[people/ms/u-boot.git] / include / configs / ids8313.h

/*
 * (C) Copyright 2013
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * Copyright (c) 2011 IDS GmbH, Germany
 * Sergej Stepanov <ste@ids.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_MPC831x
#define CONFIG_MPC8313
#define CONFIG_IDS8313

#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_FSL_ELBC

#define CONFIG_MISC_INIT_R

#define CONFIG_BOOT_RETRY_TIME		900
#define CONFIG_BOOT_RETRY_MIN		30
#define CONFIG_BOOTDELAY		1
#define CONFIG_RESET_TO_RETRY

#define CONFIG_83XX_CLKIN		66000000	/* in Hz */
#define CONFIG_SYS_CLK_FREQ		CONFIG_83XX_CLKIN

#define CONFIG_SYS_IMMR		0xF0000000

#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */

/*
 * Hardware Reset Configuration Word
 * if CLKIN is 66.000MHz, then
 * CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
 */
#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ |\
			     HRCWL_DDR_TO_SCB_CLK_2X1 |\
			     HRCWL_CSB_TO_CLKIN_2X1 |\
			     HRCWL_CORE_TO_CSB_2X1)

#define CONFIG_SYS_HRCW_HIGH	(HRCWH_PCI_HOST |\
				 HRCWH_CORE_ENABLE |\
				 HRCWH_FROM_0XFFF00100 |\
				 HRCWH_BOOTSEQ_DISABLE |\
				 HRCWH_SW_WATCHDOG_DISABLE |\
				 HRCWH_ROM_LOC_LOCAL_8BIT |\
				 HRCWH_RL_EXT_LEGACY |\
				 HRCWH_TSEC1M_IN_MII |\
				 HRCWH_TSEC2M_IN_MII |\
				 HRCWH_BIG_ENDIAN)

#define CONFIG_SYS_SICRH	0x00000000
#define CONFIG_SYS_SICRL	(SICRL_LBC | SICRL_SPI_D)

#define CONFIG_HWCONFIG

#define CONFIG_SYS_HID0_INIT	0x000000000
#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK |\
				 HID0_ENABLE_INSTRUCTION_CACHE |\
				 HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)

#define CONFIG_SYS_HID2	(HID2_HBE | 0x00020000)

/*
 * Definitions for initial stack pointer and data area (in DCACHE )
 */
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x1000  /* End of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_SIZE	0x100
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
					 - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * Local Bus LCRR and LBCR regs
 */
#define CONFIG_SYS_LCRR_EADC		LCRR_EADC_1
#define CONFIG_SYS_LCRR_CLKDIV		LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR		(0x00040000 |\
					 (0xFF << LBCR_BMT_SHIFT) |\
					 0xF)

#define CONFIG_SYS_LBC_MRTPR		0x20000000

/*
 * Internal Definitions
 */
/*
 * DDR Setup
 */
#define CONFIG_SYS_DDR_BASE		0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE

/*
 * Manually set up DDR parameters,
 * as this board has not the SPD connected to I2C.
 */
#define CONFIG_SYS_DDR_SIZE		256		/* MB */
#define CONFIG_SYS_DDR_CONFIG		(CSCONFIG_EN |\
					 0x00010000 |\
					 CSCONFIG_ROW_BIT_13 |\
					 CSCONFIG_COL_BIT_10)

#define CONFIG_SYS_DDR_CONFIG_256	(CONFIG_SYS_DDR_CONFIG | \
					 CSCONFIG_BANK_BIT_3)

#define CONFIG_SYS_DDR_TIMING_3	(1 << 16)	/* ext refrec */
#define CONFIG_SYS_DDR_TIMING_0	((3 << TIMING_CFG0_RWT_SHIFT) |\
				(3 << TIMING_CFG0_WRT_SHIFT) |\
				(3 << TIMING_CFG0_RRT_SHIFT) |\
				(3 << TIMING_CFG0_WWT_SHIFT) |\
				(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) |\
				(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) |\
				(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
				(2 << TIMING_CFG0_MRS_CYC_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1	((4 << TIMING_CFG1_PRETOACT_SHIFT) |\
				(12 << TIMING_CFG1_ACTTOPRE_SHIFT) |\
				(4 << TIMING_CFG1_ACTTORW_SHIFT) |\
				(7 << TIMING_CFG1_CASLAT_SHIFT) |\
				(4 << TIMING_CFG1_REFREC_SHIFT) |\
				(4 << TIMING_CFG1_WRREC_SHIFT) |\
				(2 << TIMING_CFG1_ACTTOACT_SHIFT) |\
				(2 << TIMING_CFG1_WRTORD_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) |\
				(5 << TIMING_CFG2_CPO_SHIFT) |\
				(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) |\
				(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) |\
				(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) |\
				(1 << TIMING_CFG2_CKE_PLS_SHIFT) |\
				(6 << TIMING_CFG2_FOUR_ACT_SHIFT))

#define CONFIG_SYS_DDR_INTERVAL	((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) |\
				(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))

#define CONFIG_SYS_SDRAM_CFG		(SDRAM_CFG_SREN |\
					 SDRAM_CFG_2T_EN | SDRAM_CFG_HSE |\
					 SDRAM_CFG_DBW_32 |\
					 SDRAM_CFG_SDRAM_TYPE_DDR2)

#define CONFIG_SYS_SDRAM_CFG2		0x00401000
#define CONFIG_SYS_DDR_MODE		((0x0448 << SDRAM_MODE_ESD_SHIFT) |\
					 (0x0242 << SDRAM_MODE_SD_SHIFT))
#define CONFIG_SYS_DDR_MODE_2		0x00000000
#define CONFIG_SYS_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_EN |\
					 DDRCDR_PZ_NOMZ |\
					 DDRCDR_NZ_NOMZ |\
					 DDRCDR_ODT |\
					 DDRCDR_M_ODR |\
					 DDRCDR_Q_DRN)

/*
 * on-board devices
 */
#define CONFIG_TSEC1
#define CONFIG_TSEC2
#define CONFIG_TSEC_ENET
#define CONFIG_HARD_SPI
#define CONFIG_HARD_I2C

/*
 * NOR FLASH setup
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
#define CONFIG_FLASH_SHOW_PROGRESS	50
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_SYS_FLASH_BASE		0xFF800000
#define CONFIG_SYS_FLASH_SIZE		8
#define CONFIG_SYS_FLASH_PROTECTION

#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016

#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR0_PRELIM		(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
					 OR_GPCM_SCY_10 |\
					 OR_GPCM_EHTR |\
					 OR_GPCM_TRLX |\
					 OR_GPCM_CSNT |\
					 OR_GPCM_EAD)
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128

#define CONFIG_SYS_FLASH_ERASE_TOUT	60000
#define CONFIG_SYS_FLASH_WRITE_TOUT	500

/*
 * NAND FLASH setup
 */
#define CONFIG_SYS_NAND_BASE		0xE1000000
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_SYS_NAND_PAGE_SIZE	(2048)
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
#define NAND_CACHE_PAGES		64

#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E
#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
#define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR1_PRELIM

#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_NAND_BASE) |\
				 (2<<BR_DECC_SHIFT) |\
				 BR_PS_8 |\
				 BR_MS_FCM |\
				 BR_V)

#define CONFIG_SYS_OR1_PRELIM	(0xFFFF8000 |\
				 OR_FCM_PGS |\
				 OR_FCM_CSCT |\
				 OR_FCM_CST |\
				 OR_FCM_CHT |\
				 OR_FCM_SCY_4 |\
				 OR_FCM_TRLX |\
				 OR_FCM_EHTR |\
				 OR_FCM_RST)

/*
 * MRAM setup
 */
#define CONFIG_SYS_MRAM_BASE		0xE2000000
#define CONFIG_SYS_MRAM_SIZE		0x20000	/* 128 Kb */
#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_MRAM_BASE
#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010	/* 128 Kb  */

#define CONFIG_SYS_OR_TIMING_MRAM

#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_MRAM_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR2_PRELIM		0xFFFE0C74

/*
 * CPLD setup
 */
#define CONFIG_SYS_CPLD_BASE		0xE3000000
#define CONFIG_SYS_CPLD_SIZE		0x8000
#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_CPLD_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000E

#define CONFIG_SYS_OR_TIMING_MRAM

#define CONFIG_SYS_BR3_PRELIM		(CONFIG_SYS_CPLD_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR3_PRELIM		0xFFFF8814

/*
 * HW-Watchdog
 */
#define CONFIG_WATCHDOG		1
#define CONFIG_SYS_WATCHDOG_VALUE	0xFFFF

/*
 * I2C setup
 */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
#define CONFIG_RTC_PCF8563
#define CONFIG_SYS_I2C_RTC_ADDR	0x51

/*
 * SPI setup
 */
#ifdef CONFIG_HARD_SPI
#define CONFIG_MPC8XXX_SPI
#define CONFIG_CMD_SPI
#define CONFIG_SYS_GPIO1_PRELIM
#define CONFIG_SYS_GPIO1_DIR		0x00000001
#define CONFIG_SYS_GPIO1_DAT		0x00000001
#endif

/*
 * Ethernet setup
 */
#ifdef CONFIG_TSEC1
#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME		"TSEC0"
#define CONFIG_SYS_TSEC1_OFFSET	0x24000
#define TSEC1_PHY_ADDR			0x1
#define TSEC1_FLAGS			TSEC_GIGABIT
#define TSEC1_PHYIDX			0
#endif

#ifdef CONFIG_TSEC2
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME		"TSEC1"
#define CONFIG_SYS_TSEC2_OFFSET	0x25000
#define TSEC2_PHY_ADDR			0x3
#define TSEC2_FLAGS			TSEC_GIGABIT
#define TSEC2_PHYIDX			0
#endif
#define CONFIG_ETHPRIME		"TSEC1"

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
#define CONFIG_SYS_NS16550_CLK		(CONFIG_83XX_CLKIN * 2)

#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_SYS_SCCR_USBDRCM	3

/*
 * BAT's
 */
#define CONFIG_HIGH_BATS

/* DDR @ 0x00000000 */
#define CONFIG_SYS_IBAT0L		(CONFIG_SYS_SDRAM_BASE |\
					 BATL_PP_10)
#define CONFIG_SYS_IBAT0U		(CONFIG_SYS_SDRAM_BASE |\
					 BATU_BL_256M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT0L		CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U		CONFIG_SYS_IBAT0U

/* Initial RAM @ 0xFD000000 */
#define CONFIG_SYS_IBAT1L		(CONFIG_SYS_INIT_RAM_ADDR |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT1U		(CONFIG_SYS_INIT_RAM_ADDR |\
					 BATU_BL_256K |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT1L		CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U		CONFIG_SYS_IBAT1U

/* FLASH @ 0xFF800000 */
#define CONFIG_SYS_IBAT2L		(CONFIG_SYS_FLASH_BASE |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT2U		(CONFIG_SYS_FLASH_BASE |\
					 BATU_BL_8M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT2L		(CONFIG_SYS_FLASH_BASE |\
					 BATL_PP_10 |\
					 BATL_CACHEINHIBIT |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U		CONFIG_SYS_IBAT2U

#define CONFIG_SYS_IBAT3L		(0)
#define CONFIG_SYS_IBAT3U		(0)
#define CONFIG_SYS_DBAT3L		CONFIG_SYS_IBAT3L
#define CONFIG_SYS_DBAT3U		CONFIG_SYS_IBAT3U

#define CONFIG_SYS_IBAT4L		(0)
#define CONFIG_SYS_IBAT4U		(0)
#define CONFIG_SYS_DBAT4L		CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U		CONFIG_SYS_IBAT4U

/* IMMRBAR @ 0xF0000000 */
#define CONFIG_SYS_IBAT5L		(CONFIG_SYS_IMMR |\
					 BATL_PP_10 |\
					 BATL_CACHEINHIBIT |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT5U		(CONFIG_SYS_IMMR |\
					 BATU_BL_128M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT5L		CONFIG_SYS_IBAT5L
#define CONFIG_SYS_DBAT5U		CONFIG_SYS_IBAT5U

/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
#define CONFIG_SYS_IBAT6L		(0xE0000000 |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT6U		(0xE0000000 |\
					 BATU_BL_256M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT6L		CONFIG_SYS_IBAT6L
#define CONFIG_SYS_DBAT6U		CONFIG_SYS_IBAT6U

#define CONFIG_SYS_IBAT7L		(0)
#define CONFIG_SYS_IBAT7U		(0)
#define CONFIG_SYS_DBAT7L		CONFIG_SYS_IBAT7L
#define CONFIG_SYS_DBAT7U		CONFIG_SYS_IBAT7U

/*
 * U-Boot environment setup
 */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_NAND
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_MII
#define CONFIG_CMD_DATE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMD_JFFS2
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/*
 * The reserved memory
 */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(8 * 1024 * 1024)

/*
 * Environment Configuration
 */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE \
				+ CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE		0x20000
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)


#define CONFIG_NETDEV			eth1
#define CONFIG_HOSTNAME		ids8313
#define CONFIG_ROOTPATH		"/opt/eldk-4.2/ppc_6xx"
#define CONFIG_BOOTFILE		"ids8313/uImage"
#define CONFIG_UBOOTPATH		"ids8313/u-boot.bin"
#define CONFIG_FDTFILE			"ids8313/ids8313.dtb"
#define CONFIG_LOADADDR		0x400000
#define CONFIG_CMD_ENV_FLAGS
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"

#define CONFIG_BAUDRATE		115200

/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
					 + sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

#define CONFIG_SYS_MEMTEST_START	0x00001000
#define CONFIG_SYS_MEMTEST_END		0x00C00000

#define CONFIG_SYS_LOAD_ADDR		0x100000
#define CONFIG_MII
#define CONFIG_LOADS_ECHO
#define CONFIG_TIMESTAMP
#define CONFIG_PREBOOT			"echo;" \
					"echo Type \\\"run nfsboot\\\" " \
					"to mount root filesystem over NFS;echo"
#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND		"run boot_cramfs"
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE

#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_DEV		"0"

/* mtdparts command line support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT		"nor0=ff800000.flash,nand0=e1000000.flash"
#define MTDPARTS_DEFAULT	"mtdparts=ff800000.flash:7m(dum)," \
					"768k(BOOT-BIN)," \
					"128k(BOOT-ENV),128k(BOOT-REDENV);" \
					"e1000000.flash:-(ubi)"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
	"ethprime=TSEC1\0"						\
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
	"tftpflash=tftpboot ${loadaddr} ${uboot}; "			\
		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" +${filesize}; "					\
		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
		" +${filesize}; "					\
		"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" ${filesize}; "					\
		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
		" +${filesize}; "					\
		"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" ${filesize}\0"					\
	"console=ttyS0\0"						\
	"fdtaddr=0x780000\0"						\
	"kernel_addr=ff800000\0"					\
	"fdtfile=" __stringify(CONFIG_FDTFILE) "\0"			\
	"setbootargs=setenv bootargs "					\
		"root=${rootdev} rw console=${console},"		\
			"${baudrate} ${othbootargs}\0"			\
	"setipargs=setenv bootargs root=${rootdev} rw "			\
			"nfsroot=${serverip}:${rootpath} "		\
			"ip=${ipaddr}:${serverip}:${gatewayip}:"	\
			"${netmask}:${hostname}:${netdev}:off "		\
			"console=${console},${baudrate} ${othbootargs}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"mtdids=" MTDIDS_DEFAULT "\0"					\
	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
	"\0"

#define CONFIG_NFSBOOTCOMMAND						\
	"setenv rootdev /dev/nfs;"					\
	"run setipargs;run addmtd;"					\
	"tftp ${loadaddr} ${bootfile};"				\
	"tftp ${fdtaddr} ${fdtfile};"					\
	"fdt addr ${fdtaddr};"						\
	"bootm ${loadaddr} - ${fdtaddr}"

/* UBI Support */
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_MTD_PARTITIONS

/* bootcount support */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_I2C
#define CONFIG_BOOTCOUNT_ALEN	1
#define CONFIG_SYS_BOOTCOUNT_ADDR	0x9

#define CONFIG_VERSION_VARIABLE

#define CONFIG_IMAGE_FORMAT_LEGACY
#define CONFIG_CMD_FDT
#define CONFIG_CMD_HASH
#define CONFIG_SHA1
#define CONFIG_SHA256

#endif	/* __CONFIG_H */
Commit	Line	Data
eaf8c986 HS	1	/*
	2	* (C) Copyright 2013
	3	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* Copyright (c) 2011 IDS GmbH, Germany
	7	* Sergej Stepanov <ste@ids.de>
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	/*
	16	* High Level Configuration Options
	17	*/
	18	#define CONFIG_MPC831x
	19	#define CONFIG_MPC8313
	20	#define CONFIG_IDS8313
	21
03838059 HS	22	#define CONFIG_SYS_GENERIC_BOARD
03838059 HS	23
eaf8c986 HS	24	#define CONFIG_FSL_ELBC
	25
	26	#define CONFIG_MISC_INIT_R
	27
eaf8c986 HS	28	#define CONFIG_BOOT_RETRY_TIME 900
	29	#define CONFIG_BOOT_RETRY_MIN 30
	30	#define CONFIG_BOOTDELAY 1
	31	#define CONFIG_RESET_TO_RETRY
	32
	33	#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
	34	#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
	35
	36	#define CONFIG_SYS_IMMR 0xF0000000
	37
	38	#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
	39	#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
	40
	41	/*
	42	* Hardware Reset Configuration Word
	43	* if CLKIN is 66.000MHz, then
	44	* CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
	45	*/
	46	#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ \|\
	47	HRCWL_DDR_TO_SCB_CLK_2X1 \|\
	48	HRCWL_CSB_TO_CLKIN_2X1 \|\
	49	HRCWL_CORE_TO_CSB_2X1)
	50
	51	#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST \|\
	52	HRCWH_CORE_ENABLE \|\
	53	HRCWH_FROM_0XFFF00100 \|\
	54	HRCWH_BOOTSEQ_DISABLE \|\
	55	HRCWH_SW_WATCHDOG_DISABLE \|\
	56	HRCWH_ROM_LOC_LOCAL_8BIT \|\
	57	HRCWH_RL_EXT_LEGACY \|\
	58	HRCWH_TSEC1M_IN_MII \|\
	59	HRCWH_TSEC2M_IN_MII \|\
	60	HRCWH_BIG_ENDIAN)
	61
	62	#define CONFIG_SYS_SICRH 0x00000000
	63	#define CONFIG_SYS_SICRL (SICRL_LBC \| SICRL_SPI_D)
	64
	65	#define CONFIG_HWCONFIG
	66
	67	#define CONFIG_SYS_HID0_INIT 0x000000000
	68	#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \|\
	69	HID0_ENABLE_INSTRUCTION_CACHE \|\
	70	HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)
	71
	72	#define CONFIG_SYS_HID2 (HID2_HBE \| 0x00020000)
	73
	74	/*
	75	* Definitions for initial stack pointer and data area (in DCACHE )
	76	*/
	77	#define CONFIG_SYS_INIT_RAM_LOCK
	78	#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000
	79	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */
	80	#define CONFIG_SYS_GBL_DATA_SIZE 0x100
	81	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
	82	- CONFIG_SYS_GBL_DATA_SIZE)
	83	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	84
	85	/*
	86	* Local Bus LCRR and LBCR regs
	87	*/
	88	#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
	89	#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
	90	#define CONFIG_SYS_LBC_LBCR (0x00040000 \|\
	91	(0xFF << LBCR_BMT_SHIFT) \|\
92	0xF)
93
94	#define CONFIG_SYS_LBC_MRTPR 0x20000000
95
96	/*
97	* Internal Definitions
98	*/
99	/*
100	* DDR Setup
101	*/
102	#define CONFIG_SYS_DDR_BASE 0x00000000
103	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
104	#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
105
106	/*
107	* Manually set up DDR parameters,
108	* as this board has not the SPD connected to I2C.
109	*/
110	#define CONFIG_SYS_DDR_SIZE 256 /* MB */
111	#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \|\
112	0x00010000 \|\
113	CSCONFIG_ROW_BIT_13 \|\
114	CSCONFIG_COL_BIT_10)
115
116	#define CONFIG_SYS_DDR_CONFIG_256 (CONFIG_SYS_DDR_CONFIG \| \
117	CSCONFIG_BANK_BIT_3)
118
119	#define CONFIG_SYS_DDR_TIMING_3 (1 << 16) /* ext refrec */
120	#define CONFIG_SYS_DDR_TIMING_0 ((3 << TIMING_CFG0_RWT_SHIFT) \|\
121	(3 << TIMING_CFG0_WRT_SHIFT) \|\
122	(3 << TIMING_CFG0_RRT_SHIFT) \|\
123	(3 << TIMING_CFG0_WWT_SHIFT) \|\
124	(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \|\
125	(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \|\
126	(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \| \
127	(2 << TIMING_CFG0_MRS_CYC_SHIFT))
128	#define CONFIG_SYS_DDR_TIMING_1 ((4 << TIMING_CFG1_PRETOACT_SHIFT) \|\
129	(12 << TIMING_CFG1_ACTTOPRE_SHIFT) \|\
130	(4 << TIMING_CFG1_ACTTORW_SHIFT) \|\
131	(7 << TIMING_CFG1_CASLAT_SHIFT) \|\
132	(4 << TIMING_CFG1_REFREC_SHIFT) \|\
133	(4 << TIMING_CFG1_WRREC_SHIFT) \|\
134	(2 << TIMING_CFG1_ACTTOACT_SHIFT) \|\
135	(2 << TIMING_CFG1_WRTORD_SHIFT))
136	#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \|\
137	(5 << TIMING_CFG2_CPO_SHIFT) \|\
138	(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \|\
139	(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \|\
140	(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \|\
141	(1 << TIMING_CFG2_CKE_PLS_SHIFT) \|\
142	(6 << TIMING_CFG2_FOUR_ACT_SHIFT))
143
144	#define CONFIG_SYS_DDR_INTERVAL ((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) \|\
145	(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
146
147	#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \|\
148	SDRAM_CFG_2T_EN \| SDRAM_CFG_HSE \|\
149	SDRAM_CFG_DBW_32 \|\
150	SDRAM_CFG_SDRAM_TYPE_DDR2)
151
152	#define CONFIG_SYS_SDRAM_CFG2 0x00401000
153	#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \|\
154	(0x0242 << SDRAM_MODE_SD_SHIFT))
155	#define CONFIG_SYS_DDR_MODE_2 0x00000000
156	#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
157	#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \|\
158	DDRCDR_PZ_NOMZ \|\
159	DDRCDR_NZ_NOMZ \|\
160	DDRCDR_ODT \|\
161	DDRCDR_M_ODR \|\
162	DDRCDR_Q_DRN)
163
164	/*
165	* on-board devices
166	*/
167	#define CONFIG_TSEC1
168	#define CONFIG_TSEC2
169	#define CONFIG_TSEC_ENET
eaf8c986 HS	170	#define CONFIG_HARD_SPI
	171	#define CONFIG_HARD_I2C
	172
	173	/*
	174	* NOR FLASH setup
	175	*/
	176	#define CONFIG_SYS_FLASH_CFI
	177	#define CONFIG_FLASH_CFI_DRIVER
	178	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
	179	#define CONFIG_FLASH_SHOW_PROGRESS 50
	180	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	181
	182	#define CONFIG_SYS_FLASH_BASE 0xFF800000
	183	#define CONFIG_SYS_FLASH_SIZE 8
	184	#define CONFIG_SYS_FLASH_PROTECTION
	185
	186	#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
	187	#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016
	188
	189	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \|\
	190	BR_PS_8 \|\
	191	BR_MS_GPCM \|\
	192	BR_V)
	193
	194	#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \|\
	195	OR_GPCM_SCY_10 \|\
	196	OR_GPCM_EHTR \|\
	197	OR_GPCM_TRLX \|\
	198	OR_GPCM_CSNT \|\
	199	OR_GPCM_EAD)
	200	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	201	#define CONFIG_SYS_MAX_FLASH_SECT 128
	202
	203	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
	204	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	205
	206	/*
	207	* NAND FLASH setup
	208	*/
	209	#define CONFIG_SYS_NAND_BASE 0xE1000000
	210	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	211	#define CONFIG_SYS_NAND_MAX_CHIPS 1
eaf8c986 HS	212	#define CONFIG_NAND_FSL_ELBC
	213	#define CONFIG_SYS_NAND_PAGE_SIZE (2048)
	214	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
	215	#define NAND_CACHE_PAGES 64
	216
	217	#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
	218	#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E
	219	#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
	220	#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
	221
	222	#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) \|\
	223	(2<<BR_DECC_SHIFT) \|\
	224	BR_PS_8 \|\
	225	BR_MS_FCM \|\
	226	BR_V)
	227
	228	#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 \|\
	229	OR_FCM_PGS \|\
	230	OR_FCM_CSCT \|\
	231	OR_FCM_CST \|\
	232	OR_FCM_CHT \|\
	233	OR_FCM_SCY_4 \|\
	234	OR_FCM_TRLX \|\
	235	OR_FCM_EHTR \|\
	236	OR_FCM_RST)
	237
	238	/*
	239	* MRAM setup
	240	*/
	241	#define CONFIG_SYS_MRAM_BASE 0xE2000000
	242	#define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */
	243	#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_MRAM_BASE
	244	#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* 128 Kb */
	245
	246	#define CONFIG_SYS_OR_TIMING_MRAM
	247
	248	#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_MRAM_BASE \|\
	249	BR_PS_8 \|\
	250	BR_MS_GPCM \|\
	251	BR_V)
	252
	253	#define CONFIG_SYS_OR2_PRELIM 0xFFFE0C74
	254
	255	/*
	256	* CPLD setup
	257	*/
	258	#define CONFIG_SYS_CPLD_BASE 0xE3000000
	259	#define CONFIG_SYS_CPLD_SIZE 0x8000
	260	#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CPLD_BASE
	261	#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E
	262
	263	#define CONFIG_SYS_OR_TIMING_MRAM
	264
	265	#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CPLD_BASE \|\
	266	BR_PS_8 \|\
	267	BR_MS_GPCM \|\
	268	BR_V)
	269
	270	#define CONFIG_SYS_OR3_PRELIM 0xFFFF8814
	271
	272	/*
	273	* HW-Watchdog
	274	*/
	275	#define CONFIG_WATCHDOG 1
276	#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
277
278	/*
279	* I2C setup
280	*/
281	#define CONFIG_CMD_I2C
282	#define CONFIG_SYS_I2C
283	#define CONFIG_SYS_I2C_FSL
284	#define CONFIG_SYS_FSL_I2C_SPEED 400000
285	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
286	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100
287	#define CONFIG_RTC_PCF8563
288	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
289
290	/*
291	* SPI setup
292	*/
293	#ifdef CONFIG_HARD_SPI
294	#define CONFIG_MPC8XXX_SPI
295	#define CONFIG_CMD_SPI
296	#define CONFIG_SYS_GPIO1_PRELIM
297	#define CONFIG_SYS_GPIO1_DIR 0x00000001
298	#define CONFIG_SYS_GPIO1_DAT 0x00000001
299	#endif
300
301	/*
302	* Ethernet setup
303	*/
304	#ifdef CONFIG_TSEC1
305	#define CONFIG_HAS_ETH0
306	#define CONFIG_TSEC1_NAME "TSEC0"
307	#define CONFIG_SYS_TSEC1_OFFSET 0x24000
308	#define TSEC1_PHY_ADDR 0x1
309	#define TSEC1_FLAGS TSEC_GIGABIT
310	#define TSEC1_PHYIDX 0
311	#endif
312
313	#ifdef CONFIG_TSEC2
314	#define CONFIG_HAS_ETH1
315	#define CONFIG_TSEC2_NAME "TSEC1"
316	#define CONFIG_SYS_TSEC2_OFFSET 0x25000
317	#define TSEC2_PHY_ADDR 0x3
318	#define TSEC2_FLAGS TSEC_GIGABIT
319	#define TSEC2_PHYIDX 0
320	#endif
321	#define CONFIG_ETHPRIME "TSEC1"
322
323	/*
324	* Serial Port
325	*/
326	#define CONFIG_CONS_INDEX 1
327	#define CONFIG_SYS_NS16550
328	#define CONFIG_SYS_NS16550_SERIAL
329	#define CONFIG_SYS_NS16550_REG_SIZE 1
330
331	#define CONFIG_SYS_BAUDRATE_TABLE \
332	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
333	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
334	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
335	#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
336
337	#define CONFIG_HAS_FSL_DR_USB
338	#define CONFIG_SYS_SCCR_USBDRCM 3
339
340	/*
341	* BAT's
342	*/
343	#define CONFIG_HIGH_BATS
344
345	/* DDR @ 0x00000000 */
346	#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \|\
347	BATL_PP_10)
348	#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \|\
349	BATU_BL_256M \|\
350	BATU_VS \|\
351	BATU_VP)
352	#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
353	#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
354
355	/* Initial RAM @ 0xFD000000 */
356	#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR \|\
357	BATL_PP_10 \|\
358	BATL_GUARDEDSTORAGE)
359	#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR \|\
360	BATU_BL_256K \|\
361	BATU_VS \|\
362	BATU_VP)
363	#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
364	#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
365
366	/* FLASH @ 0xFF800000 */
367	#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE \|\
368	BATL_PP_10 \|\
369	BATL_GUARDEDSTORAGE)
370	#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE \|\
371	BATU_BL_8M \|\
372	BATU_VS \|\
373	BATU_VP)
374	#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE \|\
375	BATL_PP_10 \|\
376	BATL_CACHEINHIBIT \|\
377	BATL_GUARDEDSTORAGE)
378	#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
379
380	#define CONFIG_SYS_IBAT3L (0)
381	#define CONFIG_SYS_IBAT3U (0)
382	#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
383	#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
384
385	#define CONFIG_SYS_IBAT4L (0)
386	#define CONFIG_SYS_IBAT4U (0)
387	#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
388	#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
389
390	/* IMMRBAR @ 0xF0000000 */
391	#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \|\
392	BATL_PP_10 \|\
393	BATL_CACHEINHIBIT \|\
394	BATL_GUARDEDSTORAGE)
395	#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \|\
396	BATU_BL_128M \|\
397	BATU_VS \|\
398	BATU_VP)
399	#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
400	#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
401
402	/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
403	#define CONFIG_SYS_IBAT6L (0xE0000000 \|\
404	BATL_PP_10 \|\
405	BATL_GUARDEDSTORAGE)
406	#define CONFIG_SYS_IBAT6U (0xE0000000 \|\
407	BATU_BL_256M \|\
408	BATU_VS \|\
409	BATU_VP)
410	#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
411	#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
412
413	#define CONFIG_SYS_IBAT7L (0)
414	#define CONFIG_SYS_IBAT7U (0)
415	#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
416	#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
417
418	/*
419	* U-Boot environment setup
420	*/
eaf8c986 HS	421	#define CONFIG_CMD_DHCP
eaf8c986 HS	422	#define CONFIG_CMD_PING
eaf8c986	423	#define CONFIG_CMD_NAND
eaf8c986 HS	424	#define CONFIG_CMD_SNTP
	425	#define CONFIG_CMD_MII
	426	#define CONFIG_CMD_DATE
	427	#define CONFIG_CMDLINE_EDITING
eaf8c986 HS	428	#define CONFIG_CMD_JFFS2
	429	#define CONFIG_BOOTP_SUBNETMASK
	430	#define CONFIG_BOOTP_GATEWAY
	431	#define CONFIG_BOOTP_HOSTNAME
	432	#define CONFIG_BOOTP_BOOTPATH
	433	#define CONFIG_BOOTP_BOOTFILESIZE
	434	/* pass open firmware flat tree */
	435	#define CONFIG_OF_LIBFDT
	436	#define CONFIG_OF_BOARD_SETUP
	437	#define CONFIG_OF_STDOUT_VIA_ALIAS
	438
	439	/*
	440	* The reserved memory
	441	*/
	442	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	443	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
	444	#define CONFIG_SYS_MALLOC_LEN (8 * 1024 * 1024)
	445
	446	/*
	447	* Environment Configuration
	448	*/
	449	#define CONFIG_ENV_IS_IN_FLASH
	450	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
	451	+ CONFIG_SYS_MONITOR_LEN)
	452	#define CONFIG_ENV_SIZE 0x20000
	453	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
	454	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	455
	456
	457	#define CONFIG_NETDEV eth1
	458	#define CONFIG_HOSTNAME ids8313
	459	#define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx"
	460	#define CONFIG_BOOTFILE "ids8313/uImage"
	461	#define CONFIG_UBOOTPATH "ids8313/u-boot.bin"
	462	#define CONFIG_FDTFILE "ids8313/ids8313.dtb"
	463	#define CONFIG_LOADADDR 0x400000
	464	#define CONFIG_CMD_ENV_FLAGS
	465	#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
	466
	467	#define CONFIG_BAUDRATE 115200
eaf8c986 HS	468
	469	/* Initial Memory map for Linux*/
	470	#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
	471
	472	/*
	473	* Miscellaneous configurable options
	474	*/
	475	#define CONFIG_SYS_LONGHELP
eaf8c986 HS	476	#define CONFIG_SYS_CBSIZE 1024
	477	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
	478	+ sizeof(CONFIG_SYS_PROMPT)+16)
	479	#define CONFIG_SYS_MAXARGS 16
	480	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	481	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	482	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	483
	484	#define CONFIG_SYS_MEMTEST_START 0x00001000
	485	#define CONFIG_SYS_MEMTEST_END 0x00C00000
	486
	487	#define CONFIG_SYS_LOAD_ADDR 0x100000
	488	#define CONFIG_MII
	489	#define CONFIG_LOADS_ECHO
	490	#define CONFIG_TIMESTAMP
	491	#define CONFIG_PREBOOT "echo;" \
	492	"echo Type \\\"run nfsboot\\\" " \
	493	"to mount root filesystem over NFS;echo"
	494	#undef CONFIG_BOOTARGS
	495	#define CONFIG_BOOTCOMMAND "run boot_cramfs"
	496	#undef CONFIG_SYS_LOADS_BAUD_CHANGE
	497
	498	#define CONFIG_JFFS2_NAND
	499	#define CONFIG_JFFS2_DEV "0"
	500
	501	/* mtdparts command line support */
	502	#define CONFIG_CMD_MTDPARTS
	503	#define CONFIG_FLASH_CFI_MTD
	504	#define CONFIG_MTD_DEVICE
	505	#define MTDIDS_DEFAULT "nor0=ff800000.flash,nand0=e1000000.flash"
	506	#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:7m(dum)," \
	507	"768k(BOOT-BIN)," \
	508	"128k(BOOT-ENV),128k(BOOT-REDENV);" \
	509	"e1000000.flash:-(ubi)"
	510
	511	#define CONFIG_EXTRA_ENV_SETTINGS \
	512	"netdev=" __stringify(CONFIG_NETDEV) "\0" \
	513	"ethprime=TSEC1\0" \
	514	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	515	"tftpflash=tftpboot ${loadaddr} ${uboot}; " \
	516	"protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
	517	" +${filesize}; " \
	518	"erase " __stringify(CONFIG_SYS_TEXT_BASE) \
	519	" +${filesize}; " \
	520	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
	521	" ${filesize}; " \
	522	"protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
	523	" +${filesize}; " \
	524	"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
	525	" ${filesize}\0" \
	526	"console=ttyS0\0" \
	527	"fdtaddr=0x780000\0" \
	528	"kernel_addr=ff800000\0" \
	529	"fdtfile=" __stringify(CONFIG_FDTFILE) "\0" \
	530	"setbootargs=setenv bootargs " \
	531	"root=${rootdev} rw console=${console}," \
	532	"${baudrate} ${othbootargs}\0" \
	533	"setipargs=setenv bootargs root=${rootdev} rw " \
	534	"nfsroot=${serverip}:${rootpath} " \
	535	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	536	"${netmask}:${hostname}:${netdev}:off " \
	537	"console=${console},${baudrate} ${othbootargs}\0" \
	538	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	539	"mtdids=" MTDIDS_DEFAULT "\0" \
540	"mtdparts=" MTDPARTS_DEFAULT "\0" \
541	"\0"
542
543	#define CONFIG_NFSBOOTCOMMAND \
544	"setenv rootdev /dev/nfs;" \
545	"run setipargs;run addmtd;" \
546	"tftp ${loadaddr} ${bootfile};" \
547	"tftp ${fdtaddr} ${fdtfile};" \
548	"fdt addr ${fdtaddr};" \
549	"bootm ${loadaddr} - ${fdtaddr}"
550
551	/* UBI Support */
552	#define CONFIG_CMD_NAND_TRIMFFS
553	#define CONFIG_CMD_UBI
554	#define CONFIG_CMD_UBIFS
555	#define CONFIG_RBTREE
556	#define CONFIG_LZO
557	#define CONFIG_MTD_PARTITIONS
558
559	/* bootcount support */
560	#define CONFIG_BOOTCOUNT_LIMIT
561	#define CONFIG_BOOTCOUNT_I2C
562	#define CONFIG_BOOTCOUNT_ALEN 1
563	#define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
564
565	#define CONFIG_VERSION_VARIABLE
566
d835e91d	567	#define CONFIG_IMAGE_FORMAT_LEGACY
eaf8c986 HS	568	#define CONFIG_CMD_FDT
eaf8c986 HS	569	#define CONFIG_CMD_HASH
eaf8c986 HS	570	#define CONFIG_SHA1
eaf8c986 HS	571	#define CONFIG_SHA256
eaf8c986 HS	572
eaf8c986 HS	573	#endif /* __CONFIG_H */