[thirdparty/u-boot.git] / include / configs / imx8qxp_mek.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2018 NXP
 */

#ifndef __IMX8QXP_MEK_H
#define __IMX8QXP_MEK_H

#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_MAX_SIZE				(124 * 1024)
#define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x250
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		0

#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
#define CONFIG_SPL_STACK		0x013E000
#define CONFIG_SPL_BSS_START_ADDR	0x00128000
#define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
#define CONFIG_SYS_SPL_MALLOC_START	0x00120000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
#define CONFIG_SERIAL_LPUART_BASE	0x5a060000
#define CONFIG_MALLOC_F_ADDR		0x00120000

#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE

#define CONFIG_SPL_ABORT_ON_RAW_IMAGE

#define CONFIG_OF_EMBED
#endif

#define CONFIG_REMAKE_ELF

#define CONFIG_BOARD_EARLY_INIT_F

/* Flat Device Tree Definitions */
#define CONFIG_OF_BOARD_SETUP

#undef CONFIG_CMD_EXPORTENV
#undef CONFIG_CMD_IMPORTENV
#undef CONFIG_CMD_IMLS

#undef CONFIG_CMD_CRC32
#undef CONFIG_BOOTM_NETBSD

#define CONFIG_SYS_FSL_ESDHC_ADDR       0
#define USDHC1_BASE_ADDR                0x5B010000
#define USDHC2_BASE_ADDR                0x5B020000

#define CONFIG_ENV_OVERWRITE

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"script=boot.scr\0" \
	"image=Image\0" \
	"panel=NULL\0" \
	"console=ttyLP0,${baudrate} earlycon\0" \
	"fdt_addr=0x83000000\0"			\
	"fdt_high=0xffffffffffffffff\0"		\
	"boot_fdt=try\0" \
	"fdt_file=imx8qxp-mek.dtb\0" \
	"initrd_addr=0x83800000\0"		\
	"initrd_high=0xffffffffffffffff\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"booti ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"echo WARN: Cannot load the DT; " \
			"fi; " \
		"else " \
			"echo wait for boot; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs;  " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${loadaddr} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"booti ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"echo WARN: Cannot load the DT; " \
			"fi; " \
		"else " \
			"booti; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else booti ${loadaddr} - ${fdt_addr}; fi"

/* Link Definitions */
#define CONFIG_LOADADDR			0x80280000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_SYS_INIT_SP_ADDR         0x80200000

/* Default environment is in SD */
#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_ENV_OFFSET		(64 * SZ_64K)
#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */

#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)

#define CONFIG_SYS_SDRAM_BASE		0x80000000
#define PHYS_SDRAM_1			0x80000000
#define PHYS_SDRAM_2			0x880000000
#define PHYS_SDRAM_1_SIZE		0x80000000	/* 2 GB */
/* LPDDR4 board total DDR is 3GB */
#define PHYS_SDRAM_2_SIZE		0x40000000	/* 1 GB */

/* Serial */
#define CONFIG_BAUDRATE			115200

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		8000000	/* 8MHz */

#ifndef CONFIG_DM_PCA953X
#define CONFIG_PCA953X
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#endif

/* Networking */
#define CONFIG_FEC_XCV_TYPE		RGMII
#define FEC_QUIRK_ENET_MAC

#endif /* __IMX8QXP_MEK_H */
Commit	Line	Data
d0dd7397 PF	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* Copyright 2018 NXP
	4	*/
	5
	6	#ifndef __IMX8QXP_MEK_H
	7	#define __IMX8QXP_MEK_H
	8
	9	#include <linux/sizes.h>
	10	#include <asm/arch/imx-regs.h>
	11
018e3fd2	12	#ifdef CONFIG_SPL_BUILD
018e3fd2 PF	13	#define CONFIG_SPL_MAX_SIZE (124 * 1024)
	14	#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
	15	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
	16	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250
	17	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
	18
	19	#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
	20	#define CONFIG_SPL_STACK 0x013E000
	21	#define CONFIG_SPL_BSS_START_ADDR 0x00128000
	22	#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
	23	#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
	24	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
	25	#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
018e3fd2 PF	26	#define CONFIG_MALLOC_F_ADDR 0x00120000
	27
	28	#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
	29
	30	#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
	31
	32	#define CONFIG_OF_EMBED
	33	#endif
	34
d0dd7397 PF	35	#define CONFIG_REMAKE_ELF
	36
	37	#define CONFIG_BOARD_EARLY_INIT_F
	38
	39	/* Flat Device Tree Definitions */
	40	#define CONFIG_OF_BOARD_SETUP
	41
	42	#undef CONFIG_CMD_EXPORTENV
	43	#undef CONFIG_CMD_IMPORTENV
	44	#undef CONFIG_CMD_IMLS
	45
	46	#undef CONFIG_CMD_CRC32
	47	#undef CONFIG_BOOTM_NETBSD
	48
d0dd7397 PF	49	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	50	#define USDHC1_BASE_ADDR 0x5B010000
	51	#define USDHC2_BASE_ADDR 0x5B020000
d0dd7397 PF	52
	53	#define CONFIG_ENV_OVERWRITE
	54
	55	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	56
	57	/* Initial environment variables */
	58	#define CONFIG_EXTRA_ENV_SETTINGS \
	59	"script=boot.scr\0" \
	60	"image=Image\0" \
	61	"panel=NULL\0" \
3b9ac541	62	"console=ttyLP0,${baudrate} earlycon\0" \
d0dd7397 PF	63	"fdt_addr=0x83000000\0" \
	64	"fdt_high=0xffffffffffffffff\0" \
	65	"boot_fdt=try\0" \
3b9ac541	66	"fdt_file=imx8qxp-mek.dtb\0" \
d0dd7397 PF	67	"initrd_addr=0x83800000\0" \
	68	"initrd_high=0xffffffffffffffff\0" \
	69	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	70	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	71	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	72	"mmcautodetect=yes\0" \
	73	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
	74	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	75	"bootscript=echo Running bootscript from mmc ...; " \
	76	"source\0" \
	77	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	78	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	79	"mmcboot=echo Booting from mmc ...; " \
	80	"run mmcargs; " \
	81	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	82	"if run loadfdt; then " \
	83	"booti ${loadaddr} - ${fdt_addr}; " \
	84	"else " \
	85	"echo WARN: Cannot load the DT; " \
	86	"fi; " \
	87	"else " \
	88	"echo wait for boot; " \
	89	"fi;\0" \
	90	"netargs=setenv bootargs console=${console} " \
	91	"root=/dev/nfs " \
	92	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	93	"netboot=echo Booting from net ...; " \
	94	"run netargs; " \
	95	"if test ${ip_dyn} = yes; then " \
	96	"setenv get_cmd dhcp; " \
	97	"else " \
	98	"setenv get_cmd tftp; " \
	99	"fi; " \
	100	"${get_cmd} ${loadaddr} ${image}; " \
	101	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	102	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	103	"booti ${loadaddr} - ${fdt_addr}; " \
	104	"else " \
	105	"echo WARN: Cannot load the DT; " \
	106	"fi; " \
	107	"else " \
	108	"booti; " \
	109	"fi;\0"
	110
	111	#define CONFIG_BOOTCOMMAND \
	112	"mmc dev ${mmcdev}; if mmc rescan; then " \
	113	"if run loadbootscript; then " \
	114	"run bootscript; " \
	115	"else " \
	116	"if run loadimage; then " \
	117	"run mmcboot; " \
	118	"else run netboot; " \
	119	"fi; " \
	120	"fi; " \
	121	"else booti ${loadaddr} - ${fdt_addr}; fi"
	122
	123	/* Link Definitions */
	124	#define CONFIG_LOADADDR 0x80280000
	125
	126	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	127
	128	#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
	129
	130	/* Default environment is in SD */
131	#define CONFIG_ENV_SIZE 0x1000
132	#define CONFIG_ENV_OFFSET (64 * SZ_64K)
133	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
134
135	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
136
137	/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
138	#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
139	#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
140	#define CONFIG_SYS_FSL_USDHC_NUM 2
141
142	/* Size of malloc() pool */
143	#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
144
145	#define CONFIG_SYS_SDRAM_BASE 0x80000000
146	#define PHYS_SDRAM_1 0x80000000
147	#define PHYS_SDRAM_2 0x880000000
148	#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
149	/* LPDDR4 board total DDR is 3GB */
150	#define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */
151
152	/* Serial */
153	#define CONFIG_BAUDRATE 115200
154
d0dd7397 PF	155	/* Generic Timer Definitions */
	156	#define COUNTER_FREQUENCY 8000000 /* 8MHz */
	157
	158	#ifndef CONFIG_DM_PCA953X
	159	#define CONFIG_PCA953X
	160	#define CONFIG_CMD_PCA953X
	161	#define CONFIG_CMD_PCA953X_INFO
	162	#endif
	163
	164	/* Networking */
	165	#define CONFIG_FEC_XCV_TYPE RGMII
	166	#define FEC_QUIRK_ENET_MAC
	167
	168	#endif /* __IMX8QXP_MEK_H */