[people/ms/u-boot.git] / include / configs / hikey.h

/*
 * (C) Copyright 2015 Linaro
 *
 * Peter Griffin <peter.griffin@linaro.org>
 *
 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
 * configurations.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __HIKEY_H
#define __HIKEY_H

#include <linux/sizes.h>

#define CONFIG_POWER
#define CONFIG_POWER_HI6553

#define CONFIG_REMAKE_ELF

#define CONFIG_SUPPORT_RAW_INITRD

/* Cache Definitions */
#define CONFIG_SYS_DCACHE_OFF

#define CONFIG_IDENT_STRING		"hikey"

/* Flat Device Tree Definitions */
#define CONFIG_OF_LIBFDT

#define CONFIG_BOARD_EARLY_INIT_F

/* Physical Memory Map */

/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
#define CONFIG_SYS_TEXT_BASE		0x35000000

#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM_1			0x00000000

/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
#define PHYS_SDRAM_1_SIZE		0x3EFFFFFF

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

#define CONFIG_SYS_INIT_RAM_SIZE	0x1000

#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)

#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		19000000

/* Generic Interrupt Controller Definitions */
#define GICD_BASE			0xf6801000
#define GICC_BASE			0xf6802000

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)

/* Serial port PL010/PL011 through the device model */
#define CONFIG_PL01X_SERIAL
#define CONFIG_BAUDRATE			115200

#define CONFIG_CMD_USB
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO

#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MISC_INIT_R
#endif

#define CONFIG_HIKEY_GPIO

/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_DWMMC
#define CONFIG_HIKEY_DWMMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_MMC

#define CONFIG_FS_EXT4

/* Command line configuration */
#define CONFIG_MENU
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_ENV

#define CONFIG_MTD_PARTITIONS

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE

#include <config_distro_defaults.h>

/* Initial environment variables */

/*
 * Defines where the kernel and FDT will be put in RAM
 */

/* Assume we boot with root on the seventh partition of eMMC */
#define CONFIG_BOOTARGS	"console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"

#define BOOT_TARGET_DEVICES(func) \
	func(USB, usb, 0) \
	func(MMC, mmc, 1) \
	func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=Image\0"	\
				"kernel_addr_r=0x00080000\0" \
				"fdt_name=hi6220-hikey.dtb\0" \
				"fdt_addr_r=0x02000000\0" \
				"fdt_high=0xffffffffffffffff\0" \
				"initrd_high=0xffffffffffffffff\0" \
				BOOTENV


/* Preserve enviroment on sd card */
#define CONFIG_COMMAND_HISTORY

#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE               "mmc"
#define FAT_ENV_DEVICE_AND_PART         "1:1"
#define FAT_ENV_FILE                    "uboot.env"
#define CONFIG_FAT_WRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64	/* max command args */

#define CONFIG_SYS_NO_FLASH

#endif /* __HIKEY_H */
Commit	Line	Data
11ac2363 PG	1	/*
	2	* (C) Copyright 2015 Linaro
	3	*
	4	* Peter Griffin <peter.griffin@linaro.org>
	5	*
	6	* Configuration for HiKey 96boards CE. Parts were derived from other ARM
	7	* configurations.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __HIKEY_H
	13	#define __HIKEY_H
	14
c9a67d24 PG	15	#include <linux/sizes.h>
c9a67d24 PG	16
11ac2363 PG	17	#define CONFIG_POWER
	18	#define CONFIG_POWER_HI6553
	19
	20	#define CONFIG_REMAKE_ELF
	21
	22	#define CONFIG_SUPPORT_RAW_INITRD
	23
	24	/* Cache Definitions */
	25	#define CONFIG_SYS_DCACHE_OFF
	26
	27	#define CONFIG_IDENT_STRING "hikey"
	28
	29	/* Flat Device Tree Definitions */
	30	#define CONFIG_OF_LIBFDT
	31
9c71bcdc PG	32	#define CONFIG_BOARD_EARLY_INIT_F
9c71bcdc PG	33
11ac2363 PG	34	/* Physical Memory Map */
	35
	36	/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
	37	#define CONFIG_SYS_TEXT_BASE 0x35000000
	38
	39	#define CONFIG_NR_DRAM_BANKS 1
	40	#define PHYS_SDRAM_1 0x00000000
	41
	42	/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
05e682d4 PG	43	#define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
05e682d4 PG	44
11ac2363 PG	45	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	46
	47	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
	48
	49	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	50
	51	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
	52
	53	/* Generic Timer Definitions */
	54	#define COUNTER_FREQUENCY 19000000
	55
	56	/* Generic Interrupt Controller Definitions */
	57	#define GICD_BASE 0xf6801000
	58	#define GICC_BASE 0xf6802000
	59
	60	/* Size of malloc() pool */
c9a67d24	61	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
11ac2363	62
9c71bcdc PG	63	/* Serial port PL010/PL011 through the device model */
9c71bcdc PG	64	#define CONFIG_PL01X_SERIAL
11ac2363 PG	65	#define CONFIG_BAUDRATE 115200
	66
	67	#define CONFIG_CMD_USB
	68	#ifdef CONFIG_CMD_USB
	69	#define CONFIG_USB_DWC2
	70	#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
	71	/#define CONFIG_DWC2_DFLT_SPEED_FULL/
	72	#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
	73
	74	#define CONFIG_USB_STORAGE
	75	#define CONFIG_USB_HOST_ETHER
	76	#define CONFIG_USB_ETHER_SMSC95XX
	77	#define CONFIG_USB_ETHER_ASIX
	78	#define CONFIG_MISC_INIT_R
	79	#endif
	80
	81	#define CONFIG_HIKEY_GPIO
11ac2363 PG	82
	83	/* SD/MMC configuration */
	84	#define CONFIG_GENERIC_MMC
	85	#define CONFIG_MMC
	86	#define CONFIG_DWMMC
	87	#define CONFIG_HIKEY_DWMMC
	88	#define CONFIG_BOUNCE_BUFFER
	89	#define CONFIG_CMD_MMC
	90
	91	#define CONFIG_FS_EXT4
	92
	93	/* Command line configuration */
	94	#define CONFIG_MENU
	95	#define CONFIG_CMD_CACHE
	96	#define CONFIG_CMD_UNZIP
	97	#define CONFIG_CMD_ENV
	98
	99	#define CONFIG_MTD_PARTITIONS
	100
	101	/* BOOTP options */
	102	#define CONFIG_BOOTP_BOOTFILESIZE
	103
	104	#include <config_distro_defaults.h>
	105
	106	/* Initial environment variables */
	107
	108	/*
	109	* Defines where the kernel and FDT will be put in RAM
	110	*/
	111
	112	/* Assume we boot with root on the seventh partition of eMMC */
	113	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
	114
	115	#define BOOT_TARGET_DEVICES(func) \
	116	func(USB, usb, 0) \
	117	func(MMC, mmc, 1) \
	118	func(DHCP, dhcp, na)
	119	#include <config_distro_bootcmd.h>
	120
	121	#define CONFIG_EXTRA_ENV_SETTINGS \
	122	"kernel_name=Image\0" \
	123	"kernel_addr_r=0x00080000\0" \
	124	"fdt_name=hi6220-hikey.dtb\0" \
	125	"fdt_addr_r=0x02000000\0" \
	126	"fdt_high=0xffffffffffffffff\0" \
	127	"initrd_high=0xffffffffffffffff\0" \
	128	BOOTENV
	129
	130
	131	/* Preserve enviroment on sd card */
	132	#define CONFIG_COMMAND_HISTORY
	133
	134	#define CONFIG_ENV_SIZE 0x1000
	135	#define CONFIG_ENV_IS_IN_FAT
	136	#define FAT_ENV_INTERFACE "mmc"
	137	#define FAT_ENV_DEVICE_AND_PART "1:1"
	138	#define FAT_ENV_FILE "uboot.env"
	139	#define CONFIG_FAT_WRITE
	140	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	141
	142	/* Monitor Command Prompt */
	143	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	144	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	145	sizeof(CONFIG_SYS_PROMPT) + 16)
146	#define CONFIG_SYS_HUSH_PARSER
147	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
148	#define CONFIG_SYS_LONGHELP
149	#define CONFIG_CMDLINE_EDITING
150	#define CONFIG_SYS_MAXARGS 64 /* max command args */
151
152	#define CONFIG_SYS_NO_FLASH
153
154	#endif /* __HIKEY_H */