]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/integratorcp.h
imx6: move MXC_GPIO define to mx6_common.h
[people/ms/u-boot.git] / include / configs / integratorcp.h
CommitLineData
3d3befa7
WD
1/*
2 * (C) Copyright 2003
3 * Texas Instruments.
4 * Kshitij Gupta <kshitij@ti.com>
5 * Configuation settings for the TI OMAP Innovator board.
6 *
7 * (C) Copyright 2004
8 * ARM Ltd.
9 * Philippe Robin, <philippe.robin@arm.com>
10 * Configuration for Compact Integrator board.
11 *
3765b3e7 12 * SPDX-License-Identifier: GPL-2.0+
3d3befa7
WD
13 */
14
15#ifndef __CONFIG_H
16#define __CONFIG_H
17
e62b008f 18#include "integrator-common.h"
7c0e483d 19
e62b008f 20/* Integrator CP-specific configuration */
6d0f6bcf 21#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
3d3befa7
WD
22
23/*
24 * Hardware drivers
25 */
7194ab80 26#define CONFIG_SMC91111
3d3befa7
WD
27#define CONFIG_SMC_USE_32_BIT
28#define CONFIG_SMC91111_BASE 0xC8000000
29#undef CONFIG_SMC91111_EXT_PHY
30
e62b008f 31/* PL011 configuration */
48d0192f 32#define CONFIG_PL011_SERIAL
6705d81e 33#define CONFIG_PL011_CLOCK 14745600
6d0f6bcf 34#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
3d3befa7 35#define CONFIG_CONS_INDEX 0
5a95f6fb 36#define CONFIG_BAUDRATE 38400
6d0f6bcf
JCPV
37#define CONFIG_SYS_SERIAL0 0x16000000
38#define CONFIG_SYS_SERIAL1 0x17000000
3d3befa7 39
5a95f6fb 40/*
1d2c6bc4
JL
41 * Command line configuration.
42 */
7c0e483d 43#include <config_cmd_default.h>
3d3befa7 44
3d3befa7 45#define CONFIG_BOOTDELAY 2
7c0e483d
LW
46#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
47#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
48#define CONFIG_SERVERIP 192.168.1.100
49#define CONFIG_IPADDR 192.168.1.104
50#define CONFIG_BOOTFILE "uImage"
74f4304e 51
3d3befa7
WD
52/*
53 * Miscellaneous configurable options
54 */
6d0f6bcf 55#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
3d3befa7 56
46937b27 57#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
a7b00a7b 58#define CONFIG_SYS_MAX_FLASH_SECT 64
5a1aceb0 59#define CONFIG_ENV_IS_IN_FLASH 1
a7b00a7b 60#define CONFIG_SYS_MONITOR_LEN 0x00100000
9b880bd4
WD
61
62/*
63 * Move up the U-Boot & monitor area if more flash is fitted.
64 * If this U-Boot is to be run on Integrators with varying flash sizes,
7817cb20 65 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
6d0f6bcf
JCPV
66 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
67 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
9b880bd4
WD
68 * embedded in the boot monitor(s) area
69 */
70#if ( PHYS_FLASH_SIZE == 0x04000000 )
71
0e8d1586 72#define CONFIG_ENV_ADDR 0x27F00000
6d0f6bcf 73#define CONFIG_SYS_MONITOR_BASE 0x27F40000
9b880bd4
WD
74
75#elif (PHYS_FLASH_SIZE == 0x02000000 )
76
0e8d1586 77#define CONFIG_ENV_ADDR 0x25F00000
6d0f6bcf 78#define CONFIG_SYS_MONITOR_BASE 0x25F40000
9b880bd4
WD
79
80#else
81
0e8d1586 82#define CONFIG_ENV_ADDR 0x24F00000
6d0f6bcf 83#define CONFIG_SYS_MONITOR_BASE 0x27F40000
9b880bd4
WD
84
85#endif
86
0e8d1586
JCPV
87#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
88#define CONFIG_ENV_SIZE 8192 /* 8KB */
9b880bd4 89
5a95f6fb 90#endif /* __CONFIG_H */