[people/ms/u-boot.git] / include / configs / integratorap.h

/*
 * (C) Copyright 2003
 * Texas Instruments.
 * Kshitij Gupta <kshitij@ti.com>
 * Configuation settings for the TI OMAP Innovator board.
 *
 * (C) Copyright 2004
 * ARM Ltd.
 * Philippe Robin, <philippe.robin@arm.com>
 * Configuration for Integrator AP board.
 *.
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H
/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_SYS_MEMTEST_START	0x100000
#define CONFIG_SYS_MEMTEST_END		0x10000000
#define CONFIG_SYS_HZ			1000
#define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
#define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1		       */

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_MISC_INIT_R	1	/* call misc_init_r during start up */

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_CM_INIT		1
#define CONFIG_CM_REMAP		1
#undef CONFIG_CM_SPD_DETECT

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

/*
 * PL010 Configuration
 */
#define CONFIG_PL010_SERIAL
#define CONFIG_CONS_INDEX	0
#define CONFIG_BAUDRATE		38400
#define CONFIG_PL01x_PORTS	{ (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0		0x16000000
#define CONFIG_SYS_SERIAL1		0x17000000

/*#define CONFIG_NET_MULTI */


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */

#define CONFIG_CMD_IMI
#define CONFIG_CMD_BDI
#define CONFIG_CMD_MEMORY


#define CONFIG_BOOTDELAY	2
#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
#define CONFIG_BOOTCOMMAND	""

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP	/* undef to save memory	    */
#define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */

#define CONFIG_SYS_FLASH_BASE	0x24000000

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
#define CONFIG_SYS_MAX_FLASH_SECT	128
#define CONFIG_ENV_SIZE			32768


/*-----------------------------------------------------------------------
 * PCI definitions
 */

#ifdef CONFIG_PCI			/* pci support	*/
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
#define DEBUG

#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/

#define INTEGRATOR_BOOT_ROM_BASE	0x20000000
#define INTEGRATOR_HDR0_SDRAM_BASE	0x80000000

/* PCI Base area */
#define INTEGRATOR_PCI_BASE		0x40000000
#define INTEGRATOR_PCI_SIZE		0x3FFFFFFF

/* memory map as seen by the CPU on the local bus */
#define CPU_PCI_IO_ADRS		0x60000000	/* PCI I/O space base */
#define CPU_PCI_IO_SIZE		0x10000

#define CPU_PCI_CNFG_ADRS	0x61000000	/* PCI config space */
#define CPU_PCI_CNFG_SIZE	0x1000000

#define PCI_MEM_BASE		0x40000000   /* 512M to xxx */
/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
#define INTEGRATOR_PCI_IO_BASE	0x60000000   /* 16M to xxx */
/*  unused (128-16)M from B1000000-B7FFFFFF */
#define PCI_CONFIG_BASE		0x61000000   /* 16M to xxx */
/*  unused ((128-16)M - 64K) from XXX */

#define PCI_V3_BASE		0x62000000

/* V3 PCI bridge controller */
#define V3_BASE			0x62000000    /* V360EPC registers */

#define PCI_ENET0_IOADDR	(CPU_PCI_IO_ADRS)
#define PCI_ENET0_MEMADDR	(PCI_MEM_BASE)


#define V3_PCI_VENDOR		0x00000000
#define V3_PCI_DEVICE		0x00000002
#define V3_PCI_CMD		0x00000004
#define V3_PCI_STAT		0x00000006
#define V3_PCI_CC_REV		0x00000008
#define V3_PCI_HDR_CF		0x0000000C
#define V3_PCI_IO_BASE		0x00000010
#define V3_PCI_BASE0		0x00000014
#define V3_PCI_BASE1		0x00000018
#define V3_PCI_SUB_VENDOR	0x0000002C
#define V3_PCI_SUB_ID		0x0000002E
#define V3_PCI_ROM		0x00000030
#define V3_PCI_BPARAM		0x0000003C
#define V3_PCI_MAP0		0x00000040
#define V3_PCI_MAP1		0x00000044
#define V3_PCI_INT_STAT		0x00000048
#define V3_PCI_INT_CFG		0x0000004C
#define V3_LB_BASE0		0x00000054
#define V3_LB_BASE1		0x00000058
#define V3_LB_MAP0		0x0000005E
#define V3_LB_MAP1		0x00000062
#define V3_LB_BASE2		0x00000064
#define V3_LB_MAP2		0x00000066
#define V3_LB_SIZE		0x00000068
#define V3_LB_IO_BASE		0x0000006E
#define V3_FIFO_CFG		0x00000070
#define V3_FIFO_PRIORITY	0x00000072
#define V3_FIFO_STAT		0x00000074
#define V3_LB_ISTAT		0x00000076
#define V3_LB_IMASK		0x00000077
#define V3_SYSTEM		0x00000078
#define V3_LB_CFG		0x0000007A
#define V3_PCI_CFG		0x0000007C
#define V3_DMA_PCI_ADR0		0x00000080
#define V3_DMA_PCI_ADR1		0x00000090
#define V3_DMA_LOCAL_ADR0	0x00000084
#define V3_DMA_LOCAL_ADR1	0x00000094
#define V3_DMA_LENGTH0		0x00000088
#define V3_DMA_LENGTH1		0x00000098
#define V3_DMA_CSR0		0x0000008B
#define V3_DMA_CSR1		0x0000009B
#define V3_DMA_CTLB_ADR0	0x0000008C
#define V3_DMA_CTLB_ADR1	0x0000009C
#define V3_DMA_DELAY		0x000000E0
#define V3_MAIL_DATA		0x000000C0
#define V3_PCI_MAIL_IEWR	0x000000D0
#define V3_PCI_MAIL_IERD	0x000000D2
#define V3_LB_MAIL_IEWR		0x000000D4
#define V3_LB_MAIL_IERD		0x000000D6
#define V3_MAIL_WR_STAT		0x000000D8
#define V3_MAIL_RD_STAT		0x000000DA
#define V3_QBA_MAP		0x000000DC

/* SYSTEM register bits */
#define V3_SYSTEM_M_RST_OUT		(1 << 15)
#define V3_SYSTEM_M_LOCK		(1 << 14)

/*  PCI_CFG bits */
#define V3_PCI_CFG_M_RETRY_EN		(1 << 10)
#define V3_PCI_CFG_M_AD_LOW1		(1 << 9)
#define V3_PCI_CFG_M_AD_LOW0		(1 << 8)

/* PCI MAP register bits (PCI -> Local bus) */
#define V3_PCI_MAP_M_MAP_ADR		0xFFF00000
#define V3_PCI_MAP_M_RD_POST_INH	(1 << 15)
#define V3_PCI_MAP_M_ROM_SIZE		(1 << 11 | 1 << 10)
#define V3_PCI_MAP_M_SWAP		(1 << 9 | 1 << 8)
#define V3_PCI_MAP_M_ADR_SIZE		0x000000F0
#define V3_PCI_MAP_M_REG_EN		(1 << 1)
#define V3_PCI_MAP_M_ENABLE		(1 << 0)

/* 9 => 512M window size */
#define V3_PCI_MAP_M_ADR_SIZE_512M	0x00000090

/* A => 1024M window size */
#define V3_PCI_MAP_M_ADR_SIZE_1024M	0x000000A0

/* LB_BASE register bits (Local bus -> PCI) */
#define V3_LB_BASE_M_MAP_ADR		0xFFF00000
#define V3_LB_BASE_M_SWAP		(1 << 8 | 1 << 9)
#define V3_LB_BASE_M_ADR_SIZE		0x000000F0
#define V3_LB_BASE_M_PREFETCH		(1 << 3)
#define V3_LB_BASE_M_ENABLE		(1 << 0)

/* PCI COMMAND REGISTER bits */
#define V3_COMMAND_M_FBB_EN		(1 << 9)
#define V3_COMMAND_M_SERR_EN		(1 << 8)
#define V3_COMMAND_M_PAR_EN		(1 << 6)
#define V3_COMMAND_M_MASTER_EN		(1 << 2)
#define V3_COMMAND_M_MEM_EN		(1 << 1)
#define V3_COMMAND_M_IO_EN		(1 << 0)

#define INTEGRATOR_SC_BASE		0x11000000
#define INTEGRATOR_SC_PCIENABLE_OFFSET	0x18
#define INTEGRATOR_SC_PCIENABLE \
			(INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)

#endif /* CONFIG_PCI */
/*-----------------------------------------------------------------------
 * There are various dependencies on the core module (CM) fitted
 * Users should refer to their CM user guide
 * - when porting adjust u-boot/Makefile accordingly
 *   to define the necessary CONFIG_ s for the CM involved
 * see e.g. integratorcp_CM926EJ-S_config
 */
#include "armcoremodule.h"

#endif	/* __CONFIG_H */
Commit	Line	Data
3d3befa7 WD	1	/*
	2	* (C) Copyright 2003
	3	* Texas Instruments.
	4	* Kshitij Gupta <kshitij@ti.com>
	5	* Configuation settings for the TI OMAP Innovator board.
	6	*
	7	* (C) Copyright 2004
	8	* ARM Ltd.
	9	* Philippe Robin, <philippe.robin@arm.com>
	10	* Configuration for Integrator AP board.
	11	*.
	12	* See file CREDITS for list of people who contributed to this
	13	* project.
	14	*
	15	* This program is free software; you can redistribute it and/or
	16	* modify it under the terms of the GNU General Public License as
	17	* published by the Free Software Foundation; either version 2 of
	18	* the License, or (at your option) any later version.
	19	*
	20	* This program is distributed in the hope that it will be useful,
	21	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	22	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	23	* GNU General Public License for more details.
	24	*
	25	* You should have received a copy of the GNU General Public License
	26	* along with this program; if not, write to the Free Software
	27	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	28	* MA 02111-1307 USA
	29	*/
fe7eb5d8	30
3d3befa7 WD	31	#ifndef __CONFIG_H
3d3befa7 WD	32	#define __CONFIG_H
3d3befa7 WD	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
6d0f6bcf JCPV	37	#define CONFIG_SYS_MEMTEST_START 0x100000
	38	#define CONFIG_SYS_MEMTEST_END 0x10000000
	39	#define CONFIG_SYS_HZ 1000
	40	#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
	41	#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
3d3befa7 WD	42
	43	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	44	#define CONFIG_SETUP_MEMORY_TAGS 1
	45	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
0148e8cb	46
8fc3bb4b	47	#define CONFIG_SKIP_LOWLEVEL_INIT
716c1dcb WD	48	#define CONFIG_CM_INIT 1
716c1dcb WD	49	#define CONFIG_CM_REMAP 1
0148e8cb WD	50	#undef CONFIG_CM_SPD_DETECT
0148e8cb WD	51
3d3befa7 WD	52	/*
	53	* Size of malloc() pool
	54	*/
6d0f6bcf JCPV	55	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
6d0f6bcf JCPV	56	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
3d3befa7 WD	57
	58	/*
	59	* PL010 Configuration
	60	*/
48d0192f	61	#define CONFIG_PL010_SERIAL
3d3befa7	62	#define CONFIG_CONS_INDEX 0
716c1dcb	63	#define CONFIG_BAUDRATE 38400
6d0f6bcf JCPV	64	#define CONFIG_PL01x_PORTS { (void ) (CONFIG_SYS_SERIAL0), (void ) (CONFIG_SYS_SERIAL1) }
	65	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	66	#define CONFIG_SYS_SERIAL0 0x16000000
	67	#define CONFIG_SYS_SERIAL1 0x17000000
3d3befa7	68
42dfe7a1	69	/#define CONFIG_NET_MULTI /
3d3befa7	70
3d3befa7	71
079a136c JL	72	/*
	73	* BOOTP options
	74	*/
	75	#define CONFIG_BOOTP_BOOTFILESIZE
	76	#define CONFIG_BOOTP_BOOTPATH
	77	#define CONFIG_BOOTP_GATEWAY
	78	#define CONFIG_BOOTP_HOSTNAME
	79
	80
1d2c6bc4 JL	81	/*
	82	* Command line configuration.
	83	*/
	84
	85	#define CONFIG_CMD_IMI
	86	#define CONFIG_CMD_BDI
	87	#define CONFIG_CMD_MEMORY
3d3befa7	88
3d3befa7	89
716c1dcb WD	90	#define CONFIG_BOOTDELAY 2
	91	#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
	92	#define CONFIG_BOOTCOMMAND ""
3d3befa7 WD	93
	94	/*
	95	* Miscellaneous configurable options
	96	*/
6d0f6bcf JCPV	97	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	98	#define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
	99	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
3d3befa7	100	/* Print Buffer Size */
6d0f6bcf JCPV	101	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	102	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	103	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
3d3befa7	104
6d0f6bcf	105	#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
3d3befa7 WD	106
	107	/*-----------------------------------------------------------------------
	108	* Stack sizes
	109	*
	110	* The stack sizes are set up in start.S using the settings below
	111	*/
	112	#define CONFIG_STACKSIZE (1281024) / regular stack */
	113	#ifdef CONFIG_USE_IRQ
	114	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	115	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	116	#endif
	117
	118	/*-----------------------------------------------------------------------
	119	* Physical Memory Map
	120	*/
716c1dcb WD	121	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
716c1dcb WD	122	#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
3d3befa7 WD	123	#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
3d3befa7 WD	124
46937b27	125	#define CONFIG_SYS_FLASH_BASE 0x24000000
3d3befa7 WD	126
	127	/*-----------------------------------------------------------------------
	128	* FLASH and environment organization
	129	*/
46937b27 JCPV	130	#define CONFIG_SYS_FLASH_CFI 1
46937b27 JCPV	131	#define CONFIG_FLASH_CFI_DRIVER 1
93f6d725	132	#define CONFIG_ENV_IS_NOWHERE
6d0f6bcf	133	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
3d3befa7	134	/* timeout values are in ticks */
6d0f6bcf JCPV	135	#define CONFIG_SYS_FLASH_ERASE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Erase */
	136	#define CONFIG_SYS_FLASH_WRITE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Write */
	137	#define CONFIG_SYS_MAX_FLASH_SECT 128
46937b27	138	#define CONFIG_ENV_SIZE 32768
3d3befa7	139
3d3befa7 WD	140
	141	/*-----------------------------------------------------------------------
	142	* PCI definitions
	143	*/
	144
c6fadb9c	145	#ifdef CONFIG_PCI /* pci support */
3d3befa7	146	#undef CONFIG_PCI_PNP
716c1dcb	147	#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
3d3befa7 WD	148	#define DEBUG
	149
	150	#define CONFIG_EEPRO100
6d0f6bcf	151	#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
3d3befa7	152
3d3befa7	153	#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
716c1dcb	154	#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
3d3befa7	155
42dfe7a1	156	/* PCI Base area */
3d3befa7 WD	157	#define INTEGRATOR_PCI_BASE 0x40000000
	158	#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
	159
42dfe7a1	160	/* memory map as seen by the CPU on the local bus */
716c1dcb	161	#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
42dfe7a1	162	#define CPU_PCI_IO_SIZE 0x10000
3d3befa7	163
42dfe7a1	164	#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */
3d3befa7 WD	165	#define CPU_PCI_CNFG_SIZE 0x1000000
3d3befa7 WD	166
716c1dcb	167	#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
42dfe7a1	168	/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
716c1dcb	169	#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
42dfe7a1	170	/* unused (128-16)M from B1000000-B7FFFFFF */
716c1dcb	171	#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
42dfe7a1	172	/* unused ((128-16)M - 64K) from XXX */
3d3befa7	173
716c1dcb	174	#define PCI_V3_BASE 0x62000000
3d3befa7	175
42dfe7a1 WD	176	/* V3 PCI bridge controller */
42dfe7a1 WD	177	#define V3_BASE 0x62000000 /* V360EPC registers */
3d3befa7 WD	178
	179	#define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS)
	180	#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
	181
	182
716c1dcb WD	183	#define V3_PCI_VENDOR 0x00000000
	184	#define V3_PCI_DEVICE 0x00000002
	185	#define V3_PCI_CMD 0x00000004
	186	#define V3_PCI_STAT 0x00000006
	187	#define V3_PCI_CC_REV 0x00000008
	188	#define V3_PCI_HDR_CF 0x0000000C
	189	#define V3_PCI_IO_BASE 0x00000010
	190	#define V3_PCI_BASE0 0x00000014
	191	#define V3_PCI_BASE1 0x00000018
	192	#define V3_PCI_SUB_VENDOR 0x0000002C
	193	#define V3_PCI_SUB_ID 0x0000002E
	194	#define V3_PCI_ROM 0x00000030
	195	#define V3_PCI_BPARAM 0x0000003C
	196	#define V3_PCI_MAP0 0x00000040
	197	#define V3_PCI_MAP1 0x00000044
	198	#define V3_PCI_INT_STAT 0x00000048
	199	#define V3_PCI_INT_CFG 0x0000004C
	200	#define V3_LB_BASE0 0x00000054
	201	#define V3_LB_BASE1 0x00000058
	202	#define V3_LB_MAP0 0x0000005E
	203	#define V3_LB_MAP1 0x00000062
	204	#define V3_LB_BASE2 0x00000064
	205	#define V3_LB_MAP2 0x00000066
	206	#define V3_LB_SIZE 0x00000068
	207	#define V3_LB_IO_BASE 0x0000006E
	208	#define V3_FIFO_CFG 0x00000070
	209	#define V3_FIFO_PRIORITY 0x00000072
	210	#define V3_FIFO_STAT 0x00000074
	211	#define V3_LB_ISTAT 0x00000076
	212	#define V3_LB_IMASK 0x00000077
	213	#define V3_SYSTEM 0x00000078
	214	#define V3_LB_CFG 0x0000007A
	215	#define V3_PCI_CFG 0x0000007C
	216	#define V3_DMA_PCI_ADR0 0x00000080
	217	#define V3_DMA_PCI_ADR1 0x00000090
	218	#define V3_DMA_LOCAL_ADR0 0x00000084
	219	#define V3_DMA_LOCAL_ADR1 0x00000094
	220	#define V3_DMA_LENGTH0 0x00000088
	221	#define V3_DMA_LENGTH1 0x00000098
	222	#define V3_DMA_CSR0 0x0000008B
	223	#define V3_DMA_CSR1 0x0000009B
	224	#define V3_DMA_CTLB_ADR0 0x0000008C
	225	#define V3_DMA_CTLB_ADR1 0x0000009C
	226	#define V3_DMA_DELAY 0x000000E0
	227	#define V3_MAIL_DATA 0x000000C0
	228	#define V3_PCI_MAIL_IEWR 0x000000D0
	229	#define V3_PCI_MAIL_IERD 0x000000D2
	230	#define V3_LB_MAIL_IEWR 0x000000D4
	231	#define V3_LB_MAIL_IERD 0x000000D6
	232	#define V3_MAIL_WR_STAT 0x000000D8
	233	#define V3_MAIL_RD_STAT 0x000000DA
	234	#define V3_QBA_MAP 0x000000DC
3d3befa7	235
42dfe7a1	236	/* SYSTEM register bits */
716c1dcb WD	237	#define V3_SYSTEM_M_RST_OUT (1 << 15)
716c1dcb WD	238	#define V3_SYSTEM_M_LOCK (1 << 14)
3d3befa7	239
42dfe7a1	240	/* PCI_CFG bits */
716c1dcb WD	241	#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
	242	#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
	243	#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
3d3befa7	244
42dfe7a1	245	/* PCI MAP register bits (PCI -> Local bus) */
716c1dcb WD	246	#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
	247	#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
	248	#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 \| 1 << 10)
	249	#define V3_PCI_MAP_M_SWAP (1 << 9 \| 1 << 8)
	250	#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
	251	#define V3_PCI_MAP_M_REG_EN (1 << 1)
	252	#define V3_PCI_MAP_M_ENABLE (1 << 0)
3d3befa7	253
42dfe7a1	254	/* 9 => 512M window size */
716c1dcb	255	#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
3d3befa7	256
42dfe7a1	257	/* A => 1024M window size */
716c1dcb	258	#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
3d3befa7	259
42dfe7a1	260	/* LB_BASE register bits (Local bus -> PCI) */
716c1dcb WD	261	#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
	262	#define V3_LB_BASE_M_SWAP (1 << 8 \| 1 << 9)
	263	#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
	264	#define V3_LB_BASE_M_PREFETCH (1 << 3)
	265	#define V3_LB_BASE_M_ENABLE (1 << 0)
3d3befa7	266
42dfe7a1	267	/* PCI COMMAND REGISTER bits */
716c1dcb WD	268	#define V3_COMMAND_M_FBB_EN (1 << 9)
	269	#define V3_COMMAND_M_SERR_EN (1 << 8)
	270	#define V3_COMMAND_M_PAR_EN (1 << 6)
	271	#define V3_COMMAND_M_MASTER_EN (1 << 2)
	272	#define V3_COMMAND_M_MEM_EN (1 << 1)
	273	#define V3_COMMAND_M_IO_EN (1 << 0)
3d3befa7 WD	274
	275	#define INTEGRATOR_SC_BASE 0x11000000
	276	#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
	277	#define INTEGRATOR_SC_PCIENABLE \
	278	(INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
	279
c6fadb9c	280	#endif /* CONFIG_PCI */
74f4304e WD	281	/*-----------------------------------------------------------------------
	282	* There are various dependencies on the core module (CM) fitted
	283	* Users should refer to their CM user guide
	284	* - when porting adjust u-boot/Makefile accordingly
	285	* to define the necessary CONFIG_ s for the CM involved
	286	* see e.g. integratorcp_CM926EJ-S_config
	287	*/
9b880bd4	288	#include "armcoremodule.h"
74f4304e	289
716c1dcb	290	#endif /* __CONFIG_H */