[people/ms/u-boot.git] / include / configs / imx6_logic.h

/*
 * Copyright (C) 2017 Logic PD, Inc.
 *
 * Configuration settings for the LogicPD i.MX6 SOM.
 *
 * SPDX-License-Identifier:    GPL-2.0+
 */

#ifndef __IMX6LOGIC_CONFIG_H
#define __IMX6LOGIC_CONFIG_H

#define CONFIG_MXC_UART_BASE   UART1_BASE
#define CONSOLE_DEV            "ttymxc0"

#include <config_distro_defaults.h>
#include "mx6_common.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)

#define CONFIG_MXC_UART

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2
#define CONFIG_MMCROOT         "/dev/mmcblk1p2" /* Dev kit SD card */

/* Ethernet Configs */
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE            RMII
#define CONFIG_ETHPRIME                "FEC"
#define CONFIG_FEC_MXC_PHYADDR         0
#define CONFIG_PHY_SMSC

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"bootm_size=0x10000000\0" \
	"fdt_addr_r=0x18000000\0" \
	"fdt_addr=0x18000000\0" \
	"ramdisk_addr_r=0x13000000\0" \
	"ramdiskaddr=0x13000000\0" \
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"ramdisk_file=rootfs.cpio.uboot\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"mmcdev=1\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate}" \
	" root=${mmcroot} ${mtdparts}\0" \
	"nandargs=setenv bootargs console=${console},${baudrate}" \
	" ubi.mtd=fs root=${nandroot} ${mtdparts}\0" \
	"ramargs=setenv bootargs console=${console},${baudrate}" \
	" root=/dev/ram rw ${mtdparts}\0"                    \
	"loadbootscript=" \
	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...;" \
	" source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \
	" setenv kernelsize ${filesize}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdiskaddr}" \
	" ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \
	"mmcboot=echo Booting from mmc...; run mmcargs; run loadimage;" \
	" run loadfdt; bootz ${loadaddr} - ${fdt_addr}\0" \
	"mmcramboot=run ramargs; run loadimage;" \
	" run loadfdt; run loadramdisk;" \
	" bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
	"nandboot=echo Booting from nand ...; " \
	" run nandargs;" \
	" nand read ${loadaddr} kernel ${kernelsize};" \
	" nand read ${fdt_addr} dtb;" \
	" bootz ${loadaddr} - ${fdt_addr}\0" \
	"nandramboot=echo Booting RAMdisk from nand ...; " \
	" nand read ${ramdiskaddr} fs ${ramdisksize};" \
	" nand read ${loadaddr} kernel ${kernelsize};" \
	" nand read ${fdt_addr} dtb;" \
	" run ramargs;" \
	" bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/nfs" \
	" ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
		"setenv get_cmd dhcp; " \
	"else " \
		"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${image}; " \
	"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
		"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
			"bootz ${loadaddr} - ${fdt_addr}; " \
		"else " \
			"if test ${boot_fdt} = try; then " \
				"bootz; " \
				"else " \
				"echo WARN: Cannot load the DT; " \
			"fi; " \
		"fi; " \
	"else " \
	       "bootz; " \
	"fi;\0" \
	"autoboot=mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
		"if run loadimage; then " \
			"run mmcboot; " \
		"else run netboot; " \
		"fi; " \
	"fi; " \
	"else run netboot; fi"
#define CONFIG_BOOTCOMMAND \
	"run autoboot"

#define CONFIG_ARP_TIMEOUT     200UL

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE                        (8 * 1024)
#define CONFIG_ENV_OFFSET             0x400000
#define CONFIG_ENV_SECT_SIZE          CONFIG_ENV_SIZE

/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE     1
#define CONFIG_SYS_NAND_BASE           0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000

/* MTD device */
# define CONFIG_MTD_DEVICE
# define CONFIG_MTD_PARTITIONS
# define MTDIDS_DEFAULT		"nand0=gpmi-nand"
# define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:4m(uboot)," \
					"1m(env),16m(kernel),1m(dtb),-(fs)"

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* EEPROM  contains serial no, MAC addr and other Logic PD info */
#define CONFIG_I2C_EEPROM

#endif                         /* __IMX6LOGIC_CONFIG_H */
Commit	Line	Data
f479cec3 AF	1	/*
	2	* Copyright (C) 2017 Logic PD, Inc.
	3	*
	4	* Configuration settings for the LogicPD i.MX6 SOM.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __IMX6LOGIC_CONFIG_H
	10	#define __IMX6LOGIC_CONFIG_H
	11
	12	#define CONFIG_MXC_UART_BASE UART1_BASE
	13	#define CONSOLE_DEV "ttymxc0"
	14
	15	#include <config_distro_defaults.h>
	16	#include "mx6_common.h"
	17
	18	/* Size of malloc() pool */
	19	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	20
	21	#define CONFIG_MXC_UART
	22
	23	/* MMC Configs */
	24	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	25	#define CONFIG_SYS_FSL_USDHC_NUM 2
	26	#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* Dev kit SD card */
	27
	28	/* Ethernet Configs */
	29	#define CONFIG_MII
	30	#define CONFIG_FEC_XCV_TYPE RMII
	31	#define CONFIG_ETHPRIME "FEC"
	32	#define CONFIG_FEC_MXC_PHYADDR 0
f479cec3 AF	33	#define CONFIG_PHY_SMSC
f479cec3 AF	34
f479cec3 AF	35	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	36
	37	#define CONFIG_EXTRA_ENV_SETTINGS \
	38	"script=boot.scr\0" \
	39	"image=zImage\0" \
	40	"bootm_size=0x10000000\0" \
	41	"fdt_addr_r=0x18000000\0" \
	42	"fdt_addr=0x18000000\0" \
	43	"ramdisk_addr_r=0x13000000\0" \
	44	"ramdiskaddr=0x13000000\0" \
	45	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	46	"ramdisk_file=rootfs.cpio.uboot\0" \
	47	"boot_fdt=try\0" \
	48	"ip_dyn=yes\0" \
	49	"console=" CONSOLE_DEV "\0" \
	50	"mmcdev=1\0" \
	51	"mmcpart=1\0" \
	52	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	53	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
	54	"mmcargs=setenv bootargs console=${console},${baudrate}" \
	55	" root=${mmcroot} ${mtdparts}\0" \
	56	"nandargs=setenv bootargs console=${console},${baudrate}" \
	57	" ubi.mtd=fs root=${nandroot} ${mtdparts}\0" \
	58	"ramargs=setenv bootargs console=${console},${baudrate}" \
	59	" root=/dev/ram rw ${mtdparts}\0" \
	60	"loadbootscript=" \
	61	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	62	"bootscript=echo Running bootscript from mmc ...;" \
	63	" source\0" \
	64	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \
	65	" setenv kernelsize ${filesize}\0" \
	66	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	67	"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdiskaddr}" \
	68	" ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \
	69	"mmcboot=echo Booting from mmc...; run mmcargs; run loadimage;" \
	70	" run loadfdt; bootz ${loadaddr} - ${fdt_addr}\0" \
	71	"mmcramboot=run ramargs; run loadimage;" \
	72	" run loadfdt; run loadramdisk;" \
	73	" bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
	74	"nandboot=echo Booting from nand ...; " \
	75	" run nandargs;" \
	76	" nand read ${loadaddr} kernel ${kernelsize};" \
	77	" nand read ${fdt_addr} dtb;" \
	78	" bootz ${loadaddr} - ${fdt_addr}\0" \
	79	"nandramboot=echo Booting RAMdisk from nand ...; " \
	80	" nand read ${ramdiskaddr} fs ${ramdisksize};" \
	81	" nand read ${loadaddr} kernel ${kernelsize};" \
	82	" nand read ${fdt_addr} dtb;" \
	83	" run ramargs;" \
	84	" bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
	85	"netargs=setenv bootargs console=${console},${baudrate} " \
	86	"root=/dev/nfs" \
	87	" ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	88	"netboot=echo Booting from net ...; " \
	89	"run netargs; " \
	90	"if test ${ip_dyn} = yes; then " \
	91	"setenv get_cmd dhcp; " \
	92	"else " \
	93	"setenv get_cmd tftp; " \
	94	"fi; " \
	95	"${get_cmd} ${image}; " \
	96	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	97	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	98	"bootz ${loadaddr} - ${fdt_addr}; " \
99	"else " \
100	"if test ${boot_fdt} = try; then " \
101	"bootz; " \
102	"else " \
103	"echo WARN: Cannot load the DT; " \
104	"fi; " \
105	"fi; " \
106	"else " \
107	"bootz; " \
108	"fi;\0" \
109	"autoboot=mmc dev ${mmcdev};" \
110	"if mmc rescan; then " \
111	"if run loadbootscript; then " \
112	"run bootscript; " \
113	"else " \
114	"if run loadimage; then " \
115	"run mmcboot; " \
116	"else run netboot; " \
117	"fi; " \
118	"fi; " \
119	"else run netboot; fi"
120	#define CONFIG_BOOTCOMMAND \
121	"run autoboot"
122
123	#define CONFIG_ARP_TIMEOUT 200UL
124
125	#define CONFIG_SYS_MEMTEST_START 0x10000000
126	#define CONFIG_SYS_MEMTEST_END 0x10010000
127	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
128
f479cec3 AF	129	/* Physical Memory Map */
	130	#define CONFIG_NR_DRAM_BANKS 1
	131	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	132	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	133	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	134	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	135
	136	#define CONFIG_SYS_INIT_SP_OFFSET \
	137	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	138	#define CONFIG_SYS_INIT_SP_ADDR \
	139	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	140
	141	/* Environment organization */
	142	#define CONFIG_ENV_SIZE (8 * 1024)
f479cec3 AF	143	#define CONFIG_ENV_OFFSET 0x400000
	144	#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
	145
	146	/* NAND stuff */
f479cec3 AF	147	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	148	#define CONFIG_SYS_NAND_BASE 0x40000000
	149	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	150	#define CONFIG_SYS_NAND_ONFI_DETECTION
	151	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	152	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
	153
	154	/* MTD device */
	155	# define CONFIG_MTD_DEVICE
f479cec3 AF	156	# define CONFIG_MTD_PARTITIONS
	157	# define MTDIDS_DEFAULT "nand0=gpmi-nand"
	158	# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:4m(uboot)," \
	159	"1m(env),16m(kernel),1m(dtb),-(fs)"
	160
	161	/* DMA stuff, needed for GPMI/MXS NAND support */
	162	#define CONFIG_APBH_DMA
	163	#define CONFIG_APBH_DMA_BURST
	164	#define CONFIG_APBH_DMA_BURST8
	165
	166	/* EEPROM contains serial no, MAC addr and other Logic PD info */
	167	#define CONFIG_I2C_EEPROM
	168
	169	#endif /* __IMX6LOGIC_CONFIG_H */