[people/ms/u-boot.git] / include / configs / draco.h

/*
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_DRACO_H
#define __CONFIG_DRACO_H

#define CONFIG_SIEMENS_DRACO
#define MACH_TYPE_DRACO			4314
#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_DRACO

#include "siemens-am33x-common.h"

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_MPUCLK	300
#define DDR_PLL_FREQ	303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC

#define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
#define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */

#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=27\0" \
	"led0=103,1,0\0" \
	"led1=64,0,1\0"

#undef CONFIG_DOS_PARTITION

#define CONFIG_BOARD_LATE_INIT

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
#define EEPROM_ADDR_DDR3 0x90
#define EEPROM_ADDR_CHIP 0x120

#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300

#undef CONFIG_MII
#undef CONFIG_PHY_GIGE
#define CONFIG_PHY_SMSC

#define CONFIG_FACTORYSET

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

/* Define own nand partitions */
#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
#define CONFIG_ENV_SIZE_REDUND      0x2000
#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)

#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2

#ifndef CONFIG_SPL_BUILD

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=draco\0" \
	"ubi_off=2048\0"\
	"nand_img_size=0x400000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	CONFIG_ENV_SETTINGS_V2 \
	CONFIG_ENV_SETTINGS_NAND_V2

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */

#define CONFIG_BOOTCOMMAND \
"if dfubutton; then " \
	"run dfu_start; " \
	"reset; " \
"fi;" \
"run nand_boot;" \
"run nand_boot_backup;" \
"reset;"

#else

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */
#endif	/* ! __CONFIG_DRACO_H */
Commit	Line	Data
f04776b6 ES	1	/*
	2	* (C) Copyright 2013 Siemens Schweiz AG
	3	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* U-Boot file:/include/configs/am335x_evm.h
	7	*
	8	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	9	*
	10	* SPDX-License-Identifier: GPL-2.0+
	11	*/
	12
	13	#ifndef __CONFIG_DRACO_H
	14	#define __CONFIG_DRACO_H
	15
	16	#define CONFIG_SIEMENS_DRACO
	17	#define MACH_TYPE_DRACO 4314
	18	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO
	19
	20	#include "siemens-am33x-common.h"
	21
61159b76 HS	22	#define CONFIG_DISPLAY_CPUINFO
61159b76 HS	23	#define CONFIG_SYS_MPUCLK 300
f04776b6 ES	24	#define DDR_PLL_FREQ 303
	25	#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
	26
61159b76	27	#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */
f04776b6 ES	28	#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
f04776b6 ES	29
61159b76 HS	30	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	31	"button_dfu0=27\0" \
	32	"led0=103,1,0\0" \
	33	"led1=64,0,1\0"
	34
f04776b6	35	#undef CONFIG_DOS_PARTITION
f04776b6	36
61159b76	37	#define CONFIG_BOARD_LATE_INIT
f04776b6 ES	38
	39	/* Physical Memory Map */
	40	#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
	41
	42	/* I2C Configuration */
	43	#define CONFIG_SYS_I2C_SPEED 100000
	44
	45	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	46	#define EEPROM_ADDR_DDR3 0x90
	47	#define EEPROM_ADDR_CHIP 0x120
	48
	49	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
	50
f04776b6 ES	51	#undef CONFIG_MII
	52	#undef CONFIG_PHY_GIGE
	53	#define CONFIG_PHY_SMSC
	54
	55	#define CONFIG_FACTORYSET
	56
	57	/* Watchdog */
	58	#define CONFIG_OMAP_WATCHDOG
	59
61159b76 HS	60	/* Define own nand partitions */
	61	#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
	62	#define CONFIG_ENV_SIZE_REDUND 0x2000
	63	#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
	64
61159b76 HS	65	#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
61159b76 HS	66
f04776b6 ES	67	#ifndef CONFIG_SPL_BUILD
	68
	69	/* Default env settings */
	70	#define CONFIG_EXTRA_ENV_SETTINGS \
61159b76	71	"hostname=draco\0" \
6b3943f1	72	"ubi_off=2048\0"\
f04776b6 ES	73	"nand_img_size=0x400000\0" \
f04776b6 ES	74	"optargs=\0" \
61159b76 HS	75	"preboot=draco_led 0\0" \
	76	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	77	CONFIG_ENV_SETTINGS_V2 \
	78	CONFIG_ENV_SETTINGS_NAND_V2
f04776b6 ES	79
	80	#ifndef CONFIG_RESTORE_FLASH
	81	/* set to negative value for no autoboot */
f04776b6 ES	82
	83	#define CONFIG_BOOTCOMMAND \
	84	"if dfubutton; then " \
	85	"run dfu_start; " \
	86	"reset; " \
	87	"fi;" \
	88	"run nand_boot;" \
61159b76	89	"run nand_boot_backup;" \
f04776b6 ES	90	"reset;"
f04776b6 ES	91
f04776b6	92	#else
f04776b6 ES	93
	94	#define CONFIG_BOOTCOMMAND \
	95	"setenv autoload no; " \
	96	"dhcp; " \
	97	"if tftp 80000000 debrick.scr; then " \
	98	"source 80000000; " \
	99	"fi"
	100	#endif
	101	#endif /* CONFIG_SPL_BUILD */
	102	#endif /* ! __CONFIG_DRACO_H */