[people/ms/u-boot.git] / include / configs / jupiter.h

/*
 * (C) Copyright 2007
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
#define CONFIG_MPC5200		1	/* especially an MPC5200 */
#define CONFIG_JUPITER		1	/* ... on Jupiter board */

#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */

#define CONFIG_BOARD_EARLY_INIT_R	1
#define CONFIG_BOARD_EARLY_INIT_F	1

#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
#define BOOTFLAG_WARM		0x02	/* Software reboot	     */

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/*
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 */
/*#define CONFIG_PCI		*/

#if defined(CONFIG_PCI)
#define CONFIG_PCI_PNP		1
#define CONFIG_PCI_SCAN_SHOW	1

#define CONFIG_PCI_MEM_BUS	0x40000000
#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE	0x10000000

#define CONFIG_PCI_IO_BUS	0x50000000
#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE	0x01000000
#endif

#define CFG_XLB_PIPELINING	1

#define CONFIG_NET_MULTI	1
#define CONFIG_MII		1
#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */

/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION

#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP

#if defined(CONFIG_PCI)
#define CODFIG_CMD_PCI
#endif


/*
 * Autobooting
 */
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"flash_nfs=run nfsargs addip addcons;"				\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip;"					\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"addcons=setenv bootargs ${bootargs} console=${contyp},"	\
		"${baudrate}\0"						\
	"contyp=ttyS0\0"						\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"	\
		"bootm\0"						\
	"rootpath=/opt/eldk/ppc_6xx\0"					\
	"bootfile=/tftpboot/jupiter/uImage\0"				\
	""

#define CONFIG_BOOTCOMMAND	"run flash_self"

/*
 * IPB Bus clocking configuration.
 */
#undef CFG_IPBSPEED_133   	/* define for 133MHz speed */

#if 0
/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE	1
#define CONFIG_OF_BOARD_SETUP	1

#define OF_CPU			"PowerPC,5200@0"
#define OF_SOC			"soc5200@f0000000"
#define OF_TBCLK		(bd->bi_busfreq / 8)
#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
#endif

#if 0
/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */

#define CFG_I2C_SPEED		100000 /* 100 kHz */
#define CFG_I2C_SLAVE		0x7F

/*
 * EEPROM configuration
 */
#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
#define CFG_I2C_EEPROM_ADDR_LEN		1
#define CFG_EEPROM_PAGE_WRITE_BITS	3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
#endif

/*
 * Flash configuration
 */
#define CFG_FLASH_BASE		0xFF000000
#define CFG_FLASH_SIZE		0x01000000

#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */

#define CFG_ENV_ADDR		(TEXT_BASE + 0x40000) /* third sector */

#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */

#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks */

#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
#define CFG_UPDATE_FLASH_SIZE	1
#define CFG_FLASH_USE_BUFFER_WRITE	1

/*
 * Environment settings
 */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_SIZE		0x20000
#define CFG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_OVERWRITE	1

/* Address and size of Redundant Environment Sector	*/
#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)

/*
 * Memory map
 */
#define CFG_MBAR		0xF0000000
#define CFG_SDRAM_BASE		0x00000000
#define CFG_DEFAULT_MBAR	0x80000000

/* Use SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */


#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

#define CFG_MONITOR_BASE    TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#   define CFG_RAMBOOT		1
#endif

#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC	1
/*
 * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 */
/* #define CONFIG_FEC_10MBIT 1 */
#define CONFIG_PHY_ADDR		0x00

/*
 * GPIO configuration
 */
#define CFG_GPS_PORT_CONFIG	0x10000004

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory	    */
#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
#ifdef	CFG_HUSH_PARSER
#define	CFG_PROMPT_HUSH_PS2	"> "
#endif
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
#else
#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
#define CFG_MAXARGS		16		/* max number of command args	*/
#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
#define CFG_ALT_MEMTEST		1

#define CFG_LOAD_ADDR		0x200000	/* default load address */

#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif

/*
 * Various low-level settings
 */
#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
#define CFG_HID0_FINAL		HID0_ICE

#define CFG_BOOTCS_START	CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
#define CFG_BOOTCS_CFG		0x00047801
#define CFG_CS0_START		CFG_FLASH_BASE
#define CFG_CS0_SIZE		CFG_FLASH_SIZE

#define CFG_CS_BURST		0x00000000
#define CFG_CS_DEADCYCLE	0x33333333

#define CFG_RESET_ADDRESS	0xff000000

#endif /* __CONFIG_H */
Commit	Line	Data
2605e90b HS	1	/*
	2	* (C) Copyright 2007
	3	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	#ifndef __CONFIG_H
	25	#define __CONFIG_H
	26
	27	/*
	28	* High Level Configuration Options
	29	* (easy to change)
	30	*/
	31
	32	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	33	#define CONFIG_MPC5200 1 /* especially an MPC5200 */
	34	#define CONFIG_JUPITER 1 /* ... on Jupiter board */
	35
	36	#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
	37
	38	#define CONFIG_BOARD_EARLY_INIT_R 1
	39	#define CONFIG_BOARD_EARLY_INIT_F 1
	40
	41	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	42	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	43
2605e90b HS	44	/*
	45	* Serial console configuration
	46	*/
	47	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
	48	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	49	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
	50
	51	/*
	52	* PCI Mapping:
	53	* 0x40000000 - 0x4fffffff - PCI Memory
	54	* 0x50000000 - 0x50ffffff - PCI IO Space
	55	*/
769104c9	56	/#define CONFIG_PCI /
2605e90b HS	57
	58	#if defined(CONFIG_PCI)
	59	#define CONFIG_PCI_PNP 1
	60	#define CONFIG_PCI_SCAN_SHOW 1
	61
	62	#define CONFIG_PCI_MEM_BUS 0x40000000
	63	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	64	#define CONFIG_PCI_MEM_SIZE 0x10000000
	65
	66	#define CONFIG_PCI_IO_BUS 0x50000000
	67	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	68	#define CONFIG_PCI_IO_SIZE 0x01000000
2605e90b HS	69	#endif
	70
	71	#define CFG_XLB_PIPELINING 1
	72
	73	#define CONFIG_NET_MULTI 1
	74	#define CONFIG_MII 1
	75	#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
	76
	77	/* Partitions */
	78	#define CONFIG_MAC_PARTITION
	79	#define CONFIG_DOS_PARTITION
	80	#define CONFIG_ISO_PARTITION
	81
	82	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	83
bc234c12	84
7f5c0157 JL	85	/*
	86	* BOOTP options
	87	*/
	88	#define CONFIG_BOOTP_BOOTFILESIZE
	89	#define CONFIG_BOOTP_BOOTPATH
	90	#define CONFIG_BOOTP_GATEWAY
	91	#define CONFIG_BOOTP_HOSTNAME
	92
	93
2605e90b	94	/*
bc234c12	95	* Command line configuration.
2605e90b	96	*/
bc234c12 JL	97	#include <config_cmd_default.h>
	98
	99	#define CONFIG_CMD_NFS
	100	#define CONFIG_CMD_SNTP
2605e90b	101
7f5c0157 JL	102	#if defined(CONFIG_PCI)
	103	#define CODFIG_CMD_PCI
	104	#endif
	105
2605e90b HS	106
	107	/*
	108	* Autobooting
	109	*/
	110	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	111
	112	#define CONFIG_PREBOOT "echo;" \
	113	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	114	"echo"
	115
	116	#undef CONFIG_BOOTARGS
	117
	118	#define CONFIG_EXTRA_ENV_SETTINGS \
	119	"netdev=eth0\0" \
	120	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	121	"nfsroot=${serverip}:${rootpath}\0" \
	122	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	123	"addip=setenv bootargs ${bootargs} " \
	124	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	125	":${hostname}:${netdev}:off panic=1\0" \
a7090b99	126	"flash_nfs=run nfsargs addip addcons;" \
2605e90b HS	127	"bootm ${kernel_addr}\0" \
	128	"flash_self=run ramargs addip;" \
	129	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
a7090b99	130	"addcons=setenv bootargs ${bootargs} console=${contyp}," \
8502e30a HS	131	"${baudrate}\0" \
8502e30a HS	132	"contyp=ttyS0\0" \
a7090b99	133	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \
8502e30a HS	134	"bootm\0" \
8502e30a HS	135	"rootpath=/opt/eldk/ppc_6xx\0" \
2605e90b HS	136	"bootfile=/tftpboot/jupiter/uImage\0" \
	137	""
	138
	139	#define CONFIG_BOOTCOMMAND "run flash_self"
	140
	141	/*
	142	* IPB Bus clocking configuration.
	143	*/
	144	#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
	145
	146	#if 0
	147	/* pass open firmware flat tree */
	148	#define CONFIG_OF_FLAT_TREE 1
	149	#define CONFIG_OF_BOARD_SETUP 1
	150
2605e90b HS	151	#define OF_CPU "PowerPC,5200@0"
	152	#define OF_SOC "soc5200@f0000000"
	153	#define OF_TBCLK (bd->bi_busfreq / 8)
	154	#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
	155	#endif
	156
	157	#if 0
	158	/*
	159	* I2C configuration
	160	*/
	161	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	162	#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
	163
	164	#define CFG_I2C_SPEED 100000 /* 100 kHz */
	165	#define CFG_I2C_SLAVE 0x7F
	166
	167	/*
	168	* EEPROM configuration
	169	*/
	170	#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
	171	#define CFG_I2C_EEPROM_ADDR_LEN 1
	172	#define CFG_EEPROM_PAGE_WRITE_BITS 3
	173	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
	174	#endif
	175
	176	/*
	177	* Flash configuration
	178	*/
	179	#define CFG_FLASH_BASE 0xFF000000
	180	#define CFG_FLASH_SIZE 0x01000000
	181
	182	#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
	183
	184	#define CFG_ENV_ADDR (TEXT_BASE + 0x40000) /* third sector */
	185
	186	#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
	187	#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
	188
	189	#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
	190
	191	#define CFG_FLASH_CFI_DRIVER
	192	#define CFG_FLASH_CFI
	193	#define CFG_FLASH_EMPTY_INFO
	194	#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
	195	#define CFG_UPDATE_FLASH_SIZE 1
	196	#define CFG_FLASH_USE_BUFFER_WRITE 1
	197
	198	/*
	199	* Environment settings
	200	*/
	201	#define CFG_ENV_IS_IN_FLASH 1
	202	#define CFG_ENV_SIZE 0x20000
	203	#define CFG_ENV_SECT_SIZE 0x20000
	204	#define CONFIG_ENV_OVERWRITE 1
	205
8502e30a HS	206	/* Address and size of Redundant Environment Sector */
	207	#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
	208	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
	209
2605e90b HS	210	/*
	211	* Memory map
	212	*/
	213	#define CFG_MBAR 0xF0000000
	214	#define CFG_SDRAM_BASE 0x00000000
	215	#define CFG_DEFAULT_MBAR 0x80000000
	216
	217	/* Use SRAM until RAM will be available */
	218	#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
	219	#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
	220
	221
	222	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	223	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	224	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	225
	226	#define CFG_MONITOR_BASE TEXT_BASE
	227	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	228	# define CFG_RAMBOOT 1
	229	#endif
	230
	231	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	232	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	233	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	234
	235	/*
	236	* Ethernet configuration
	237	*/
	238	#define CONFIG_MPC5xxx_FEC 1
	239	/*
	240	* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
	241	*/
	242	/* #define CONFIG_FEC_10MBIT 1 */
	243	#define CONFIG_PHY_ADDR 0x00
	244
	245	/*
	246	* GPIO configuration
	247	*/
	248	#define CFG_GPS_PORT_CONFIG 0x10000004
	249
	250	/*
	251	* Miscellaneous configurable options
	252	*/
	253	#define CFG_LONGHELP /* undef to save memory */
	254	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
8502e30a HS	255
	256	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	257	#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
	258	#ifdef CFG_HUSH_PARSER
	259	#define CFG_PROMPT_HUSH_PS2 "> "
	260	#endif
bc234c12	261	#if defined(CONFIG_CMD_KGDB)
2605e90b HS	262	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	263	#else
	264	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	265	#endif
	266	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	267	#define CFG_MAXARGS 16 /* max number of command args */
	268	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	269
	270	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	271	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
	272	#define CFG_ALT_MEMTEST 1
	273
	274	#define CFG_LOAD_ADDR 0x200000 /* default load address */
	275
	276	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	277
bc234c12 JL	278	#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
	279	#if defined(CONFIG_CMD_KGDB)
	280	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	281	#endif
	282
2605e90b HS	283	/*
	284	* Various low-level settings
	285	*/
	286	#define CFG_HID0_INIT HID0_ICE \| HID0_ICFI
	287	#define CFG_HID0_FINAL HID0_ICE
	288
	289	#define CFG_BOOTCS_START CFG_FLASH_BASE
	290	#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
	291	#define CFG_BOOTCS_CFG 0x00047801
	292	#define CFG_CS0_START CFG_FLASH_BASE
	293	#define CFG_CS0_SIZE CFG_FLASH_SIZE
	294
	295	#define CFG_CS_BURST 0x00000000
	296	#define CFG_CS_DEADCYCLE 0x33333333
	297
	298	#define CFG_RESET_ADDRESS 0xff000000
	299
	300	#endif /* __CONFIG_H */