]> git.ipfire.org Git - thirdparty/u-boot.git/blame - include/configs/gplugd.h
configs: Re-sync almost all of cmd/Kconfig
[thirdparty/u-boot.git] / include / configs / gplugd.h
CommitLineData
26749582
AB
1/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
1a459660 12 * SPDX-License-Identifier: GPL-2.0+
26749582
AB
13 */
14
15#ifndef __CONFIG_GPLUGD_H
16#define __CONFIG_GPLUGD_H
17
e0c8fa8f
AB
18/*
19 * FIXME: fix for error caused due to recent update to mach-types.h
20 */
21#include <asm/mach-types.h>
22#ifdef MACH_TYPE_SHEEVAD
23#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
24#else
25#define MACH_TYPE_SHEEVAD 2625
26#endif
27
26749582
AB
28/*
29 * Version number information
30 */
31#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
32
33/*
34 * High Level Configuration Options
35 */
36#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
37#define CONFIG_ARMADA100 1 /* SOC Family Name */
38#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
e0c8fa8f 39#define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */
26749582
AB
40#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
41
42#define CONFIG_SYS_TEXT_BASE 0x00f00000
43
44/*
45 * There is no internal RAM in ARMADA100, using DRAM
46 * TBD: dcache to be used for this
47 */
48#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
49#define CONFIG_NR_DRAM_BANKS_MAX 2
50
51/*
52 * Commands configuration
53 */
54#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
dbb87bbd
AB
55#define CONFIG_CMD_EXT2
56#define CONFIG_CMD_FAT
aa0ecfeb
AB
57
58/* Disable DCACHE */
59#define CONFIG_SYS_DCACHE_OFF
60
61/* Network configuration */
62#ifdef CONFIG_CMD_NET
aa0ecfeb
AB
63#define CONFIG_ARMADA100_FEC
64
65/* DHCP Support */
aa0ecfeb
AB
66#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
67#endif /* CONFIG_CMD_NET */
26749582 68
47e75d72
AB
69/* GPIO Support */
70#define CONFIG_MARVELL_GPIO
71
72/* PHY configuration */
73#define CONFIG_MII
74#define CONFIG_CMD_MII
75#define CONFIG_RESET_PHY_R
76/* 88E3015 register definition */
77#define PHY_LED_PAR_SEL_REG 22
78#define PHY_LED_MAN_REG 25
79#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
80/* GPIO Configuration for PHY */
81#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
82
daa4b2f7
AB
83/* SPI Support */
84#define CONFIG_ARMADA100_SPI
85#define CONFIG_ENV_SPI_CS 110
86#define CONFIG_SYS_SSP_PORT 2
87
2f83cd57 88/* Flash Support */
2f83cd57 89
26749582
AB
90/*
91 * mv-common.h should be defined after CMD configs since it used them
92 * to enable certain macros
93 */
94#include "mv-common.h"
95#undef CONFIG_ARCH_MISC_INIT
96
97#ifdef CONFIG_SYS_NS16550_COM1
98#undef CONFIG_SYS_NS16550_COM1
99#endif /* CONFIG_SYS_NS16550_COM1 */
100
101#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
102
103/*
104 * Environment variables configurations
105 */
b5de038f
AB
106#define CONFIG_ENV_IS_IN_SPI_FLASH
107#define CONFIG_ENV_SECT_SIZE 0x4000
108#define CONFIG_ENV_SIZE 0x4000
109#define CONFIG_ENV_OFFSET 0x07C000
110
111#define CONFIG_CMD_ASKENV
26749582 112
099cb1ee
AB
113#ifdef CONFIG_CMD_USB
114#define CONFIG_USB_EHCI
115#define CONFIG_USB_EHCI_ARMADA100
116#define CONFIG_EHCI_IS_TDI
117#define CONFIG_USB_STORAGE
118#endif /* CONFIG_CMD_USB */
119
120#define CONFIG_DOS_PARTITION
121#define CONFIG_ISO_PARTITION
122#define CONFIG_SUPPORT_VFAT
123
26749582 124#endif /* __CONFIG_GPLUGD_H */