projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| a0a868b2 WS |
1 | /* |
| 2 | * (C) Copyright 2011 | |
| 3 | * Jason Cooper <u-boot@lakedaemon.net> | |
| 4 | * | |
| 5 | * Based on work by: | |
| 6 | * Marvell Semiconductor <www.marvell.com> | |
| 7 | * Written-by: Siddarth Gore <gores@marvell.com> | |
| 8 | * | |
| 9 | * SPDX-License-Identifier: GPL-2.0+ | |
| 10 | */ | |
| 11 | ||
| 12 | #ifndef _CONFIG_DS109_H | |
| 13 | #define _CONFIG_DS109_H | |
| 14 | ||
| cd7b6344 TR |
15 | /* Provide the MACH_TYPE value that the vendor kernel requires. */ |
| 16 | #define CONFIG_MACH_TYPE 527 | |
| a0a868b2 WS |
17 | |
| 18 | /* | |
| 19 | * High Level Configuration Options (easy to change) | |
| 20 | */ | |
| 21 | #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ | |
| a0a868b2 WS |
22 | |
| 23 | /* | |
| 24 | * Commands configuration | |
| 25 | */ | |
| 26 | #define CONFIG_CMD_EXT2 | |
| 27 | #define CONFIG_CMD_FAT | |
| 28 | ||
| 29 | /* | |
| 30 | * mv-plug-common.h should be defined after CMD configs since it used them | |
| 31 | * to enable certain macros | |
| 32 | */ | |
| 33 | #include "mv-plug-common.h" | |
| 34 | ||
| 35 | /* | |
| 36 | * Environment variables configurations | |
| 37 | */ | |
| 38 | #ifdef CONFIG_SPI_FLASH | |
| 39 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 | |
| 40 | #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ | |
| 41 | #else | |
| 42 | #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ | |
| 43 | #endif | |
| 44 | ||
| 45 | #ifdef CONFIG_CMD_SF | |
| 46 | #define CONFIG_HARD_SPI 1 | |
| 47 | #define CONFIG_KIRKWOOD_SPI 1 | |
| 48 | #define CONFIG_ENV_SPI_BUS 0 | |
| 49 | #define CONFIG_ENV_SPI_CS 0 | |
| 50 | #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ | |
| 51 | #endif | |
| 52 | ||
| 53 | /* | |
| 54 | * max 4k env size is enough, but in case of nand | |
| 55 | * it has to be rounded to sector size | |
| 56 | */ | |
| 57 | #define CONFIG_ENV_SIZE 0x10000 | |
| 58 | #define CONFIG_ENV_ADDR 0x3d0000 | |
| 59 | #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ | |
| 60 | ||
| 61 | /* | |
| 62 | * Default environment variables | |
| 63 | */ | |
| 64 | #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ | |
| 65 | "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ | |
| 66 | "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ | |
| 67 | "bootm 0x6400000;" | |
| 68 | ||
| 69 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 70 | "x_bootcmd_ethernet=ping 192.168.1.2\0" \ | |
| 71 | "x_bootcmd_usb=usb start\0" \ | |
| 72 | "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ | |
| 73 | "x_bootargs=console=ttyS0,115200\0" \ | |
| 74 | "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ | |
| 75 | "ipaddr=192.168.1.5\0" | |
| 76 | ||
| 77 | /* | |
| 78 | * Ethernet Driver configuration | |
| 79 | */ | |
| 80 | #ifdef CONFIG_CMD_NET | |
| 81 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ | |
| 82 | #define CONFIG_PHY_BASE_ADR 8 | |
| 83 | #endif /* CONFIG_CMD_NET */ | |
| 84 | ||
| 85 | /* | |
| 86 | * SATA Driver configuration | |
| 87 | */ | |
| 88 | #ifdef CONFIG_MVSATA_IDE | |
| 89 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
| 90 | #endif /*CONFIG_MVSATA_IDE*/ | |
| 91 | ||
| 92 | #endif /* _CONFIG_DS109_H */ |