[people/ms/u-boot.git] / include / configs / dlvision-10g.h

/*
 * (C) Copyright 2010
 * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_405EP		1	/* this is a PPC405 CPU */
#define CONFIG_DLVISION_10G	1	/*  on a DLVision-10G board */

#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000

/*
 * Include common defines/options for all AMCC eval boards
 */
#define CONFIG_HOSTNAME		dlvsion-10g
#define CONFIG_IDENT_STRING	" dlvision-10g 0.06"
#include "amcc-common.h"

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R
#define CONFIG_LAST_STAGE_INIT

#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll   */

/*
 * Configure PLL
 */
#define PLLMR0_DEFAULT PLLMR0_266_133_66
#define PLLMR1_DEFAULT PLLMR1_266_133_66

/* new uImage format support */
#define CONFIG_FIT_DISABLE_SHA256

#define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */

/*
 * Default environment variables
 */
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	CONFIG_AMCC_DEF_ENV						\
	CONFIG_AMCC_DEF_ENV_POWERPC					\
	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
	"kernel_addr=fc000000\0"					\
	"fdt_addr=fc1e0000\0"						\
	"ramdisk_addr=fc200000\0"					\
	""

#define CONFIG_PHY_ADDR		4	/* PHY address			*/
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR	0xc	/* EMAC1 PHY address		*/
#define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ

/*
 * Commands additional to the ones defined in amcc-common.h
 */
#define CONFIG_CMD_DTT
#undef CONFIG_CMD_DIAG
#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_IRQ

/*
 * SDRAM configuration (please see cpu/ppc/sdram.[ch])
 */
#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */

/* SDRAM timings used in datasheet */
#define CONFIG_SYS_SDRAM_CL             3	/* CAS latency */
#define CONFIG_SYS_SDRAM_tRP           20	/* PRECHARGE command period */
#define CONFIG_SYS_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE period */
#define CONFIG_SYS_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
#define CONFIG_SYS_SDRAM_tRFC          66	/* Auto refresh period */

/*
 * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
 * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
 * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
 * The Linux BASE_BAUD define should match this configuration.
 *    baseBaud = cpuClock/(uartDivisor*16)
 * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
 * set Linux BASE_BAUD to 403200.
 */
#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
#undef  CONFIG_SYS_EXT_SERIAL_CLOCK	/* external serial clock */
#undef  CONFIG_SYS_405_UART_ERRATA_59	/* 405GP/CR Rev. D silicon */
#define CONFIG_SYS_BASE_BAUD		691200

/*
 * I2C stuff
 */
#define CONFIG_SYS_I2C_PPC4XX
#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F

#define CONFIG_SYS_I2C_IHS
#define CONFIG_SYS_I2C_IHS_DUAL
#define CONFIG_SYS_I2C_IHS_CH0
#define CONFIG_SYS_I2C_IHS_SPEED_0		50000
#define CONFIG_SYS_I2C_IHS_SLAVE_0		0x7F
#define CONFIG_SYS_I2C_IHS_SPEED_0_1		50000
#define CONFIG_SYS_I2C_IHS_SLAVE_0_1		0x7F
#define CONFIG_SYS_I2C_IHS_CH1
#define CONFIG_SYS_I2C_IHS_SPEED_1		50000
#define CONFIG_SYS_I2C_IHS_SLAVE_1		0x7F
#define CONFIG_SYS_I2C_IHS_SPEED_1_1		50000
#define CONFIG_SYS_I2C_IHS_SLAVE_1_1		0x7F

#define CONFIG_SYS_SPD_BUS_NUM		4

/* Temp sensor/hwmon/dtt */
#define CONFIG_SYS_DTT_BUS_NUM	4
#define CONFIG_DTT_LM63		1	/* National LM63	*/
#define CONFIG_DTT_SENSORS	{ 0x4c, 0x4e, 0x18 } /* Sensor addresses */
#define CONFIG_DTT_PWM_LOOKUPTABLE	\
		{ { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
#define CONFIG_DTT_TACH_LIMIT	0xa10

#define CONFIG_SYS_ICS8N3QV01_I2C	{1, 3}
#define CONFIG_SYS_SIL1178_I2C		{0, 2}
#define CONFIG_SYS_DP501_I2C		{0, 2}

/* EBC peripherals */

#define CONFIG_SYS_FLASH_BASE		0xFC000000
#define CONFIG_SYS_FPGA0_BASE		0x7f100000
#define CONFIG_SYS_FPGA1_BASE		0x7f200000
#define CONFIG_SYS_LATCH_BASE		0x7f300000

#define CONFIG_SYS_FPGA_BASE(k) \
	(k ? CONFIG_SYS_FPGA1_BASE : CONFIG_SYS_FPGA0_BASE)

#define CONFIG_SYS_FPGA_DONE(k) \
	(k ? 0x2000 : 0x1000)

#define CONFIG_SYS_FPGA_COUNT		2

#define CONFIG_SYS_FPGA_PTR { \
	(struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
	(struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }

#define CONFIG_SYS_FPGA_COMMON

#define CONFIG_SYS_LATCH0_RESET		0xffff
#define CONFIG_SYS_LATCH0_BOOT		0xffff
#define CONFIG_SYS_LATCH1_RESET		0xffbf
#define CONFIG_SYS_LATCH1_BOOT		0xffff

#define CONFIG_SYS_FPGA_NO_RFL_HI

/*
 * FLASH organization
 */
#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/

#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sectors per chip*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase/ms */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write/ms */

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buff'd writes */

#define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* no warn upon unknown flash */

#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector */
#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector */

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
#endif

/*
 * PPC405 GPIO Configuration
 */
#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO	Alternate1	*/ \
{ \
/* GPIO Core 0 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO0	PerBLast */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1	TS1E */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2	TS2E */ \
{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3	TS1O */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4	TS2O */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO5	TS3 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6	TS4 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO7	TS5 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8	TS6 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9	TrcClk */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10	PerCS1 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11	PerCS2 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12	PerCS3 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO13	PerCS4 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14	PerAddr03 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15	PerAddr04 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16	PerAddr05 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17	IRQ0 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18	IRQ1 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19	IRQ2 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20	IRQ3 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21	IRQ4 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22	IRQ5 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23	IRQ6 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24	UART0_DCD */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25	UART0_DSR */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26	UART0_RI */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27	UART0_DTR */ \
{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28	UART1_Rx */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29	UART1_Tx */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30	RejectPkt0 */ \
{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31	RejectPkt1 */ \
} \
}

/*
 * Definitions for initial stack pointer and data area (in data cache)
 */
/* use on chip memory (OCM) for temperary stack until sdram is tested */
#define CONFIG_SYS_TEMP_STACK_OCM	1

/* On Chip Memory location */
#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE

#define CONFIG_SYS_GBL_DATA_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * External Bus Controller (EBC) Setup
 */

/* Memory Bank 0 (NOR-flash) */
#define CONFIG_SYS_EBC_PB0AP	(EBC_BXAP_BME_ENABLED		|	\
				 EBC_BXAP_FWT_ENCODE(8)		|	\
				 EBC_BXAP_BWT_ENCODE(7)		|	\
				 EBC_BXAP_BCE_DISABLE		|	\
				 EBC_BXAP_BCT_2TRANS		|	\
				 EBC_BXAP_CSN_ENCODE(0)		|	\
				 EBC_BXAP_OEN_ENCODE(2)		|	\
				 EBC_BXAP_WBN_ENCODE(2)		|	\
				 EBC_BXAP_WBF_ENCODE(2)		|	\
				 EBC_BXAP_TH_ENCODE(4)		|	\
				 EBC_BXAP_RE_DISABLED		|	\
				 EBC_BXAP_SOR_NONDELAYED	|	\
				 EBC_BXAP_BEM_WRITEONLY		|	\
				 EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB0CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
				 EBC_BXCR_BS_64MB		|	\
				 EBC_BXCR_BU_RW			|	\
				 EBC_BXCR_BW_16BIT)

/* Memory Bank 1 (FPGA0) */
#define CONFIG_SYS_EBC_PB1AP	(EBC_BXAP_BME_DISABLED		|	\
				 EBC_BXAP_TWT_ENCODE(5)		|	\
				 EBC_BXAP_BCE_DISABLE		|	\
				 EBC_BXAP_BCT_2TRANS		|	\
				 EBC_BXAP_CSN_ENCODE(0)		|	\
				 EBC_BXAP_OEN_ENCODE(2)		|	\
				 EBC_BXAP_WBN_ENCODE(1)		|	\
				 EBC_BXAP_WBF_ENCODE(1)		|	\
				 EBC_BXAP_TH_ENCODE(0)		|	\
				 EBC_BXAP_RE_DISABLED		|	\
				 EBC_BXAP_SOR_NONDELAYED	|	\
				 EBC_BXAP_BEM_WRITEONLY		|	\
				 EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB1CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA0_BASE) | \
				 EBC_BXCR_BS_1MB		|	\
				 EBC_BXCR_BU_RW			|	\
				 EBC_BXCR_BW_16BIT)

/* Memory Bank 2 (FPGA1) */
#define CONFIG_SYS_EBC_PB2AP	(EBC_BXAP_BME_DISABLED		|	\
				 EBC_BXAP_TWT_ENCODE(6)		|	\
				 EBC_BXAP_BCE_DISABLE		|	\
				 EBC_BXAP_BCT_2TRANS		|	\
				 EBC_BXAP_CSN_ENCODE(0)		|	\
				 EBC_BXAP_OEN_ENCODE(2)		|	\
				 EBC_BXAP_WBN_ENCODE(1)		|	\
				 EBC_BXAP_WBF_ENCODE(1)		|	\
				 EBC_BXAP_TH_ENCODE(0)		|	\
				 EBC_BXAP_RE_DISABLED		|	\
				 EBC_BXAP_SOR_NONDELAYED	|	\
				 EBC_BXAP_BEM_WRITEONLY		|	\
				 EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB2CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
				 EBC_BXCR_BS_1MB		|	\
				 EBC_BXCR_BU_RW			|	\
				 EBC_BXCR_BW_16BIT)

/* Memory Bank 3 (Latches) */
#define CONFIG_SYS_EBC_PB3AP	(EBC_BXAP_BME_ENABLED		|	\
				 EBC_BXAP_FWT_ENCODE(8)		|	\
				 EBC_BXAP_BWT_ENCODE(4)		|	\
				 EBC_BXAP_BCE_DISABLE		|	\
				 EBC_BXAP_BCT_2TRANS		|	\
				 EBC_BXAP_CSN_ENCODE(0)		|	\
				 EBC_BXAP_OEN_ENCODE(1)		|	\
				 EBC_BXAP_WBN_ENCODE(1)		|	\
				 EBC_BXAP_WBF_ENCODE(1)		|	\
				 EBC_BXAP_TH_ENCODE(2)		|	\
				 EBC_BXAP_RE_DISABLED		|	\
				 EBC_BXAP_SOR_NONDELAYED	|	\
				 EBC_BXAP_BEM_WRITEONLY		|	\
				 EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB3CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_LATCH_BASE) | \
				 EBC_BXCR_BS_1MB		|	\
				 EBC_BXCR_BU_RW			|	\
				 EBC_BXCR_BW_16BIT)

/*
 * OSD Setup
 */
#define CONFIG_SYS_MPC92469AC
#define CONFIG_SYS_OSD_SCREENS		CONFIG_SYS_FPGA_COUNT
#define CONFIG_SYS_DP501_DIFFERENTIAL
#define CONFIG_SYS_DP501_VCAPCTRL0	0x01 /* DDR mode 0, DE for H/VSYNC */

#endif	/* __CONFIG_H */
Commit	Line	Data
2da0fc0d DE	1	/*
	2	* (C) Copyright 2010
	3	* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
	4	*
3765b3e7	5	* SPDX-License-Identifier: GPL-2.0+
2da0fc0d DE	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	#define CONFIG_405EP 1 /* this is a PPC405 CPU */
2da0fc0d DE	12	#define CONFIG_DLVISION_10G 1 /* on a DLVision-10G board */
	13
	14	#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
	15
	16	/*
	17	* Include common defines/options for all AMCC eval boards
	18	*/
	19	#define CONFIG_HOSTNAME dlvsion-10g
cccd4f40	20	#define CONFIG_IDENT_STRING " dlvision-10g 0.06"
2da0fc0d DE	21	#include "amcc-common.h"
2da0fc0d DE	22
6e9e6c36 DE	23	#define CONFIG_BOARD_EARLY_INIT_F
6e9e6c36 DE	24	#define CONFIG_BOARD_EARLY_INIT_R
b19bf834	25	#define CONFIG_MISC_INIT_R
2da0fc0d DE	26	#define CONFIG_LAST_STAGE_INIT
	27
	28	#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
	29
	30	/*
	31	* Configure PLL
	32	*/
	33	#define PLLMR0_DEFAULT PLLMR0_266_133_66
	34	#define PLLMR1_DEFAULT PLLMR1_266_133_66
	35
	36	/* new uImage format support */
9a4f479b	37	#define CONFIG_FIT_DISABLE_SHA256
2da0fc0d DE	38
	39	#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
	40
	41	/*
	42	* Default environment variables
	43	*/
	44	#define CONFIG_EXTRA_ENV_SETTINGS \
	45	CONFIG_AMCC_DEF_ENV \
	46	CONFIG_AMCC_DEF_ENV_POWERPC \
	47	CONFIG_AMCC_DEF_ENV_NOR_UPD \
	48	"kernel_addr=fc000000\0" \
	49	"fdt_addr=fc1e0000\0" \
	50	"ramdisk_addr=fc200000\0" \
	51	""
	52
	53	#define CONFIG_PHY_ADDR 4 /* PHY address */
	54	#define CONFIG_HAS_ETH0
	55	#define CONFIG_HAS_ETH1
	56	#define CONFIG_PHY1_ADDR 0xc /* EMAC1 PHY address */
	57	#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
	58
	59	/*
	60	* Commands additional to the ones defined in amcc-common.h
	61	*/
b19bf834	62	#define CONFIG_CMD_DTT
4fb9b41b	63	#undef CONFIG_CMD_DIAG
2da0fc0d	64	#undef CONFIG_CMD_EEPROM
4fb9b41b	65	#undef CONFIG_CMD_IRQ
2da0fc0d DE	66
	67	/*
	68	* SDRAM configuration (please see cpu/ppc/sdram.[ch])
	69	*/
	70	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
	71
	72	/* SDRAM timings used in datasheet */
	73	#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */
	74	#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */
	75	#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */
	76	#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
	77	#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */
	78
	79	/*
	80	* If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
	81	* If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
	82	* Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
	83	* The Linux BASE_BAUD define should match this configuration.
	84	* baseBaud = cpuClock/(uartDivisor*16)
	85	* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
	86	* set Linux BASE_BAUD to 403200.
	87	*/
	88	#define CONFIG_CONS_INDEX 1 /* Use UART0 */
	89	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
	90	#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
	91	#define CONFIG_SYS_BASE_BAUD 691200
	92
	93	/*
	94	* I2C stuff
	95	*/
e313536f DE	96	#define CONFIG_SYS_I2C_PPC4XX
e313536f DE	97	#define CONFIG_SYS_I2C_PPC4XX_CH0
880540de	98	#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
e313536f	99	#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
2da0fc0d	100
b46226bd	101	#define CONFIG_SYS_I2C_IHS
e1d1127a	102	#define CONFIG_SYS_I2C_IHS_DUAL
b46226bd DE	103	#define CONFIG_SYS_I2C_IHS_CH0
	104	#define CONFIG_SYS_I2C_IHS_SPEED_0 50000
	105	#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F
e1d1127a DE	106	#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000
e1d1127a DE	107	#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F
b46226bd DE	108	#define CONFIG_SYS_I2C_IHS_CH1
	109	#define CONFIG_SYS_I2C_IHS_SPEED_1 50000
	110	#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
e1d1127a DE	111	#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000
e1d1127a DE	112	#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F
b46226bd	113
e1d1127a	114	#define CONFIG_SYS_SPD_BUS_NUM 4
b46226bd	115
2da0fc0d	116	/* Temp sensor/hwmon/dtt */
e1d1127a	117	#define CONFIG_SYS_DTT_BUS_NUM 4
2da0fc0d	118	#define CONFIG_DTT_LM63 1 /* National LM63 */
2ade7bee	119	#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */
2da0fc0d	120	#define CONFIG_DTT_PWM_LOOKUPTABLE \
97ca7b3b DE	121	{ { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
97ca7b3b DE	122	{ 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
2da0fc0d DE	123	#define CONFIG_DTT_TACH_LIMIT 0xa10
2da0fc0d DE	124
e1d1127a DE	125	#define CONFIG_SYS_ICS8N3QV01_I2C {1, 3}
	126	#define CONFIG_SYS_SIL1178_I2C {0, 2}
	127	#define CONFIG_SYS_DP501_I2C {0, 2}
e313536f	128
2da0fc0d DE	129	/* EBC peripherals */
	130
	131	#define CONFIG_SYS_FLASH_BASE 0xFC000000
	132	#define CONFIG_SYS_FPGA0_BASE 0x7f100000
	133	#define CONFIG_SYS_FPGA1_BASE 0x7f200000
	134	#define CONFIG_SYS_LATCH_BASE 0x7f300000
	135
	136	#define CONFIG_SYS_FPGA_BASE(k) \
	137	(k ? CONFIG_SYS_FPGA1_BASE : CONFIG_SYS_FPGA0_BASE)
	138
	139	#define CONFIG_SYS_FPGA_DONE(k) \
	140	(k ? 0x2000 : 0x1000)
	141
	142	#define CONFIG_SYS_FPGA_COUNT 2
	143
aba27acf DE	144	#define CONFIG_SYS_FPGA_PTR { \
	145	(struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
	146	(struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
	147
	148	#define CONFIG_SYS_FPGA_COMMON
	149
2da0fc0d DE	150	#define CONFIG_SYS_LATCH0_RESET 0xffff
2da0fc0d DE	151	#define CONFIG_SYS_LATCH0_BOOT 0xffff
3e24dd2b	152	#define CONFIG_SYS_LATCH1_RESET 0xffbf
2da0fc0d DE	153	#define CONFIG_SYS_LATCH1_BOOT 0xffff
2da0fc0d DE	154
5cb4100f DE	155	#define CONFIG_SYS_FPGA_NO_RFL_HI
5cb4100f DE	156
2da0fc0d DE	157	/*
	158	* FLASH organization
	159	*/
	160	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
	161	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	162
	163	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	164
	165	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
	166	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
	167
	168	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
	169	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
	170
	171	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */
2da0fc0d DE	172
	173	#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
	174	#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */
	175
	176	#ifdef CONFIG_ENV_IS_IN_FLASH
	177	#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
	178	#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
	179	#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
	180
	181	/* Address and size of Redundant Environment Sector */
	182	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
	183	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	184	#endif
	185
	186	/*
	187	* PPC405 GPIO Configuration
	188	*/
	189	#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
	190	{ \
	191	/* GPIO Core 0 */ \
	192	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
	193	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
	194	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
	195	{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
	196	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
	197	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
	198	{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
	199	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \
	200	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
	201	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
	202	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
	203	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
	204	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
	205	{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
	206	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
	207	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
	208	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
	209	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
	210	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
	211	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
	212	{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
	213	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
	214	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
	215	{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
	216	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
	217	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
	218	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
	219	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
	220	{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
	221	{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
	222	{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
	223	{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
	224	} \
	225	}
	226
	227	/*
	228	* Definitions for initial stack pointer and data area (in data cache)
	229	*/
	230	/* use on chip memory (OCM) for temperary stack until sdram is tested */
	231	#define CONFIG_SYS_TEMP_STACK_OCM 1
	232
	233	/* On Chip Memory location */
	234	#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
	235	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
236	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
b39d1213	237	#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
2da0fc0d	238
2da0fc0d	239	#define CONFIG_SYS_GBL_DATA_OFFSET \
b39d1213	240	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
2da0fc0d DE	241	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	242
	243	/*
	244	* External Bus Controller (EBC) Setup
	245	*/
	246
	247	/* Memory Bank 0 (NOR-flash) */
	248	#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_ENABLED \| \
	249	EBC_BXAP_FWT_ENCODE(8) \| \
	250	EBC_BXAP_BWT_ENCODE(7) \| \
	251	EBC_BXAP_BCE_DISABLE \| \
	252	EBC_BXAP_BCT_2TRANS \| \
	253	EBC_BXAP_CSN_ENCODE(0) \| \
	254	EBC_BXAP_OEN_ENCODE(2) \| \
	255	EBC_BXAP_WBN_ENCODE(2) \| \
	256	EBC_BXAP_WBF_ENCODE(2) \| \
	257	EBC_BXAP_TH_ENCODE(4) \| \
	258	EBC_BXAP_RE_DISABLED \| \
	259	EBC_BXAP_SOR_NONDELAYED \| \
	260	EBC_BXAP_BEM_WRITEONLY \| \
	261	EBC_BXAP_PEN_DISABLED)
	262	#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) \| \
	263	EBC_BXCR_BS_64MB \| \
	264	EBC_BXCR_BU_RW \| \
	265	EBC_BXCR_BW_16BIT)
	266
	267	/* Memory Bank 1 (FPGA0) */
	268	#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED \| \
	269	EBC_BXAP_TWT_ENCODE(5) \| \
	270	EBC_BXAP_BCE_DISABLE \| \
	271	EBC_BXAP_BCT_2TRANS \| \
	272	EBC_BXAP_CSN_ENCODE(0) \| \
	273	EBC_BXAP_OEN_ENCODE(2) \| \
	274	EBC_BXAP_WBN_ENCODE(1) \| \
	275	EBC_BXAP_WBF_ENCODE(1) \| \
	276	EBC_BXAP_TH_ENCODE(0) \| \
	277	EBC_BXAP_RE_DISABLED \| \
	278	EBC_BXAP_SOR_NONDELAYED \| \
	279	EBC_BXAP_BEM_WRITEONLY \| \
	280	EBC_BXAP_PEN_DISABLED)
	281	#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA0_BASE) \| \
	282	EBC_BXCR_BS_1MB \| \
	283	EBC_BXCR_BU_RW \| \
	284	EBC_BXCR_BW_16BIT)
	285
	286	/* Memory Bank 2 (FPGA1) */
	287	#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED \| \
	288	EBC_BXAP_TWT_ENCODE(6) \| \
	289	EBC_BXAP_BCE_DISABLE \| \
	290	EBC_BXAP_BCT_2TRANS \| \
	291	EBC_BXAP_CSN_ENCODE(0) \| \
	292	EBC_BXAP_OEN_ENCODE(2) \| \
	293	EBC_BXAP_WBN_ENCODE(1) \| \
	294	EBC_BXAP_WBF_ENCODE(1) \| \
	295	EBC_BXAP_TH_ENCODE(0) \| \
	296	EBC_BXAP_RE_DISABLED \| \
	297	EBC_BXAP_SOR_NONDELAYED \| \
	298	EBC_BXAP_BEM_WRITEONLY \| \
	299	EBC_BXAP_PEN_DISABLED)
	300	#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) \| \
	301	EBC_BXCR_BS_1MB \| \
	302	EBC_BXCR_BU_RW \| \
	303	EBC_BXCR_BW_16BIT)
	304
305	/* Memory Bank 3 (Latches) */
306	#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_ENABLED \| \
307	EBC_BXAP_FWT_ENCODE(8) \| \
308	EBC_BXAP_BWT_ENCODE(4) \| \
309	EBC_BXAP_BCE_DISABLE \| \
310	EBC_BXAP_BCT_2TRANS \| \
311	EBC_BXAP_CSN_ENCODE(0) \| \
312	EBC_BXAP_OEN_ENCODE(1) \| \
313	EBC_BXAP_WBN_ENCODE(1) \| \
314	EBC_BXAP_WBF_ENCODE(1) \| \
315	EBC_BXAP_TH_ENCODE(2) \| \
316	EBC_BXAP_RE_DISABLED \| \
317	EBC_BXAP_SOR_NONDELAYED \| \
318	EBC_BXAP_BEM_WRITEONLY \| \
319	EBC_BXAP_PEN_DISABLED)
320	#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_LATCH_BASE) \| \
321	EBC_BXCR_BS_1MB \| \
322	EBC_BXCR_BU_RW \| \
323	EBC_BXCR_BW_16BIT)
324
325	/*
326	* OSD Setup
327	*/
7749c84e	328	#define CONFIG_SYS_MPC92469AC
2da0fc0d	329	#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
e1d1127a DE	330	#define CONFIG_SYS_DP501_DIFFERENTIAL
e1d1127a DE	331	#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
2da0fc0d DE	332
2da0fc0d DE	333	#endif /* __CONFIG_H */