[thirdparty/u-boot.git] / include / configs / dns325.h

/*
 * Copyright (C) 2011
 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
 *
 * Based on Kirkwood support:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H

/*
 * Machine number definition
 */
#define MACH_TYPE_DNS325		3800
#define CONFIG_MACH_TYPE		MACH_TYPE_DNS325

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DATE
#define CONFIG_SYS_MVFS

#define CONFIG_NR_DRAM_BANKS		1

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Remove or override few declarations from mv-common.h */

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
#endif

/*
 * RTC driver configuration
 */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif

/*
 * Enable GPI0 support
 */
#define CONFIG_KIRKWOOD_GPIO

/*
 * Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
#define CONFIG_ENV_ADDR			0xe0000
#define CONFIG_ENV_OFFSET		0xe0000	/* env starts here */

/*
 * Default environment variables
 */
#define MTDIDS_DEFAULT			"nand0=orion_nand"

#define MTDPARTS_DEFAULT		"mtdparts=orion_nand:" \
	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"stdin=serial\0" \
	"stdout=serial\0" \
	"stderr=serial\0" \
	"loadaddr=0x800000\0" \
	"autoload=no\0" \
	"console=ttyS0,115200\0" \
	"mtdparts="MTDPARTS_DEFAULT \
	"optargs=\0" \
	"bootenv=uEnv.txt\0" \
	"importbootenv=echo Importing environment ...; " \
		"env import -t ${loadaddr} ${filesize}\0" \
	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	"setbootargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${mtdparts} " \
		"root=${bootenvroot} " \
		"rootfstype=${bootenvrootfstype}\0" \
	"subbootcmd=run setbootargs; " \
		"if run bootenvloadimage; then " \
			"bootm ${loadaddr};" \
		"fi;\0" \
	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	"nandrootfstype=ubifs\0" \
	"nandloadimage=nand read ${loadaddr} kernel\0" \
	"setnandbootenv=echo Booting from nand ...; " \
		"setenv bootenvroot ${nandroot}; " \
		"setenv bootenvrootfstype ${nandrootfstype}; " \
		"setenv bootenvloadimage ${nandloadimage}\0"

#define CONFIG_BOOTCOMMAND \
	"if test -n ${bootenv} && usb start; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment ${bootenv} from usb;" \
			"run importbootenv;" \
		"fi;" \
		"if test -n ${bootenvcmd}; then " \
			"echo Running bootenvcmd ...;" \
			"run bootenvcmd;" \
		"fi;" \
	"fi;" \
	"run setnandbootenv subbootcmd;"

#endif /* _CONFIG_DNS325_H */
Commit	Line	Data
bfacf466 S	1	/*
bfacf466 S	2	* Copyright (C) 2011
16437a19	3	* Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
bfacf466 S	4	*
	5	* Based on Kirkwood support:
	6	* (C) Copyright 2009
	7	* Marvell Semiconductor <www.marvell.com>
	8	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
bfacf466 S	11	*/
	12
	13	#ifndef _CONFIG_DNS325_H
	14	#define _CONFIG_DNS325_H
	15
	16	/*
	17	* Machine number definition
	18	*/
	19	#define MACH_TYPE_DNS325 3800
	20	#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
bfacf466 S	21
	22	/*
	23	* High Level Configuration Options (easy to change)
	24	*/
	25	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
bfacf466 S	26	#define CONFIG_KW88F6281 /* SOC Name */
	27	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	28
	29	/*
	30	* Commands configuration
	31	*/
	32	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
bfacf466 S	33	#define CONFIG_CMD_ENV
bfacf466 S	34	#define CONFIG_CMD_NAND
bfacf466 S	35	#define CONFIG_CMD_IDE
	36	#define CONFIG_CMD_DATE
	37	#define CONFIG_SYS_MVFS
	38
	39	#define CONFIG_NR_DRAM_BANKS 1
	40
	41	/*
	42	* mv-common.h should be defined after CMD configs since it used them
	43	* to enable certain macros
	44	*/
	45	#include "mv-common.h"
	46
	47	/* Remove or override few declarations from mv-common.h */
bfacf466 S	48
	49	/*
	50	* Ethernet Driver configuration
	51	*/
	52	#ifdef CONFIG_CMD_NET
	53	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	54	#define CONFIG_NETCONSOLE
	55	#endif
	56
	57	/*
	58	* SATA Driver configuration
	59	*/
	60	#ifdef CONFIG_MVSATA_IDE
	61	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	62	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	63	#endif
	64
	65	/*
	66	* RTC driver configuration
	67	*/
	68	#ifdef CONFIG_CMD_DATE
	69	#define CONFIG_RTC_MV
	70	#endif
	71
	72	/*
	73	* Enable GPI0 support
	74	*/
	75	#define CONFIG_KIRKWOOD_GPIO
	76
bfacf466 S	77	/*
	78	* Environment variables configurations
	79	*/
	80	#ifdef CONFIG_CMD_NAND
	81	#define CONFIG_ENV_IS_IN_NAND
	82	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
	83	#else
	84	#define CONFIG_ENV_IS_NOWHERE
	85	#endif
	86
	87	#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
	88	#define CONFIG_ENV_ADDR 0xe0000
	89	#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
	90
	91	/*
	92	* Default environment variables
	93	*/
	94	#define MTDIDS_DEFAULT "nand0=orion_nand"
	95
	96	#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
	97	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
	98
	99	#define CONFIG_EXTRA_ENV_SETTINGS \
	100	"stdin=serial\0" \
	101	"stdout=serial\0" \
	102	"stderr=serial\0" \
	103	"loadaddr=0x800000\0" \
	104	"autoload=no\0" \
	105	"console=ttyS0,115200\0" \
	106	"mtdparts="MTDPARTS_DEFAULT \
	107	"optargs=\0" \
	108	"bootenv=uEnv.txt\0" \
	109	"importbootenv=echo Importing environment ...; " \
	110	"env import -t ${loadaddr} ${filesize}\0" \
	111	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	112	"setbootargs=setenv bootargs console=${console} " \
	113	"${optargs} " \
	114	"${mtdparts} " \
	115	"root=${bootenvroot} " \
	116	"rootfstype=${bootenvrootfstype}\0" \
	117	"subbootcmd=run setbootargs; " \
	118	"if run bootenvloadimage; then " \
	119	"bootm ${loadaddr};" \
	120	"fi;\0" \
	121	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	122	"nandrootfstype=ubifs\0" \
	123	"nandloadimage=nand read ${loadaddr} kernel\0" \
	124	"setnandbootenv=echo Booting from nand ...; " \
	125	"setenv bootenvroot ${nandroot}; " \
	126	"setenv bootenvrootfstype ${nandrootfstype}; " \
	127	"setenv bootenvloadimage ${nandloadimage}\0"
	128
	129	#define CONFIG_BOOTCOMMAND \
	130	"if test -n ${bootenv} && usb start; then " \
	131	"if run loadbootenv; then " \
	132	"echo Loaded environment ${bootenv} from usb;" \
	133	"run importbootenv;" \
	134	"fi;" \
	135	"if test -n ${bootenvcmd}; then " \
	136	"echo Running bootenvcmd ...;" \
	137	"run bootenvcmd;" \
	138	"fi;" \
	139	"fi;" \
	140	"run setnandbootenv subbootcmd;"
141
142	#endif /* _CONFIG_DNS325_H */