]>
Commit | Line | Data |
---|---|---|
bfacf466 S |
1 | /* |
2 | * Copyright (C) 2011 | |
16437a19 | 3 | * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> |
bfacf466 S |
4 | * |
5 | * Based on Kirkwood support: | |
6 | * (C) Copyright 2009 | |
7 | * Marvell Semiconductor <www.marvell.com> | |
8 | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | |
9 | * | |
1a459660 | 10 | * SPDX-License-Identifier: GPL-2.0+ |
bfacf466 S |
11 | */ |
12 | ||
13 | #ifndef _CONFIG_DNS325_H | |
14 | #define _CONFIG_DNS325_H | |
15 | ||
16 | /* | |
17 | * Machine number definition | |
18 | */ | |
19 | #define MACH_TYPE_DNS325 3800 | |
20 | #define CONFIG_MACH_TYPE MACH_TYPE_DNS325 | |
21 | #define CONFIG_IDENT_STRING "\nD-Link DNS-325" | |
22 | ||
23 | /* | |
24 | * High Level Configuration Options (easy to change) | |
25 | */ | |
26 | #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ | |
bfacf466 S |
27 | #define CONFIG_KW88F6281 /* SOC Name */ |
28 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ | |
29 | ||
30 | /* | |
31 | * Commands configuration | |
32 | */ | |
33 | #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ | |
bfacf466 S |
34 | #define CONFIG_CMD_DHCP |
35 | #define CONFIG_CMD_ENV | |
36 | #define CONFIG_CMD_NAND | |
37 | #define CONFIG_CMD_PING | |
38 | #define CONFIG_CMD_USB | |
39 | #define CONFIG_CMD_IDE | |
40 | #define CONFIG_CMD_DATE | |
41 | #define CONFIG_SYS_MVFS | |
42 | ||
43 | #define CONFIG_NR_DRAM_BANKS 1 | |
44 | ||
45 | /* | |
46 | * mv-common.h should be defined after CMD configs since it used them | |
47 | * to enable certain macros | |
48 | */ | |
49 | #include "mv-common.h" | |
50 | ||
51 | /* Remove or override few declarations from mv-common.h */ | |
52 | #undef CONFIG_SYS_PROMPT | |
bfacf466 S |
53 | |
54 | /* | |
55 | * Ethernet Driver configuration | |
56 | */ | |
57 | #ifdef CONFIG_CMD_NET | |
58 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ | |
59 | #define CONFIG_NETCONSOLE | |
60 | #endif | |
61 | ||
62 | /* | |
63 | * SATA Driver configuration | |
64 | */ | |
65 | #ifdef CONFIG_MVSATA_IDE | |
66 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
67 | #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET | |
68 | #endif | |
69 | ||
70 | /* | |
71 | * RTC driver configuration | |
72 | */ | |
73 | #ifdef CONFIG_CMD_DATE | |
74 | #define CONFIG_RTC_MV | |
75 | #endif | |
76 | ||
77 | /* | |
78 | * Enable GPI0 support | |
79 | */ | |
80 | #define CONFIG_KIRKWOOD_GPIO | |
81 | ||
82 | /* | |
83 | * Use the HUSH parser | |
84 | */ | |
85 | #define CONFIG_SYS_HUSH_PARSER | |
bfacf466 S |
86 | |
87 | /* | |
88 | * Console configuration | |
89 | */ | |
90 | #define CONFIG_CONSOLE_MUX | |
91 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
92 | ||
93 | /* | |
94 | * Enable device tree support | |
95 | */ | |
96 | #define CONFIG_OF_LIBFDT | |
97 | ||
98 | /* | |
99 | * Display cpu info at boot | |
100 | */ | |
101 | #define CONFIG_DISPLAY_CPUINFO | |
102 | ||
103 | /* | |
104 | * Environment variables configurations | |
105 | */ | |
106 | #ifdef CONFIG_CMD_NAND | |
107 | #define CONFIG_ENV_IS_IN_NAND | |
108 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ | |
109 | #else | |
110 | #define CONFIG_ENV_IS_NOWHERE | |
111 | #endif | |
112 | ||
113 | #define CONFIG_ENV_SIZE 0x20000 /* 128KB */ | |
114 | #define CONFIG_ENV_ADDR 0xe0000 | |
115 | #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ | |
116 | ||
117 | /* | |
118 | * Default environment variables | |
119 | */ | |
120 | #define MTDIDS_DEFAULT "nand0=orion_nand" | |
121 | ||
122 | #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \ | |
123 | "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0" | |
124 | ||
125 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
126 | "stdin=serial\0" \ | |
127 | "stdout=serial\0" \ | |
128 | "stderr=serial\0" \ | |
129 | "loadaddr=0x800000\0" \ | |
130 | "autoload=no\0" \ | |
131 | "console=ttyS0,115200\0" \ | |
132 | "mtdparts="MTDPARTS_DEFAULT \ | |
133 | "optargs=\0" \ | |
134 | "bootenv=uEnv.txt\0" \ | |
135 | "importbootenv=echo Importing environment ...; " \ | |
136 | "env import -t ${loadaddr} ${filesize}\0" \ | |
137 | "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ | |
138 | "setbootargs=setenv bootargs console=${console} " \ | |
139 | "${optargs} " \ | |
140 | "${mtdparts} " \ | |
141 | "root=${bootenvroot} " \ | |
142 | "rootfstype=${bootenvrootfstype}\0" \ | |
143 | "subbootcmd=run setbootargs; " \ | |
144 | "if run bootenvloadimage; then " \ | |
145 | "bootm ${loadaddr};" \ | |
146 | "fi;\0" \ | |
147 | "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ | |
148 | "nandrootfstype=ubifs\0" \ | |
149 | "nandloadimage=nand read ${loadaddr} kernel\0" \ | |
150 | "setnandbootenv=echo Booting from nand ...; " \ | |
151 | "setenv bootenvroot ${nandroot}; " \ | |
152 | "setenv bootenvrootfstype ${nandrootfstype}; " \ | |
153 | "setenv bootenvloadimage ${nandloadimage}\0" | |
154 | ||
155 | #define CONFIG_BOOTCOMMAND \ | |
156 | "if test -n ${bootenv} && usb start; then " \ | |
157 | "if run loadbootenv; then " \ | |
158 | "echo Loaded environment ${bootenv} from usb;" \ | |
159 | "run importbootenv;" \ | |
160 | "fi;" \ | |
161 | "if test -n ${bootenvcmd}; then " \ | |
162 | "echo Running bootenvcmd ...;" \ | |
163 | "run bootenvcmd;" \ | |
164 | "fi;" \ | |
165 | "fi;" \ | |
166 | "run setnandbootenv subbootcmd;" | |
167 | ||
168 | #endif /* _CONFIG_DNS325_H */ |