[people/ms/u-boot.git] / include / configs / display5.h

/*
 * Copyright (C) 2017
 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

/* Falcon Mode */
#define CONFIG_CMD_SPL
#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
#define CONFIG_CMD_SPL_WRITE_SIZE	(44 * SZ_1K)

/* Falcon Mode - MMC support */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x3F00
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	\
	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x100	/* 128KiB */

/*
 * display5 SPI-NOR memory layout
 *
 * The definition can be found in Kconfig's
 * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
 *
 * 0x000000 - 0x020000 : SPI.SPL (128KiB)
 * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
 * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
 * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
 * 0x140000 - 0x940000 : SPI.fitImage-recovery (8MiB)
 * 0x940000 - 0xD40000 : SPI.swupdate-kernel-FIT (4MiB)
 * 0xD40000 - 0x1540000 : SPI.swupdate-initramfs  (8MiB)
 */

#ifndef CONFIG_SPL_BUILD
#define CONFIG_MTD_DEVICE
#define CONFIG_SPI_FLASH_MTD
#define CONFIG_MTD_PARTITIONS
#endif

/* Below values are "dummy" - only to avoid build break */
#define CONFIG_SYS_SPI_KERNEL_OFFS      0x150000
#define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
#define CONFIG_SYS_SPI_ARGS_SIZE        0x10000

#include "imx6_spl.h"
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
#define CONFIG_SPL_SPI_LOAD

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(16 * 1024 * 1024)
#define CONFIG_MISC_INIT_R

/*#define CONFIG_MXC_UART*/
#define CONFIG_MXC_UART_BASE		UART5_BASE

/* SPI NOR Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		1
#define CONFIG_SF_DEFAULT_CS		(0 | (IMX_GPIO_NR(5, 29) << 8))
#define CONFIG_SF_DEFAULT_SPEED		50000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_EDID
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2

/* Ethernet */
#ifdef CONFIG_FEC_MXC
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0
#define CONFIG_MII
#endif

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_SUPPORT_EMMC_BOOT

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200

#ifndef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "run boot_mmc"
#endif

#define PARTS_DEFAULT \
	/* Linux partitions */ \
	"partitions=" \
	"uuid_disk=${uuid_gpt_disk};" \
	"name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
	"name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
	"name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
	"name=rootfs2,size=1528M,uuid=${uuid_gpt_rootfs2};" \
	"name=data,size=-,uuid=${uuid_gpt_data}\0"

#define FACTORY_PROCEDURE \
	"echo '#######################';" \
	"echo '# Factory Boot        #';" \
	"echo '#######################';" \
	"env default -a;" \
	"saveenv;" \
	"gpt write mmc ${mmcdev} ${partitions};" \
	"run tftp_sf_SPL;" \
	"run tftp_sf_uboot;" \
	TFTP_UPDATE_KERNEL \
	"run tftp_sf_fitImg_recovery;" \
	"run tftp_sf_fitImg_SWU;" \
	"run tftp_sf_initramfs_SWU;" \
	TFTP_UPDATE_ROOTFS \
	"echo '#######################';" \
	"echo '# END - OK            #';" \
	"echo '#######################';" \
	"setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
	"setenv boot_os 'n';" \
	"saveenv;" \
	"reset;"

#define SWUPDATE_RECOVERY_PROCEDURE \
	"echo '#######################';" \
	"echo '# RECOVERY SWUupdate  #';" \
	"echo '#######################';" \
	"setenv loadaddr_swu_initramfs 0x14000000;" \
	"setenv bootargs console=${console} " \
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
		":${hostname}::off root=/dev/ram rw;" \
	"sf probe;" \
	"sf read ${loadaddr} swu-kernel;" \
	"sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
	"bootm ${loadaddr} ${loadaddr_swu_initramfs};"

#define KERNEL_RECOVERY_PROCEDURE \
	"echo '#######################';" \
	"echo '# RECOVERY KERNEL IMG #';" \
	"echo '#######################';" \
	"sf probe;" \
	"sf read ${loadaddr} lin-recovery;" \
	"bootm;"

#define SETUP_BOOTARGS \
	"run set_rootfs_part;" \
	"setenv bootargs ${bootargs} console=${console} "	  \
		      "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
		      "rootwait rootfstype=ext4 rw; " \
	"run set_kernel_part;" \
	"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
	"mmc read ${loadaddr} ${lba_start} 0x2000; " \
	"setenv fdt_conf imx6q-${board}-${display}.dtb; "

/* All the numbers are in LBAs */
#define __TFTP_UPDATE_KERNEL \
	"tftp_mmc_fitImg=" \
	   "if test ! -n ${kernel_part}; then " \
	       "setenv kernel_part ${kernel_part_active};" \
	   "fi;" \
	   "if tftp ${loadaddr} ${kernel_file}; then " \
	       "setexpr fw_sz ${filesize} / 0x200; " \
	       "setexpr fw_sz ${fw_sz} + 1; "  \
	       "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
	       "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
	   "; fi\0" \

#define TFTP_UPDATE_KERNEL \
	"setenv kernel_part ${kernel_part_active};" \
	"run tftp_mmc_fitImg;" \
	"setenv kernel_part ${kernel_part_backup};" \
	"run tftp_mmc_fitImg;" \

#define __TFTP_UPDATE_ROOTFS \
	"tftp_mmc_rootfs=" \
	   "if test ! -n ${rootfs_part}; then " \
	       "setenv rootfs_part ${rootfs_part_active};" \
	   "fi;" \
	   "if tftp ${loadaddr} ${rootfs_file}; then " \
	       "setexpr fw_sz ${filesize} / 0x200; " \
	       "setexpr fw_sz ${fw_sz} + 1; "  \
	       "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
	       "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
	   "; fi\0" \

/* To save some considerable time, we only once download the rootfs image */
/* and store it on 'active' and 'backup' rootfs partitions */
#define TFTP_UPDATE_ROOTFS \
	"setenv rootfs_part ${rootfs_part_active};" \
	"run tftp_mmc_rootfs;" \
	"part start mmc ${mmcdev} ${rootfs_part_backup} lba_start;" \
	"mmc write ${loadaddr} ${lba_start} ${fw_sz};" \

#define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
	"tftp_sf_fitImg_SWU=" \
	    "if tftp ${loadaddr} ${kernel_file}; then " \
		"sf probe;" \
		"sf erase swu-kernel +${filesize};" \
		"sf write ${loadaddr} swu-kernel ${filesize};" \
	"; fi\0"	  \

#define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
	"swu_initramfs_file=swupdate-image-display5.ext3.gz.u-boot\0" \
	"tftp_sf_initramfs_SWU=" \
	    "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
		"sf probe;" \
		"sf erase swu-initramfs +${filesize};" \
		"sf write ${loadaddr} swu-initramfs ${filesize};" \
	"; fi\0"	  \

#define TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
	"kernel_recovery_file=fitImage-initramfs\0" \
	"tftp_sf_fitImg_recovery=" \
	    "if tftp ${loadaddr} ${kernel_recovery_file}; then " \
		"sf probe;" \
		"sf erase lin-recovery +${filesize};" \
		"sf write ${loadaddr} lin-recovery ${filesize};" \
	"; fi\0"	  \

#define TFTP_UPDATE_BOOTLOADER \
	"ubootfile=u-boot.img\0" \
	"ubootfileSPL=SPL\0" \
	"tftp_sf_uboot=" \
	    "if tftp ${loadaddr} ${ubootfile}; then " \
		"sf probe;" \
		"sf erase u-boot +${filesize};" \
		"sf write ${loadaddr} u-boot ${filesize}" \
	"; fi\0"	  \
	"tftp_sf_SPL="	  \
	    "if tftp ${loadaddr} ${ubootfileSPL}; then " \
		"sf probe;" \
		"setexpr uboot_SPL_size ${filesize} + 0x400;" \
		"sf erase 0x0 +${uboot_SPL_size};" \
		"sf write ${loadaddr} 0x400 ${filesize};" \
	"fi\0" \

#define CONFIG_EXTRA_ENV_SETTINGS	  \
	PARTS_DEFAULT \
	"display=tianma-tm070-800x480\0" \
	"board=display5\0" \
	"mmcdev=0\0" \
	"altbootcmd=run recovery\0" \
	"bootdelay=1\0" \
	"baudrate=115200\0" \
	"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
	"factory=" FACTORY_PROCEDURE "\0" \
	"bootlimit=3\0" \
	"ethact=FEC\0" \
	"netdev=eth0\0" \
	"boot_os=y\0" \
	"hostname=display5\0" \
	"loadaddr=0x12000000\0" \
	"fdtaddr=0x12800000\0" \
	"console=ttymxc4,115200 quiet\0" \
	"fdtfile=imx6q-display5.dtb\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"kernel_file=fitImage\0" \
	"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
	"download_kernel=" \
		"tftpboot ${loadaddr} ${kernel_file};\0" \
	"boot_kernel_recovery=" KERNEL_RECOVERY_PROCEDURE "\0" \
	"boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
	"recovery=" \
	"if test ${BOOT_FROM_RECOVERY} = SWU; then " \
	     "echo BOOT: RECOVERY: SWU;" \
	     "run boot_swu_recovery;" \
	"else " \
	     "echo BOOT: RECOVERY: Linux;" \
	     "run boot_kernel_recovery;" \
	"fi\0" \
	"boot_tftp=" \
	"if run download_kernel; then "	  \
	     "setenv bootargs console=${console} " \
	     "root=/dev/mmcblk0p2 rootwait;" \
	     "bootm ${loadaddr} - ${fdtaddr};" \
	"fi\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	    "${hostname}:eth0:on"	  \
	"\0"	  \
	"nfsargs=setenv bootargs " \
	"root=/dev/nfs rw "	  \
	"nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
	"\0" \
	"rootpath=/srv/tftp/DISP5/rootfs\0" \
	"boot_nfs=" \
	"if run download_kernel; then "	  \
	     "run nfsargs;"	  \
	     "run addip;"	  \
	     "setenv bootargs ${bootargs} console=${console};"	  \
	     "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
	     "bootm ${loadaddr}#conf@${fdt_conf};" \
	"fi\0" \
	"falcon_setup=" \
	"if mmc dev ${mmcdev}; then "	  \
	     SETUP_BOOTARGS \
	     "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
	     "setexpr fw_sz ${fdtargslen} / 0x200; " \
	     "setexpr fw_sz ${fw_sz} + 1; "  \
	     "mmc write ${fdtargsaddr} " \
	     __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
	"fi\0" \
	"boot_mmc=" \
	"if mmc dev ${mmcdev}; then "	  \
	     SETUP_BOOTARGS \
	     "bootm ${loadaddr}#conf@${fdt_conf};" \
	"fi\0" \
	"set_kernel_part=" \
	"if test ${BOOT_FROM} = ACTIVE; then " \
	     "setenv kernel_part ${kernel_part_active};" \
	     "echo BOOT: ACTIVE;" \
	"else if test ${BOOT_FROM} = BACKUP; then " \
	     "setenv kernel_part ${kernel_part_backup};" \
	     "echo BOOT: BACKUP;" \
	"else " \
	     "run recovery;" \
	"fi;fi\0" \
	"set_rootfs_part=" \
	"if test ${BOOT_FROM} = ACTIVE; then " \
	     "setenv rootfs_part ${rootfs_part_active};" \
	"else if test ${BOOT_FROM} = BACKUP; then " \
	     "setenv rootfs_part ${rootfs_part_backup};" \
	"else " \
	     "run recovery;" \
	"fi;fi\0" \
	"BOOT_FROM=ACTIVE\0" \
	"BOOT_FROM_RECOVERY=Linux\0" \
	TFTP_UPDATE_BOOTLOADER \
	"kernel_part_active=1\0" \
	"kernel_part_backup=3\0" \
	__TFTP_UPDATE_KERNEL \
	"rootfs_part_active=2\0" \
	"rootfs_part_backup=4\0" \
	"rootfs_file=core-image-lwn-display5.ext4\0" \
	__TFTP_UPDATE_ROOTFS \
	TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
	TFTP_UPDATE_RECOVERY_SWU_KERNEL \
	TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
	"\0" \

/* Miscellaneous configurable options */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE		2048

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		32
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_STANDALONE_LOAD_ADDR	0x10001000
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM

#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE

/* ENV config */
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE		(SZ_64K)
/* The 0x120000 value corresponds to above SPI-NOR memory MAP */
#define CONFIG_ENV_OFFSET		(0x120000)
#define CONFIG_ENV_SECT_SIZE		(SZ_64K)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
						CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
#endif /* __CONFIG_H */
Commit	Line	Data
a3eec24a LM	1	/*
	2	* Copyright (C) 2017
	3	* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	#include "mx6_common.h"
	12
	13	/* Falcon Mode */
	14	#define CONFIG_CMD_SPL
	15	#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
	16	#define CONFIG_CMD_SPL_WRITE_SIZE (44 * SZ_1K)
	17
	18	/* Falcon Mode - MMC support */
	19	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x3F00
	20	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS \
	21	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
	22	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x100 /* 128KiB */
	23
	24	/*
	25	* display5 SPI-NOR memory layout
	26	*
	27	* The definition can be found in Kconfig's
	28	* CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
	29	*
	30	* 0x000000 - 0x020000 : SPI.SPL (128KiB)
	31	* 0x020000 - 0x120000 : SPI.u-boot (1MiB)
	32	* 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
	33	* 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
	34	* 0x140000 - 0x940000 : SPI.fitImage-recovery (8MiB)
	35	* 0x940000 - 0xD40000 : SPI.swupdate-kernel-FIT (4MiB)
	36	* 0xD40000 - 0x1540000 : SPI.swupdate-initramfs (8MiB)
	37	*/
	38
	39	#ifndef CONFIG_SPL_BUILD
	40	#define CONFIG_MTD_DEVICE
	41	#define CONFIG_SPI_FLASH_MTD
	42	#define CONFIG_MTD_PARTITIONS
	43	#endif
	44
	45	/* Below values are "dummy" - only to avoid build break */
	46	#define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000
	47	#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
	48	#define CONFIG_SYS_SPI_ARGS_SIZE 0x10000
	49
	50	#include "imx6_spl.h"
	51	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
	52	#define CONFIG_SPL_SPI_LOAD
	53
	54	#define CONFIG_CMDLINE_TAG
	55	#define CONFIG_SETUP_MEMORY_TAGS
	56	#define CONFIG_INITRD_TAG
	57	#define CONFIG_REVISION_TAG
	58
	59	/* Size of malloc() pool */
	60	#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
	61	#define CONFIG_MISC_INIT_R
	62
	63	/#define CONFIG_MXC_UART/
	64	#define CONFIG_MXC_UART_BASE UART5_BASE
65
66	/* SPI NOR Flash */
67	#ifdef CONFIG_CMD_SF
68	#define CONFIG_MXC_SPI
69	#define CONFIG_SF_DEFAULT_BUS 1
70	#define CONFIG_SF_DEFAULT_CS (0 \| (IMX_GPIO_NR(5, 29) << 8))
71	#define CONFIG_SF_DEFAULT_SPEED 50000000
72	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
73	#endif
74
75	/* I2C Configs */
76	#define CONFIG_SYS_I2C
77	#define CONFIG_SYS_I2C_MXC
78	#define CONFIG_SYS_I2C_MXC_I2C1
79	#define CONFIG_SYS_I2C_MXC_I2C2
80	#define CONFIG_SYS_I2C_MXC_I2C3
81	#define CONFIG_I2C_MULTI_BUS
82	#define CONFIG_SYS_I2C_SPEED 100000
83	#define CONFIG_I2C_EDID
84	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
85
86	/* Ethernet */
87	#ifdef CONFIG_FEC_MXC
88	#define IMX_FEC_BASE ENET_BASE_ADDR
89	#define CONFIG_FEC_XCV_TYPE RGMII
90	#define CONFIG_ETHPRIME "FEC"
91	#define CONFIG_FEC_MXC_PHYADDR 0
92	#define CONFIG_MII
93	#endif
94
95	/* MMC Configs */
96	#define CONFIG_FSL_ESDHC
97	#define CONFIG_FSL_USDHC
98	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
99	#define CONFIG_SYS_FSL_USDHC_NUM 2
100	#define CONFIG_SUPPORT_EMMC_BOOT
101
102	/* allow to overwrite serial and ethaddr */
103	#define CONFIG_ENV_OVERWRITE
104	#define CONFIG_BAUDRATE 115200
105
106	#ifndef CONFIG_BOOTCOMMAND
107	#define CONFIG_BOOTCOMMAND "run boot_mmc"
108	#endif
109
110	#define PARTS_DEFAULT \
111	/* Linux partitions */ \
112	"partitions=" \
113	"uuid_disk=${uuid_gpt_disk};" \
114	"name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
115	"name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
116	"name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
117	"name=rootfs2,size=1528M,uuid=${uuid_gpt_rootfs2};" \
118	"name=data,size=-,uuid=${uuid_gpt_data}\0"
119
120	#define FACTORY_PROCEDURE \
121	"echo '#######################';" \
122	"echo '# Factory Boot #';" \
123	"echo '#######################';" \
124	"env default -a;" \
125	"saveenv;" \
126	"gpt write mmc ${mmcdev} ${partitions};" \
127	"run tftp_sf_SPL;" \
128	"run tftp_sf_uboot;" \
129	TFTP_UPDATE_KERNEL \
130	"run tftp_sf_fitImg_recovery;" \
131	"run tftp_sf_fitImg_SWU;" \
132	"run tftp_sf_initramfs_SWU;" \
133	TFTP_UPDATE_ROOTFS \
134	"echo '#######################';" \
135	"echo '# END - OK #';" \
136	"echo '#######################';" \
137	"setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
138	"setenv boot_os 'n';" \
139	"saveenv;" \
140	"reset;"
141
142	#define SWUPDATE_RECOVERY_PROCEDURE \
143	"echo '#######################';" \
144	"echo '# RECOVERY SWUupdate #';" \
145	"echo '#######################';" \
146	"setenv loadaddr_swu_initramfs 0x14000000;" \
147	"setenv bootargs console=${console} " \
148	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
149	":${hostname}::off root=/dev/ram rw;" \
150	"sf probe;" \
151	"sf read ${loadaddr} swu-kernel;" \
152	"sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
153	"bootm ${loadaddr} ${loadaddr_swu_initramfs};"
154
155	#define KERNEL_RECOVERY_PROCEDURE \
156	"echo '#######################';" \
157	"echo '# RECOVERY KERNEL IMG #';" \
158	"echo '#######################';" \
159	"sf probe;" \
160	"sf read ${loadaddr} lin-recovery;" \
161	"bootm;"
162
163	#define SETUP_BOOTARGS \
164	"run set_rootfs_part;" \
165	"setenv bootargs ${bootargs} console=${console} " \
166	"root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
167	"rootwait rootfstype=ext4 rw; " \
168	"run set_kernel_part;" \
169	"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
170	"mmc read ${loadaddr} ${lba_start} 0x2000; " \
171	"setenv fdt_conf imx6q-${board}-${display}.dtb; "
172
173	/* All the numbers are in LBAs */
174	#define __TFTP_UPDATE_KERNEL \
175	"tftp_mmc_fitImg=" \
176	"if test ! -n ${kernel_part}; then " \
177	"setenv kernel_part ${kernel_part_active};" \
178	"fi;" \
179	"if tftp ${loadaddr} ${kernel_file}; then " \
180	"setexpr fw_sz ${filesize} / 0x200; " \
181	"setexpr fw_sz ${fw_sz} + 1; " \
182	"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
183	"mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
184	"; fi\0" \
185
186	#define TFTP_UPDATE_KERNEL \
187	"setenv kernel_part ${kernel_part_active};" \
188	"run tftp_mmc_fitImg;" \
189	"setenv kernel_part ${kernel_part_backup};" \
190	"run tftp_mmc_fitImg;" \
191
192	#define __TFTP_UPDATE_ROOTFS \
193	"tftp_mmc_rootfs=" \
194	"if test ! -n ${rootfs_part}; then " \
195	"setenv rootfs_part ${rootfs_part_active};" \
196	"fi;" \
197	"if tftp ${loadaddr} ${rootfs_file}; then " \
198	"setexpr fw_sz ${filesize} / 0x200; " \
199	"setexpr fw_sz ${fw_sz} + 1; " \
200	"part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
201	"mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
202	"; fi\0" \
203
204	/* To save some considerable time, we only once download the rootfs image */
205	/* and store it on 'active' and 'backup' rootfs partitions */
206	#define TFTP_UPDATE_ROOTFS \
207	"setenv rootfs_part ${rootfs_part_active};" \
208	"run tftp_mmc_rootfs;" \
209	"part start mmc ${mmcdev} ${rootfs_part_backup} lba_start;" \
210	"mmc write ${loadaddr} ${lba_start} ${fw_sz};" \
211
212	#define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
213	"tftp_sf_fitImg_SWU=" \
214	"if tftp ${loadaddr} ${kernel_file}; then " \
215	"sf probe;" \
216	"sf erase swu-kernel +${filesize};" \
217	"sf write ${loadaddr} swu-kernel ${filesize};" \
218	"; fi\0" \
219
220	#define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
221	"swu_initramfs_file=swupdate-image-display5.ext3.gz.u-boot\0" \
222	"tftp_sf_initramfs_SWU=" \
223	"if tftp ${loadaddr} ${swu_initramfs_file}; then " \
224	"sf probe;" \
225	"sf erase swu-initramfs +${filesize};" \
226	"sf write ${loadaddr} swu-initramfs ${filesize};" \
227	"; fi\0" \
228
229	#define TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
230	"kernel_recovery_file=fitImage-initramfs\0" \
231	"tftp_sf_fitImg_recovery=" \
232	"if tftp ${loadaddr} ${kernel_recovery_file}; then " \
233	"sf probe;" \
234	"sf erase lin-recovery +${filesize};" \
235	"sf write ${loadaddr} lin-recovery ${filesize};" \
236	"; fi\0" \
237
238	#define TFTP_UPDATE_BOOTLOADER \
239	"ubootfile=u-boot.img\0" \
240	"ubootfileSPL=SPL\0" \
241	"tftp_sf_uboot=" \
242	"if tftp ${loadaddr} ${ubootfile}; then " \
243	"sf probe;" \
244	"sf erase u-boot +${filesize};" \
245	"sf write ${loadaddr} u-boot ${filesize}" \
246	"; fi\0" \
247	"tftp_sf_SPL=" \
248	"if tftp ${loadaddr} ${ubootfileSPL}; then " \
249	"sf probe;" \
250	"setexpr uboot_SPL_size ${filesize} + 0x400;" \
251	"sf erase 0x0 +${uboot_SPL_size};" \
252	"sf write ${loadaddr} 0x400 ${filesize};" \
253	"fi\0" \
254
255	#define CONFIG_EXTRA_ENV_SETTINGS \
256	PARTS_DEFAULT \
257	"display=tianma-tm070-800x480\0" \
258	"board=display5\0" \
259	"mmcdev=0\0" \
260	"altbootcmd=run recovery\0" \
261	"bootdelay=1\0" \
262	"baudrate=115200\0" \
263	"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
264	"factory=" FACTORY_PROCEDURE "\0" \
265	"bootlimit=3\0" \
266	"ethact=FEC\0" \
267	"netdev=eth0\0" \
268	"boot_os=y\0" \
269	"hostname=display5\0" \
270	"loadaddr=0x12000000\0" \
271	"fdtaddr=0x12800000\0" \
272	"console=ttymxc4,115200 quiet\0" \
273	"fdtfile=imx6q-display5.dtb\0" \
274	"fdt_high=0xffffffff\0" \
275	"initrd_high=0xffffffff\0" \
276	"kernel_file=fitImage\0" \
277	"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
278	"download_kernel=" \
279	"tftpboot ${loadaddr} ${kernel_file};\0" \
280	"boot_kernel_recovery=" KERNEL_RECOVERY_PROCEDURE "\0" \
281	"boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
282	"recovery=" \
283	"if test ${BOOT_FROM_RECOVERY} = SWU; then " \
284	"echo BOOT: RECOVERY: SWU;" \
285	"run boot_swu_recovery;" \
286	"else " \
287	"echo BOOT: RECOVERY: Linux;" \
288	"run boot_kernel_recovery;" \
289	"fi\0" \
290	"boot_tftp=" \
291	"if run download_kernel; then " \
292	"setenv bootargs console=${console} " \
293	"root=/dev/mmcblk0p2 rootwait;" \
294	"bootm ${loadaddr} - ${fdtaddr};" \
295	"fi\0" \
296	"addip=setenv bootargs ${bootargs} " \
297	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
298	"${hostname}:eth0:on" \
299	"\0" \
300	"nfsargs=setenv bootargs " \
301	"root=/dev/nfs rw " \
302	"nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
303	"\0" \
304	"rootpath=/srv/tftp/DISP5/rootfs\0" \
305	"boot_nfs=" \
306	"if run download_kernel; then " \
307	"run nfsargs;" \
308	"run addip;" \
309	"setenv bootargs ${bootargs} console=${console};" \
310	"setenv fdt_conf imx6q-${board}-${display}.dtb; " \
311	"bootm ${loadaddr}#conf@${fdt_conf};" \
312	"fi\0" \
313	"falcon_setup=" \
314	"if mmc dev ${mmcdev}; then " \
315	SETUP_BOOTARGS \
316	"spl export fdt ${loadaddr}#conf@${fdt_conf};" \
317	"setexpr fw_sz ${fdtargslen} / 0x200; " \
318	"setexpr fw_sz ${fw_sz} + 1; " \
319	"mmc write ${fdtargsaddr} " \
320	__stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
321	"fi\0" \
322	"boot_mmc=" \
323	"if mmc dev ${mmcdev}; then " \
324	SETUP_BOOTARGS \
325	"bootm ${loadaddr}#conf@${fdt_conf};" \
326	"fi\0" \
327	"set_kernel_part=" \
328	"if test ${BOOT_FROM} = ACTIVE; then " \
329	"setenv kernel_part ${kernel_part_active};" \
330	"echo BOOT: ACTIVE;" \
331	"else if test ${BOOT_FROM} = BACKUP; then " \
332	"setenv kernel_part ${kernel_part_backup};" \
333	"echo BOOT: BACKUP;" \
334	"else " \
335	"run recovery;" \
336	"fi;fi\0" \
337	"set_rootfs_part=" \
338	"if test ${BOOT_FROM} = ACTIVE; then " \
339	"setenv rootfs_part ${rootfs_part_active};" \
340	"else if test ${BOOT_FROM} = BACKUP; then " \
341	"setenv rootfs_part ${rootfs_part_backup};" \
342	"else " \
343	"run recovery;" \
344	"fi;fi\0" \
345	"BOOT_FROM=ACTIVE\0" \
346	"BOOT_FROM_RECOVERY=Linux\0" \
347	TFTP_UPDATE_BOOTLOADER \
348	"kernel_part_active=1\0" \
349	"kernel_part_backup=3\0" \
350	__TFTP_UPDATE_KERNEL \
351	"rootfs_part_active=2\0" \
352	"rootfs_part_backup=4\0" \
353	"rootfs_file=core-image-lwn-display5.ext4\0" \
354	__TFTP_UPDATE_ROOTFS \
355	TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
356	TFTP_UPDATE_RECOVERY_SWU_KERNEL \
357	TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
358	"\0" \
359
360	/* Miscellaneous configurable options */
361	#undef CONFIG_SYS_CBSIZE
362	#define CONFIG_SYS_CBSIZE 2048
363
364	/* Print Buffer Size */
365	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
366	sizeof(CONFIG_SYS_PROMPT) + 16)
367	#define CONFIG_SYS_MAXARGS 32
368	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
369
370	#define CONFIG_STANDALONE_LOAD_ADDR 0x10001000
371	#define CONFIG_SYS_HZ 1000
372
373	/* Physical Memory Map */
374	#define CONFIG_NR_DRAM_BANKS 1
375	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
376	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
377
378	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
379	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
380
381	#define CONFIG_SYS_INIT_SP_OFFSET \
382	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
383	#define CONFIG_SYS_INIT_SP_ADDR \
384	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
385
386	/* Commands */
387	#define CONFIG_MTD_PARTITIONS
388	#define CONFIG_MTD_DEVICE
389
390	/* ENV config */
391	#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
392	#define CONFIG_ENV_SIZE (SZ_64K)
393	/* The 0x120000 value corresponds to above SPI-NOR memory MAP */
394	#define CONFIG_ENV_OFFSET (0x120000)
395	#define CONFIG_ENV_SECT_SIZE (SZ_64K)
396	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
397	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
398	CONFIG_ENV_SECT_SIZE)
399	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
400
401	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
402	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
403	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
404	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
405	#endif
406
407	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
408	#endif /* __CONFIG_H */