XX */

#ifdef CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT		"nand0=davinci_nand.1"
#define PART_BOOT		"512k(bootloader)ro,"
#define PART_PARAMS		"512k(params)ro,"
#define PART_KERNEL		"4m(kernel),"
#define PART_REST		"-(filesystem)"
#define MTDPARTS_DEFAULT        \
	"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
#endif

#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/

/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR		\
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

#endif /* __CONFIG_H */
Commit	Line	Data
2819e136 SN	1	/*
	2	* Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
	3	*
	4	* Based on davinci_dvevm.h. Original Copyrights follow:
	5	*
	6	* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
2819e136 SN	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	/*
	15	* Board
	16	*/
37cffdad	17	#define CONFIG_DRIVER_TI_EMAC
516420aa	18	#define CONFIG_USE_SPIFLASH
2819e136 SN	19
	20	/*
	21	* SoC Configuration
	22	*/
	23	#define CONFIG_MACH_DAVINCI_DA830_EVM
2819e136	24	#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
68cd4a4c	25	#define CONFIG_SOC_DA830 /* TI DA830 SoC */
2819e136 SN	26	#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
	27	#define CONFIG_SYS_OSCIN_FREQ 24000000
	28	#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
	29	#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
2819e136	30	#define CONFIG_SKIP_LOWLEVEL_INIT
f760d14a	31	#define CONFIG_SYS_TEXT_BASE 0xc1080000
2819e136 SN	32
	33	/*
	34	* Memory Info
	35	*/
	36	#define CONFIG_SYS_MALLOC_LEN (0x10000 + 110241024) /* malloc() len */
f35d61ac	37	#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Start */
11a6fb79	38	#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
56fa45d5 SP	39	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
56fa45d5 SP	40	(32 << 20))
2819e136	41	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
2819e136 SN	42
	43	/*
	44	* Serial Driver info
	45	*/
	46	#define CONFIG_SYS_NS16550
	47	#define CONFIG_SYS_NS16550_SERIAL
	48	#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
	49	#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
	50	#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
	51	#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
	52	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
2819e136 SN	53
	54	/*
	55	* I2C Configuration
	56	*/
e8459dcc VA	57	#define CONFIG_SYS_I2C
	58	#define CONFIG_SYS_I2C_DAVINCI
	59	#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */
	60	#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
2819e136 SN	61
	62	/*
	63	* I2C EEPROM definitions for catalyst 24W256 EEPROM chip
	64	*/
	65	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	66	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	67	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
	68	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
	69
	70	/*
	71	* Network & Ethernet Configuration
	72	*/
	73	#ifdef CONFIG_DRIVER_TI_EMAC
	74	#define CONFIG_MII
2819e136 SN	75	#define CONFIG_BOOTP_DNS
	76	#define CONFIG_BOOTP_DNS2
	77	#define CONFIG_BOOTP_SEND_HOSTNAME
	78	#define CONFIG_NET_RETRY_COUNT 10
2819e136 SN	79	#endif
	80
	81	/*
	82	* Flash & Environment
	83	*/
	84	#ifdef CONFIG_USE_NAND
	85	#undef CONFIG_ENV_IS_IN_FLASH
	86	#define CONFIG_NAND_DAVINCI
	87	#define CONFIG_SYS_NO_FLASH
	88	#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
3a4e4392	89	#define CONFIG_ENV_OFFSET (512 << 10)
28375eb6 MH	90	#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */
28375eb6 MH	91	#define CONFIG_SYS_NAND_USE_FLASH_BBT
2819e136	92	#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
28375eb6	93	#define CONFIG_SYS_NAND_PAGE_2K
2819e136 SN	94	#define CONFIG_SYS_NAND_CS 3
2819e136 SN	95	#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
3a4e4392	96	#define CONFIG_SYS_NAND_PAGE_2K
34fa0706 EB	97	#define CONFIG_SYS_NAND_MASK_CLE 0x10
34fa0706 EB	98	#define CONFIG_SYS_NAND_MASK_ALE 0x8
2819e136	99	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
2819e136 SN	100	#endif
	101
	102	#ifdef CONFIG_USE_NOR
	103	#define CONFIG_ENV_IS_IN_FLASH
	104	#undef CONFIG_SYS_NO_FLASH
	105	#define CONFIG_SYS_FLASH_CFI_DRIVER
	106	#define CONFIG_SYS_FLASH_CFI
	107	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
	108	#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */
	109	#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3)
	110	#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
	111	#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */
	112	#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
	113	#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
	114	#define CONFIG_SYS_FLASH_SPL_ACCESS
	115	#endif
	116
	117	#ifdef CONFIG_USE_SPIFLASH
	118	#undef CONFIG_ENV_IS_IN_FLASH
	119	#undef CONFIG_ENV_IS_IN_NAND
	120	#define CONFIG_ENV_IS_IN_SPI_FLASH
	121	#define CONFIG_ENV_SIZE (16 << 10)
	122	#define CONFIG_ENV_OFFSET (256 << 10)
	123	#define CONFIG_ENV_SECT_SIZE 4096
	124	#define CONFIG_SYS_NO_FLASH
	125	#define CONFIG_SPI
2819e136 SN	126	#define CONFIG_SPI_FLASH_WINBOND
	127	#define CONFIG_DAVINCI_SPI
	128	#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE
	129	#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID)
516420aa NN	130	#define CONFIG_SF_DEFAULT_SPEED 30000000
516420aa NN	131	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
2819e136 SN	132	#endif
2819e136 SN	133
7b429288 AKG	134	/*
	135	* USB configuration
	136	*/
	137	#define CONFIG_USB_DA8XX /* Platform hookup to MUSB controller */
95de1e2f	138	#define CONFIG_USB_MUSB_HCD
2819e136 SN	139
	140	/*
	141	* U-Boot general configuration
	142	*/
2819e136 SN	143	#undef CONFIG_MISC_INIT_R
	144	#undef CONFIG_BOOTDELAY
	145	#define CONFIG_BOOTFILE "uImage" /* Boot file name */
2819e136 SN	146	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	147	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	148	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	149	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
11a6fb79	150	#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
2819e136 SN	151	#define CONFIG_VERSION_VARIABLE
	152	#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
	153	#define CONFIG_SYS_HUSH_PARSER
2819e136 SN	154	#define CONFIG_CMDLINE_EDITING
	155	#define CONFIG_SYS_LONGHELP
	156	#define CONFIG_CRC32_VERIFY
	157	#define CONFIG_MX_CYCLIC
	158
	159	/*
	160	* Linux Information
	161	*/
11a6fb79	162	#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
2819e136 SN	163	#define CONFIG_CMDLINE_TAG
	164	#define CONFIG_SETUP_MEMORY_TAGS
	165	#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
	166	#define CONFIG_BOOTCOMMAND ""
	167	#define CONFIG_BOOTDELAY 3
	168
	169	/*
	170	* U-Boot commands
	171	*/
2819e136 SN	172	#define CONFIG_CMD_ENV
	173	#define CONFIG_CMD_ASKENV
	174	#define CONFIG_CMD_DHCP
	175	#define CONFIG_CMD_DIAG
	176	#define CONFIG_CMD_MII
	177	#define CONFIG_CMD_PING
	178	#define CONFIG_CMD_SAVES
2819e136	179
8f5d4687 HM	180	#ifdef CONFIG_CMD_BDI
	181	#define CONFIG_CLOCKS
	182	#endif
	183
2819e136	184	#ifndef CONFIG_DRIVER_TI_EMAC
2819e136 SN	185	#undef CONFIG_CMD_DHCP
	186	#undef CONFIG_CMD_MII
	187	#undef CONFIG_CMD_PING
	188	#endif
	189
	190	#ifdef CONFIG_USE_NAND
2819e136 SN	191	#define CONFIG_CMD_NAND
	192	#define CONFIG_CMD_MTDPARTS
	193	#define CONFIG_MTD_PARTITIONS
3a4e4392	194	#define CONFIG_MTD_DEVICE
2819e136 SN	195	#endif
	196
	197	#ifdef CONFIG_USE_SPIFLASH
2819e136	198	#define CONFIG_CMD_SPI
516420aa	199	#define CONFIG_CMD_SF
2819e136 SN	200	#endif
2819e136 SN	201
03e08d7c VBM	202	/* SD/MMC configuration */
	203	#ifndef CONFIG_USE_NAND
	204	#define CONFIG_MMC
	205	#define CONFIG_DAVINCI_MMC_SD1
	206	#define CONFIG_GENERIC_MMC
	207	#define CONFIG_DAVINCI_MMC
	208	#endif
	209
	210	/*
	211	* Enable MMC commands only when
	212	* MMC support is present
	213	*/
	214	#if defined(CONFIG_MMC) \|\| defined(CONFIG_USB_DA8XX)
	215	#define CONFIG_DOS_PARTITION /* include support for FAT/storage */
	216	#define CONFIG_CMD_FAT /* include support for FAT cmd */
	217	#endif
	218
	219	#ifdef CONFIG_MMC
	220	#define CONFIG_CMD_MMC
	221	#define CONFIG_CMD_EXT2
	222	#endif
	223
2819e136 SN	224	#if !defined(CONFIG_USE_NAND) && \
	225	!defined(CONFIG_USE_NOR) && \
	226	!defined(CONFIG_USE_SPIFLASH)
	227	#define CONFIG_ENV_IS_NOWHERE
	228	#define CONFIG_SYS_NO_FLASH
	229	#define CONFIG_ENV_SIZE (16 << 10)
2819e136 SN	230	#undef CONFIG_CMD_ENV
	231	#endif
	232
	233	#ifdef CONFIG_USB_DA8XX
2819e136	234
95de1e2f	235	#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */
7b429288 AKG	236	#define CONFIG_CMD_USB /* include support for usb cmd */
	237
	238	#define CONFIG_USB_STORAGE /* MSC class support */
	239	#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
7b429288 AKG	240
	241	#ifdef CONFIG_USB_KEYBOARD /* HID class support */
	242	#define CONFIG_SYS_USB_EVENT_POLL
	243	#define CONFIG_PREBOOT "usb start"
	244	#endif /* CONFIG_USB_KEYBOARD */
	245
95de1e2f	246	#endif /* CONFIG_USB_MUSB_HCD */
7b429288	247
95de1e2f	248	#ifdef CONFIG_USB_MUSB_UDC
7b429288 AKG	249	/* USB device configuration */
	250	#define CONFIG_USB_DEVICE 1
	251	#define CONFIG_USB_TTY 1
	252	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	253	/* Change these to suit your needs */
	254	#define CONFIG_USBD_VENDORID 0x0451
	255	#define CONFIG_USBD_PRODUCTID 0x5678
	256	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	257	#define CONFIG_USBD_PRODUCT_NAME "DA830EVM"
95de1e2f	258	#endif /* CONFIG_USB_MUSB_UDC */
7b429288 AKG	259
7b429288 AKG	260	#endif /* CONFIG_USB_DA8XX */
3a4e4392 NT	261
	262	#ifdef CONFIG_MTD_PARTITIONS
	263	#define MTDIDS_DEFAULT "nand0=davinci_nand.1"
	264	#define PART_BOOT "512k(bootloader)ro,"
	265	#define PART_PARAMS "512k(params)ro,"
	266	#define PART_KERNEL "4m(kernel),"
	267	#define PART_REST "-(filesystem)"
	268	#define MTDPARTS_DEFAULT \
	269	"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
	270	#endif
	271
f35d61ac NT	272	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
	273
	274	/* additions for new relocation code, must be added to all boards */
	275	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	276	#define CONFIG_SYS_INIT_SP_ADDR \
	277	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
	278
2819e136	279	#endif /* __CONFIG_H */