[people/ms/u-boot.git] / include / configs / goflexhome.h

/*
 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
 *
 * Based on dockstar.h originally written by
 * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
 *
 * Based on sheevaplug.h originally written by
 * Prafulla Wadaskar <prafulla@marvell.com>
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_GOFLEXHOME_H
#define _CONFIG_GOFLEXHOME_H


/*
 * Version number information
 */
#define CONFIG_IDENT_STRING	"\nSeagate GoFlex Home"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
#define CONFIG_KW88F6281	1	/* SOC Name */
#define CONFIG_MACH_GOFLEXHOME		/* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Default GPIO configuration and LED status
 */
#define GOFLEXHOME_OE_LOW               (~(0))
#define GOFLEXHOME_OE_HIGH              (~(0))
#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */

/* PHY related */
#define MV88E1116_LED_FCTRL_REG         10
#define MV88E1116_CPRSP_CR3_REG         21
#define MV88E1116_MAC_CTRL_REG          21
#define MV88E1116_PGADR_REG             22
#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_EXT4
#define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
#endif
/*
 * max 4k env size is enough, but in case of nand
 * it has to be rounded to sector size
 */
#define CONFIG_ENV_SIZE			0x20000	/* 128k */
#define CONFIG_ENV_ADDR			0xC0000
#define CONFIG_ENV_OFFSET		0xC0000	/* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND \
	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
	"ubi part root; " \
	"ubifsmount ubi:root; " \
	"ubifsload 0x800000 ${kernel}; " \
	"bootm 0x800000"

#define CONFIG_MTDPARTS \
	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=console=ttyS0,115200\0" \
	"mtdids=nand0=orion_nand\0" \
	"mtdparts="CONFIG_MTDPARTS \
	"kernel=/boot/uImage\0" \
	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 *  * SATA Driver configuration
 *   */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/

/*
 *  * RTC driver configuration
 *   */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */

#endif /* _CONFIG_GOFLEXHOME_H */
Commit	Line	Data
0ad6c34c SR	1	/*
	2	* Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
	3	*
	4	* Based on dockstar.h originally written by
	5	* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
	6	*
	7	* Based on sheevaplug.h originally written by
	8	* Prafulla Wadaskar <prafulla@marvell.com>
	9	* (C) Copyright 2009
	10	* Marvell Semiconductor <www.marvell.com>
	11	*
1a459660	12	* SPDX-License-Identifier: GPL-2.0+
0ad6c34c SR	13	*/
	14
	15	#ifndef _CONFIG_GOFLEXHOME_H
	16	#define _CONFIG_GOFLEXHOME_H
	17
15155b49	18
0ad6c34c SR	19	/*
	20	* Version number information
	21	*/
	22	#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
	23
	24	/*
	25	* High Level Configuration Options (easy to change)
	26	*/
	27	#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
0ad6c34c SR	28	#define CONFIG_KW88F6281 1 /* SOC Name */
	29	#define CONFIG_MACH_GOFLEXHOME /* Machine type */
	30	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	31
	32	/*
	33	* Default GPIO configuration and LED status
	34	*/
	35	#define GOFLEXHOME_OE_LOW (~(0))
	36	#define GOFLEXHOME_OE_HIGH (~(0))
	37	#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
	38	#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
	39
	40	/* PHY related */
	41	#define MV88E1116_LED_FCTRL_REG 10
	42	#define MV88E1116_CPRSP_CR3_REG 21
	43	#define MV88E1116_MAC_CTRL_REG 21
	44	#define MV88E1116_PGADR_REG 22
	45	#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
	46	#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
	47
	48	/*
	49	* Commands configuration
	50	*/
	51	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	52	#define CONFIG_CONSOLE_MUX
	53	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	54
0ad6c34c SR	55	#define CONFIG_CMD_DHCP
	56	#define CONFIG_CMD_ENV
	57	#define CONFIG_CMD_MII
	58	#define CONFIG_CMD_NAND
	59	#define CONFIG_CMD_PING
	60	#define CONFIG_CMD_USB
	61	#define CONFIG_CMD_IDE
	62	#define CONFIG_CMD_DATE
	63	#define CONFIG_CMD_EXT4
	64	#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
	65
	66	/*
	67	* mv-common.h should be defined after CMD configs since it used them
	68	* to enable certain macros
	69	*/
	70	#include "mv-common.h"
	71
0ad6c34c SR	72	/*
	73	* Environment variables configurations
	74	*/
	75	#ifdef CONFIG_CMD_NAND
	76	#define CONFIG_ENV_IS_IN_NAND 1
	77	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
	78	#else
	79	#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
	80	#endif
	81	/*
	82	* max 4k env size is enough, but in case of nand
	83	* it has to be rounded to sector size
	84	*/
	85	#define CONFIG_ENV_SIZE 0x20000 /* 128k */
	86	#define CONFIG_ENV_ADDR 0xC0000
	87	#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
	88
	89	/*
	90	* Default environment variables
	91	*/
	92	#define CONFIG_BOOTCOMMAND \
	93	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
	94	"ubi part root; " \
	95	"ubifsmount ubi:root; " \
	96	"ubifsload 0x800000 ${kernel}; " \
	97	"bootm 0x800000"
	98
	99	#define CONFIG_MTDPARTS \
	100	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
	101
	102	#define CONFIG_EXTRA_ENV_SETTINGS \
	103	"console=console=ttyS0,115200\0" \
	104	"mtdids=nand0=orion_nand\0" \
	105	"mtdparts="CONFIG_MTDPARTS \
	106	"kernel=/boot/uImage\0" \
	107	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
	108
	109	/*
	110	* Ethernet Driver configuration
	111	*/
	112	#ifdef CONFIG_CMD_NET
	113	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	114	#define CONFIG_PHY_BASE_ADR 0
	115	#endif /* CONFIG_CMD_NET */
	116
	117	/*
	118	* * SATA Driver configuration
	119	* */
	120	#ifdef CONFIG_MVSATA_IDE
	121	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	122	#endif /CONFIG_MVSATA_IDE/
	123
	124	/*
	125	* * RTC driver configuration
	126	* */
	127	#ifdef CONFIG_CMD_DATE
	128	#define CONFIG_RTC_MV
	129	#endif /* CONFIG_CMD_DATE */
	130
	131	#endif /* _CONFIG_GOFLEXHOME_H */