[people/ms/u-boot.git] / include / configs / dnp1110.h

/*
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Rolf Offermanns <rof@sysgo.de>
 *
 * Configuation settings for the SSV DNP1110 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * If we are developing, we might want to start armboot from ram
 * so we MUST NOT initialize critical regs like mem-timing ...
 */
#define CONFIG_SKIP_LOWLEVEL_INIT	1
#undef  CONFIG_SKIP_RELOCATE_UBOOT

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_SA1110		1	/* This is an SA1110 CPU	*/
#define CONFIG_DNP1110		1	/* on an DNP/1110 Board      */

#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

/*
 * Hardware drivers
 */
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC91111_BASE 0x20000300


/*
 * select serial console configuration
 */
#define CONFIG_SERIAL1          1	/* we use SERIAL 1 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_BAUDRATE		115200


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>


#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTARGS		"root=ramfs devfs=mount console=ttySA0,115200"
#define CONFIG_ETHADDR		02:80:ad:20:31:b8
#define CONFIG_NETMASK          255.255.0.0
#define CONFIG_IPADDR		172.22.2.23
#define CONFIG_SERVERIP		172.22.2.22
#define CONFIG_BOOTFILE		"dnp1110"
#define CONFIG_BOOTCOMMAND	"tftp; bootm"

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
#endif

/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT		"DNP1110 # "	/* Monitor Command Prompt	*/
#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/

#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */

#define	CONFIG_SYS_LOAD_ADDR		0xc0200000	/* default load address	*/

#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
#define CONFIG_SYS_CPUSPEED		0x0b		/* set core clock to 220 MHz */

						/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */


#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE		0x01000000 /* 16 MB */
#define PHYS_FLASH_BANK_SIZE    0x01000000 /* 32 MB Banks */
#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 256 KB sectors (x2) */

#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	128		/* max number of sectors on one chip	*/

/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */

#define	CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xF80000)	/* Addr of Environment Sector	*/
#define CONFIG_ENV_SIZE			0x20000						/* Total Size of Environment Sector	*/

#endif	/* __CONFIG_H */
Commit	Line	Data
da27dcf0 WD	1	/*
	2	* (C) Copyright 2002
	3	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	4	* Rolf Offermanns <rof@sysgo.de>
	5	*
	6	* Configuation settings for the SSV DNP1110 board.
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
	27	#ifndef __CONFIG_H
	28	#define __CONFIG_H
	29
	30	/*
	31	* If we are developing, we might want to start armboot from ram
	32	* so we MUST NOT initialize critical regs like mem-timing ...
	33	*/
8aa1a2d1 WD	34	#define CONFIG_SKIP_LOWLEVEL_INIT 1
8aa1a2d1 WD	35	#undef CONFIG_SKIP_RELOCATE_UBOOT
da27dcf0 WD	36
	37	/*
	38	* High Level Configuration Options
	39	* (easy to change)
	40	*/
	41	#define CONFIG_SA1110 1 /* This is an SA1110 CPU */
	42	#define CONFIG_DNP1110 1 /* on an DNP/1110 Board */
	43
	44	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	45
	46	/*
	47	* Size of malloc() pool
	48	*/
6d0f6bcf JCPV	49	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
6d0f6bcf JCPV	50	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
da27dcf0 WD	51
	52	/*
	53	* Hardware drivers
	54	*/
	55	#define CONFIG_DRIVER_SMC91111
	56	#define CONFIG_SMC91111_BASE 0x20000300
	57
	58
	59	/*
	60	* select serial console configuration
	61	*/
	62	#define CONFIG_SERIAL1 1 /* we use SERIAL 1 */
	63
	64	/* allow to overwrite serial and ethaddr */
	65	#define CONFIG_ENV_OVERWRITE
	66
	67	#define CONFIG_BAUDRATE 115200
	68
da27dcf0	69
80ff4f99 JL	70	/*
	71	* BOOTP options
	72	*/
	73	#define CONFIG_BOOTP_BOOTFILESIZE
	74	#define CONFIG_BOOTP_BOOTPATH
	75	#define CONFIG_BOOTP_GATEWAY
	76	#define CONFIG_BOOTP_HOSTNAME
	77
	78
ab999ba1 JL	79	/*
	80	* Command line configuration.
	81	*/
	82	#include <config_cmd_default.h>
	83
da27dcf0 WD	84
da27dcf0 WD	85	#define CONFIG_BOOTDELAY 3
53677ef1	86	#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
da27dcf0 WD	87	#define CONFIG_ETHADDR 02:80:ad:20:31:b8
	88	#define CONFIG_NETMASK 255.255.0.0
	89	#define CONFIG_IPADDR 172.22.2.23
	90	#define CONFIG_SERVERIP 172.22.2.22
dc7c9a1a	91	#define CONFIG_BOOTFILE "dnp1110"
da27dcf0 WD	92	#define CONFIG_BOOTCOMMAND "tftp; bootm"
da27dcf0 WD	93
ab999ba1	94	#if defined(CONFIG_CMD_KGDB)
da27dcf0 WD	95	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	96	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	97	#endif
	98
	99	/*
	100	* Miscellaneous configurable options
	101	*/
6d0f6bcf JCPV	102	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	103	#define CONFIG_SYS_PROMPT "DNP1110 # " /* Monitor Command Prompt */
	104	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	105	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	106	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	107	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
da27dcf0	108
6d0f6bcf JCPV	109	#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
6d0f6bcf JCPV	110	#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
da27dcf0	111
6d0f6bcf	112	#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
da27dcf0	113
6d0f6bcf	114	#define CONFIG_SYS_LOAD_ADDR 0xc0200000 /* default load address */
da27dcf0	115
6d0f6bcf JCPV	116	#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
6d0f6bcf JCPV	117	#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */
da27dcf0 WD	118
da27dcf0 WD	119	/* valid baudrates */
6d0f6bcf	120	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
da27dcf0 WD	121
	122	/*-----------------------------------------------------------------------
	123	* Stack sizes
	124	*
	125	* The stack sizes are set up in start.S using the settings below
	126	*/
	127	#define CONFIG_STACKSIZE (1281024) / regular stack */
	128	#ifdef CONFIG_USE_IRQ
	129	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	130	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	131	#endif
	132
	133	/*-----------------------------------------------------------------------
	134	* Physical Memory Map
	135	*/
	136	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
	137	#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
	138	#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
	139
	140
	141	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	142	#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
dc7c9a1a WD	143	#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 32 MB Banks */
dc7c9a1a WD	144	#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
da27dcf0	145
6d0f6bcf	146	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
da27dcf0 WD	147
	148	/*-----------------------------------------------------------------------
	149	* FLASH and environment organization
	150	*/
6d0f6bcf JCPV	151	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	152	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
da27dcf0 WD	153
da27dcf0 WD	154	/* timeout values are in ticks */
6d0f6bcf JCPV	155	#define CONFIG_SYS_FLASH_ERASE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Erase */
6d0f6bcf JCPV	156	#define CONFIG_SYS_FLASH_WRITE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Write */
da27dcf0	157
5a1aceb0	158	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	159	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xF80000) /* Addr of Environment Sector */
0e8d1586 JCPV	160	#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
da27dcf0 WD	161
da27dcf0 WD	162	#endif /* __CONFIG_H */