[people/ms/u-boot.git] / include / configs / dns325.h

/*
 * Copyright (C) 2011
 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
 *
 * Based on Kirkwood support:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H

/*
 * Machine number definition
 */
#define MACH_TYPE_DNS325		3800
#define CONFIG_MACH_TYPE		MACH_TYPE_DNS325
#define CONFIG_IDENT_STRING		"\nD-Link DNS-325"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_SYS_GENERIC_BOARD

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DATE
#define CONFIG_SYS_MVFS

#define CONFIG_NR_DRAM_BANKS		1

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Remove or override few declarations from mv-common.h */
#undef CONFIG_SYS_PROMPT

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
#endif

/*
 * RTC driver configuration
 */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif

/*
 * Enable GPI0 support
 */
#define CONFIG_KIRKWOOD_GPIO

/*
 * Use the HUSH parser
 */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Console configuration
 */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/*
 * Enable device tree support
 */
#define CONFIG_OF_LIBFDT

/*
 * Display cpu info at boot
 */
#define CONFIG_DISPLAY_CPUINFO

/*
 * Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
#define CONFIG_ENV_ADDR			0xe0000
#define CONFIG_ENV_OFFSET		0xe0000	/* env starts here */

/*
 * Default environment variables
 */
#define MTDIDS_DEFAULT			"nand0=orion_nand"

#define MTDPARTS_DEFAULT		"mtdparts=orion_nand:" \
	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"stdin=serial\0" \
	"stdout=serial\0" \
	"stderr=serial\0" \
	"loadaddr=0x800000\0" \
	"autoload=no\0" \
	"console=ttyS0,115200\0" \
	"mtdparts="MTDPARTS_DEFAULT \
	"optargs=\0" \
	"bootenv=uEnv.txt\0" \
	"importbootenv=echo Importing environment ...; " \
		"env import -t ${loadaddr} ${filesize}\0" \
	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	"setbootargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${mtdparts} " \
		"root=${bootenvroot} " \
		"rootfstype=${bootenvrootfstype}\0" \
	"subbootcmd=run setbootargs; " \
		"if run bootenvloadimage; then " \
			"bootm ${loadaddr};" \
		"fi;\0" \
	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	"nandrootfstype=ubifs\0" \
	"nandloadimage=nand read ${loadaddr} kernel\0" \
	"setnandbootenv=echo Booting from nand ...; " \
		"setenv bootenvroot ${nandroot}; " \
		"setenv bootenvrootfstype ${nandrootfstype}; " \
		"setenv bootenvloadimage ${nandloadimage}\0"

#define CONFIG_BOOTCOMMAND \
	"if test -n ${bootenv} && usb start; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment ${bootenv} from usb;" \
			"run importbootenv;" \
		"fi;" \
		"if test -n ${bootenvcmd}; then " \
			"echo Running bootenvcmd ...;" \
			"run bootenvcmd;" \
		"fi;" \
	"fi;" \
	"run setnandbootenv subbootcmd;"

#endif /* _CONFIG_DNS325_H */
Commit	Line	Data
bfacf466 S	1	/*
bfacf466 S	2	* Copyright (C) 2011
16437a19	3	* Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
bfacf466 S	4	*
	5	* Based on Kirkwood support:
	6	* (C) Copyright 2009
	7	* Marvell Semiconductor <www.marvell.com>
	8	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
bfacf466 S	11	*/
	12
	13	#ifndef _CONFIG_DNS325_H
	14	#define _CONFIG_DNS325_H
	15
	16	/*
	17	* Machine number definition
	18	*/
	19	#define MACH_TYPE_DNS325 3800
	20	#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
	21	#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
	22
	23	/*
	24	* High Level Configuration Options (easy to change)
	25	*/
	26	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
bfacf466 S	27	#define CONFIG_KW88F6281 /* SOC Name */
bfacf466 S	28	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
f5d8d6eb	29	#define CONFIG_SYS_GENERIC_BOARD
bfacf466 S	30
	31	/*
	32	* Commands configuration
	33	*/
	34	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	35	#include <config_cmd_default.h>
	36	#define CONFIG_CMD_DHCP
	37	#define CONFIG_CMD_ENV
	38	#define CONFIG_CMD_NAND
	39	#define CONFIG_CMD_PING
	40	#define CONFIG_CMD_USB
	41	#define CONFIG_CMD_IDE
	42	#define CONFIG_CMD_DATE
	43	#define CONFIG_SYS_MVFS
	44
	45	#define CONFIG_NR_DRAM_BANKS 1
	46
	47	/*
	48	* mv-common.h should be defined after CMD configs since it used them
	49	* to enable certain macros
	50	*/
	51	#include "mv-common.h"
	52
	53	/* Remove or override few declarations from mv-common.h */
	54	#undef CONFIG_SYS_PROMPT
bfacf466 S	55
	56	/*
	57	* Ethernet Driver configuration
	58	*/
	59	#ifdef CONFIG_CMD_NET
	60	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	61	#define CONFIG_NETCONSOLE
	62	#endif
	63
	64	/*
	65	* SATA Driver configuration
	66	*/
	67	#ifdef CONFIG_MVSATA_IDE
	68	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	69	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	70	#endif
	71
	72	/*
	73	* RTC driver configuration
	74	*/
	75	#ifdef CONFIG_CMD_DATE
	76	#define CONFIG_RTC_MV
	77	#endif
	78
	79	/*
	80	* Enable GPI0 support
	81	*/
	82	#define CONFIG_KIRKWOOD_GPIO
	83
	84	/*
	85	* Use the HUSH parser
	86	*/
	87	#define CONFIG_SYS_HUSH_PARSER
bfacf466 S	88
	89	/*
	90	* Console configuration
	91	*/
	92	#define CONFIG_CONSOLE_MUX
	93	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	94
	95	/*
	96	* Enable device tree support
	97	*/
	98	#define CONFIG_OF_LIBFDT
	99
	100	/*
	101	* Display cpu info at boot
	102	*/
	103	#define CONFIG_DISPLAY_CPUINFO
	104
	105	/*
	106	* Environment variables configurations
	107	*/
	108	#ifdef CONFIG_CMD_NAND
	109	#define CONFIG_ENV_IS_IN_NAND
	110	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
	111	#else
	112	#define CONFIG_ENV_IS_NOWHERE
	113	#endif
	114
	115	#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
	116	#define CONFIG_ENV_ADDR 0xe0000
	117	#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
	118
	119	/*
	120	* Default environment variables
	121	*/
	122	#define MTDIDS_DEFAULT "nand0=orion_nand"
	123
	124	#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
	125	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
	126
	127	#define CONFIG_EXTRA_ENV_SETTINGS \
	128	"stdin=serial\0" \
	129	"stdout=serial\0" \
	130	"stderr=serial\0" \
	131	"loadaddr=0x800000\0" \
	132	"autoload=no\0" \
	133	"console=ttyS0,115200\0" \
	134	"mtdparts="MTDPARTS_DEFAULT \
	135	"optargs=\0" \
	136	"bootenv=uEnv.txt\0" \
	137	"importbootenv=echo Importing environment ...; " \
	138	"env import -t ${loadaddr} ${filesize}\0" \
	139	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	140	"setbootargs=setenv bootargs console=${console} " \
	141	"${optargs} " \
	142	"${mtdparts} " \
	143	"root=${bootenvroot} " \
	144	"rootfstype=${bootenvrootfstype}\0" \
	145	"subbootcmd=run setbootargs; " \
	146	"if run bootenvloadimage; then " \
	147	"bootm ${loadaddr};" \
	148	"fi;\0" \
	149	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	150	"nandrootfstype=ubifs\0" \
	151	"nandloadimage=nand read ${loadaddr} kernel\0" \
152	"setnandbootenv=echo Booting from nand ...; " \
153	"setenv bootenvroot ${nandroot}; " \
154	"setenv bootenvrootfstype ${nandrootfstype}; " \
155	"setenv bootenvloadimage ${nandloadimage}\0"
156
157	#define CONFIG_BOOTCOMMAND \
158	"if test -n ${bootenv} && usb start; then " \
159	"if run loadbootenv; then " \
160	"echo Loaded environment ${bootenv} from usb;" \
161	"run importbootenv;" \
162	"fi;" \
163	"if test -n ${bootenvcmd}; then " \
164	"echo Running bootenvcmd ...;" \
165	"run bootenvcmd;" \
166	"fi;" \
167	"fi;" \
168	"run setnandbootenv subbootcmd;"
169
170	#endif /* _CONFIG_DNS325_H */