]>
Commit | Line | Data |
---|---|---|
0ad6c34c SR |
1 | /* |
2 | * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> | |
3 | * | |
4 | * Based on dockstar.h originally written by | |
5 | * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> | |
6 | * | |
7 | * Based on sheevaplug.h originally written by | |
8 | * Prafulla Wadaskar <prafulla@marvell.com> | |
9 | * (C) Copyright 2009 | |
10 | * Marvell Semiconductor <www.marvell.com> | |
11 | * | |
1a459660 | 12 | * SPDX-License-Identifier: GPL-2.0+ |
0ad6c34c SR |
13 | */ |
14 | ||
15 | #ifndef _CONFIG_GOFLEXHOME_H | |
16 | #define _CONFIG_GOFLEXHOME_H | |
17 | ||
15155b49 LP |
18 | #define CONFIG_SYS_GENERIC_BOARD |
19 | ||
0ad6c34c SR |
20 | /* |
21 | * Version number information | |
22 | */ | |
23 | #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" | |
24 | ||
25 | /* | |
26 | * High Level Configuration Options (easy to change) | |
27 | */ | |
28 | #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ | |
0ad6c34c SR |
29 | #define CONFIG_KW88F6281 1 /* SOC Name */ |
30 | #define CONFIG_MACH_GOFLEXHOME /* Machine type */ | |
31 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ | |
32 | ||
33 | /* | |
34 | * Default GPIO configuration and LED status | |
35 | */ | |
36 | #define GOFLEXHOME_OE_LOW (~(0)) | |
37 | #define GOFLEXHOME_OE_HIGH (~(0)) | |
38 | #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ | |
39 | #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ | |
40 | ||
41 | /* PHY related */ | |
42 | #define MV88E1116_LED_FCTRL_REG 10 | |
43 | #define MV88E1116_CPRSP_CR3_REG 21 | |
44 | #define MV88E1116_MAC_CTRL_REG 21 | |
45 | #define MV88E1116_PGADR_REG 22 | |
46 | #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) | |
47 | #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) | |
48 | ||
49 | /* | |
50 | * Commands configuration | |
51 | */ | |
52 | #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ | |
53 | #define CONFIG_CONSOLE_MUX | |
54 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
55 | ||
56 | #include <config_cmd_default.h> | |
57 | #define CONFIG_CMD_DHCP | |
58 | #define CONFIG_CMD_ENV | |
59 | #define CONFIG_CMD_MII | |
60 | #define CONFIG_CMD_NAND | |
61 | #define CONFIG_CMD_PING | |
62 | #define CONFIG_CMD_USB | |
63 | #define CONFIG_CMD_IDE | |
64 | #define CONFIG_CMD_DATE | |
65 | #define CONFIG_CMD_EXT4 | |
66 | #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ | |
67 | ||
68 | /* | |
69 | * mv-common.h should be defined after CMD configs since it used them | |
70 | * to enable certain macros | |
71 | */ | |
72 | #include "mv-common.h" | |
73 | ||
74 | #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ | |
75 | #define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ | |
76 | ||
77 | /* | |
78 | * Environment variables configurations | |
79 | */ | |
80 | #ifdef CONFIG_CMD_NAND | |
81 | #define CONFIG_ENV_IS_IN_NAND 1 | |
82 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ | |
83 | #else | |
84 | #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ | |
85 | #endif | |
86 | /* | |
87 | * max 4k env size is enough, but in case of nand | |
88 | * it has to be rounded to sector size | |
89 | */ | |
90 | #define CONFIG_ENV_SIZE 0x20000 /* 128k */ | |
91 | #define CONFIG_ENV_ADDR 0xC0000 | |
92 | #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ | |
93 | ||
94 | /* | |
95 | * Default environment variables | |
96 | */ | |
97 | #define CONFIG_BOOTCOMMAND \ | |
98 | "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ | |
99 | "ubi part root; " \ | |
100 | "ubifsmount ubi:root; " \ | |
101 | "ubifsload 0x800000 ${kernel}; " \ | |
102 | "bootm 0x800000" | |
103 | ||
104 | #define CONFIG_MTDPARTS \ | |
105 | "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" | |
106 | ||
107 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
108 | "console=console=ttyS0,115200\0" \ | |
109 | "mtdids=nand0=orion_nand\0" \ | |
110 | "mtdparts="CONFIG_MTDPARTS \ | |
111 | "kernel=/boot/uImage\0" \ | |
112 | "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" | |
113 | ||
114 | /* | |
115 | * Ethernet Driver configuration | |
116 | */ | |
117 | #ifdef CONFIG_CMD_NET | |
118 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ | |
119 | #define CONFIG_PHY_BASE_ADR 0 | |
120 | #endif /* CONFIG_CMD_NET */ | |
121 | ||
122 | /* | |
123 | * * SATA Driver configuration | |
124 | * */ | |
125 | #ifdef CONFIG_MVSATA_IDE | |
126 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
127 | #endif /*CONFIG_MVSATA_IDE*/ | |
128 | ||
129 | /* | |
130 | * * RTC driver configuration | |
131 | * */ | |
132 | #ifdef CONFIG_CMD_DATE | |
133 | #define CONFIG_RTC_MV | |
134 | #endif /* CONFIG_CMD_DATE */ | |
135 | ||
136 | #endif /* _CONFIG_GOFLEXHOME_H */ |