]>
Commit | Line | Data |
---|---|---|
a0a868b2 WS |
1 | /* |
2 | * (C) Copyright 2011 | |
3 | * Jason Cooper <u-boot@lakedaemon.net> | |
4 | * | |
5 | * Based on work by: | |
6 | * Marvell Semiconductor <www.marvell.com> | |
7 | * Written-by: Siddarth Gore <gores@marvell.com> | |
8 | * | |
9 | * SPDX-License-Identifier: GPL-2.0+ | |
10 | */ | |
11 | ||
12 | #ifndef _CONFIG_DS109_H | |
13 | #define _CONFIG_DS109_H | |
14 | ||
cd7b6344 TR |
15 | /* Provide the MACH_TYPE value that the vendor kernel requires. */ |
16 | #define CONFIG_MACH_TYPE 527 | |
a0a868b2 WS |
17 | |
18 | /* | |
19 | * High Level Configuration Options (easy to change) | |
20 | */ | |
21 | #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ | |
a0a868b2 WS |
22 | |
23 | /* | |
24 | * Commands configuration | |
25 | */ | |
26 | #define CONFIG_CMD_EXT2 | |
a0a868b2 WS |
27 | |
28 | /* | |
29 | * mv-plug-common.h should be defined after CMD configs since it used them | |
30 | * to enable certain macros | |
31 | */ | |
32 | #include "mv-plug-common.h" | |
33 | ||
34 | /* | |
35 | * Environment variables configurations | |
36 | */ | |
37 | #ifdef CONFIG_SPI_FLASH | |
38 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 | |
39 | #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ | |
40 | #else | |
41 | #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ | |
42 | #endif | |
43 | ||
44 | #ifdef CONFIG_CMD_SF | |
45 | #define CONFIG_HARD_SPI 1 | |
46 | #define CONFIG_KIRKWOOD_SPI 1 | |
47 | #define CONFIG_ENV_SPI_BUS 0 | |
48 | #define CONFIG_ENV_SPI_CS 0 | |
49 | #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ | |
50 | #endif | |
51 | ||
52 | /* | |
53 | * max 4k env size is enough, but in case of nand | |
54 | * it has to be rounded to sector size | |
55 | */ | |
56 | #define CONFIG_ENV_SIZE 0x10000 | |
57 | #define CONFIG_ENV_ADDR 0x3d0000 | |
58 | #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ | |
59 | ||
60 | /* | |
61 | * Default environment variables | |
62 | */ | |
63 | #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ | |
64 | "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ | |
65 | "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ | |
66 | "bootm 0x6400000;" | |
67 | ||
68 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
69 | "x_bootcmd_ethernet=ping 192.168.1.2\0" \ | |
70 | "x_bootcmd_usb=usb start\0" \ | |
71 | "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ | |
72 | "x_bootargs=console=ttyS0,115200\0" \ | |
73 | "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ | |
74 | "ipaddr=192.168.1.5\0" | |
75 | ||
76 | /* | |
77 | * Ethernet Driver configuration | |
78 | */ | |
79 | #ifdef CONFIG_CMD_NET | |
80 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ | |
81 | #define CONFIG_PHY_BASE_ADR 8 | |
82 | #endif /* CONFIG_CMD_NET */ | |
83 | ||
84 | /* | |
85 | * SATA Driver configuration | |
86 | */ | |
87 | #ifdef CONFIG_MVSATA_IDE | |
88 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
89 | #endif /*CONFIG_MVSATA_IDE*/ | |
90 | ||
91 | #endif /* _CONFIG_DS109_H */ |