[thirdparty/u-boot.git] / include / configs / km_kirkwood.h

/*
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Prafulla Wadaskar <prafulla@marvell.com>
 *
 * (C) Copyright 2009
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * (C) Copyright 2011-2012
 * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * for linking errors see
 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
 */

#ifndef _CONFIG_KM_KIRKWOOD_H
#define _CONFIG_KM_KIRKWOOD_H

/* KM_KIRKWOOD */
#if defined(CONFIG_KM_KIRKWOOD)
#define CONFIG_IDENT_STRING		"\nKeymile Kirkwood"
#define CONFIG_HOSTNAME			km_kirkwood
#define CONFIG_KM_DISABLE_PCIE
#define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/

/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
#define CONFIG_IDENT_STRING		"\nKeymile Kirkwood PCI"
#define CONFIG_HOSTNAME			km_kirkwood_pci
#define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG

/* KM_NUSA */
#elif defined(CONFIG_KM_NUSA)
#define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
#define CONFIG_IDENT_STRING		"\nKeymile NUSA"
#define CONFIG_HOSTNAME			kmnusa
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG \
		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_PIGGY4_88E6352
#define CONFIG_MV88E6352_SWITCH
#define CONFIG_KM_MVEXTSW_ADDR		0x10

/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
#define CONFIG_IDENT_STRING		"\nKeymile COGE3UN"
#define CONFIG_HOSTNAME			mgcoge3un
#define KM_IVM_BUS			"pca9547:70:9" /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG \
		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
#define CONFIG_KM_BOARD_EXTRA_ENV	"waitforne=true\0"
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6061

/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
#define CONFIG_IDENT_STRING		"\nKeymile COGE5UN"
#define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
#undef	CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG \
		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET	3
#define CONFIG_HOSTNAME			kmcoge5un
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6352

/* KM_PORTL2 */
#elif defined(CONFIG_KM_PORTL2)
#define CONFIG_IDENT_STRING		"\nKeymile Port-L2"
#define CONFIG_HOSTNAME			portl2
#define KM_IVM_BUS			"pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061

/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
#define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
#define CONFIG_IDENT_STRING		"\nKeymile SUV31"
#define CONFIG_HOSTNAME			kmsuv31
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG

#else
#error ("Board unsupported")
#endif

/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"

#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
#define KM_ENV_BUS	"pca9544a:70:d"	/* I2C2 (Mux-Port 5)*/
#endif

#if defined(CONFIG_KM_PIGGY4_88E6352)
/*
 * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
 * an Marvell 88E6352 simple switch.
 * In this case we have to change the default settings for the etherent mac.
 * There is NO ethernet phy. The ARM and Switch are conencted directly over
 * RGMII in MAC-MAC mode
 * In this case 1GBit full duplex and autoneg off
 */
#define PORT_SERIAL_CONTROL_VALUE		( \
	MVGBE_FORCE_LINK_PASS			    | \
	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
	MVGBE_ADV_NO_FLOW_CTRL			    | \
	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
	MVGBE_FORCE_BP_MODE_NO_JAM		    | \
	(1 << 9) /* Reserved bit has to be 1 */	| \
	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
	MVGBE_DTE_ADV_0				        | \
	MVGBE_MIIPHY_MAC_MODE			    | \
	MVGBE_AUTO_NEG_NO_CHANGE		    | \
	MVGBE_MAX_RX_PACKET_1552BYTE		| \
	MVGBE_CLR_EXT_LOOPBACK			    | \
	MVGBE_SET_FULL_DUPLEX_MODE		    | \
	MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
	MVGBE_SET_GMII_SPEED_TO_1000	    |\
	MVGBE_SET_MII_SPEED_TO_100)

#endif

#ifdef CONFIG_KM_PIGGY4_88E6061
/*
 * Some keymile boards like mgcoge3un have their PIGGY4 connected via
 * an Marvell 88E6061 simple switch.
 * In this case we have to change the default settings for the
 * ethernet phy connected to the kirkwood.
 * In this case 100MB full duplex and autoneg off
 */
#define PORT_SERIAL_CONTROL_VALUE		( \
	MVGBE_FORCE_LINK_PASS			| \
	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
	MVGBE_ADV_NO_FLOW_CTRL			| \
	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
	MVGBE_FORCE_BP_MODE_NO_JAM		| \
	(1 << 9) /* Reserved bit has to be 1 */	| \
	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
	MVGBE_DTE_ADV_0				| \
	MVGBE_MIIPHY_MAC_MODE			| \
	MVGBE_AUTO_NEG_NO_CHANGE		| \
	MVGBE_MAX_RX_PACKET_1552BYTE		| \
	MVGBE_CLR_EXT_LOOPBACK			| \
	MVGBE_SET_FULL_DUPLEX_MODE		| \
	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
	MVGBE_SET_GMII_SPEED_TO_10_100	|\
	MVGBE_SET_MII_SPEED_TO_100)
#endif

#ifdef CONFIG_KM_DISABLE_PCI
#undef  CONFIG_KIRKWOOD_PCIE_INIT
#endif


#endif /* _CONFIG_KM_KIRKWOOD */
Commit	Line	Data
67fa8c25 HS	1	/*
	2	* (C) Copyright 2009
	3	* Marvell Semiconductor <www.marvell.com>
	4	* Prafulla Wadaskar <prafulla@marvell.com>
	5	*
	6	* (C) Copyright 2009
	7	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	8	*
8170aefc HB	9	* (C) Copyright 2011-2012
	10	* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
	11	* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
83b40c31	12	*
1a459660	13	* SPDX-License-Identifier: GPL-2.0+
67fa8c25 HS	14	*/
	15
	16	/*
	17	* for linking errors see
	18	* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
	19	*/
	20
83b40c31 HB	21	#ifndef _CONFIG_KM_KIRKWOOD_H
83b40c31 HB	22	#define _CONFIG_KM_KIRKWOOD_H
67fa8c25	23
48ced62c	24	/* KM_KIRKWOOD */
e29c6d04	25	#if defined(CONFIG_KM_KIRKWOOD)
8170aefc	26	#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
d9354530	27	#define CONFIG_HOSTNAME km_kirkwood
48ced62c	28	#define CONFIG_KM_DISABLE_PCIE
8170aefc	29	#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
48ced62c HB	30
48ced62c HB	31	/* KM_KIRKWOOD_PCI */
e29c6d04	32	#elif defined(CONFIG_KM_KIRKWOOD_PCI)
8170aefc	33	#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
d9354530	34	#define CONFIG_HOSTNAME km_kirkwood_pci
8170aefc	35	#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
48ced62c HB	36	#define CONFIG_KM_FPGA_CONFIG
48ced62c HB	37
8170aefc HB	38	/* KM_NUSA */
	39	#elif defined(CONFIG_KM_NUSA)
	40	#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
	41	#define CONFIG_IDENT_STRING "\nKeymile NUSA"
d9354530	42	#define CONFIG_HOSTNAME kmnusa
8170aefc HB	43	#undef CONFIG_SYS_KWD_CONFIG
	44	#define CONFIG_SYS_KWD_CONFIG \
	45	$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
	46	#define CONFIG_KM_ENV_IS_IN_SPI_NOR
	47	#define CONFIG_KM_FPGA_CONFIG
	48	#define CONFIG_KM_PIGGY4_88E6352
be3e8be0 VL	49	#define CONFIG_MV88E6352_SWITCH
be3e8be0 VL	50	#define CONFIG_KM_MVEXTSW_ADDR 0x10
8170aefc	51
f945439a HB	52	/* KM_MGCOGE3UN */
	53	#elif defined(CONFIG_KM_MGCOGE3UN)
	54	#define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
	55	#define CONFIG_HOSTNAME mgcoge3un
	56	#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
	57	#undef CONFIG_SYS_KWD_CONFIG
	58	#define CONFIG_SYS_KWD_CONFIG \
	59	$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
	60	#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
	61	#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
	62	#define CONFIG_KM_DISABLE_PCIE
	63	#define CONFIG_KM_PIGGY4_88E6061
	64
	65	/* KMCOGE5UN */
d9354530 HB	66	#elif defined(CONFIG_KM_COGE5UN)
	67	#define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
	68	#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
	69	#undef CONFIG_SYS_KWD_CONFIG
	70	#define CONFIG_SYS_KWD_CONFIG \
	71	$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
	72	#define CONFIG_KM_ENV_IS_IN_SPI_NOR
	73	#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
	74	#define CONFIG_HOSTNAME kmcoge5un
	75	#define CONFIG_KM_DISABLE_PCIE
	76	#define CONFIG_KM_PIGGY4_88E6352
6ef64861 HB	77
	78	/* KM_PORTL2 */
	79	#elif defined(CONFIG_KM_PORTL2)
	80	#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
	81	#define CONFIG_HOSTNAME portl2
	82	#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
	83	#define CONFIG_KM_PIGGY4_88E6061
	84
90639fea HB	85	/* KM_SUV31 */
	86	#elif defined(CONFIG_KM_SUV31)
	87	#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
	88	#define CONFIG_IDENT_STRING "\nKeymile SUV31"
	89	#define CONFIG_HOSTNAME kmsuv31
	90	#define CONFIG_KM_ENV_IS_IN_SPI_NOR
	91	#define CONFIG_KM_FPGA_CONFIG
	92
8170aefc HB	93	#else
8170aefc HB	94	#error ("Board unsupported")
83b40c31	95	#endif
67fa8c25	96
8170aefc HB	97	/* include common defines/options for all arm based Keymile boards */
	98	#include "km/km_arm.h"
	99
8170aefc	100	#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
731b9680	101	#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
8170aefc HB	102	#endif
	103
	104	#if defined(CONFIG_KM_PIGGY4_88E6352)
	105	/*
	106	* Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
	107	* an Marvell 88E6352 simple switch.
	108	* In this case we have to change the default settings for the etherent mac.
	109	* There is NO ethernet phy. The ARM and Switch are conencted directly over
	110	* RGMII in MAC-MAC mode
	111	* In this case 1GBit full duplex and autoneg off
	112	*/
	113	#define PORT_SERIAL_CONTROL_VALUE ( \
	114	MVGBE_FORCE_LINK_PASS \| \
	115	MVGBE_DIS_AUTO_NEG_FOR_DUPLX \| \
	116	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL \| \
	117	MVGBE_ADV_NO_FLOW_CTRL \| \
	118	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX \| \
	119	MVGBE_FORCE_BP_MODE_NO_JAM \| \
	120	(1 << 9) /* Reserved bit has to be 1 */ \| \
	121	MVGBE_DO_NOT_FORCE_LINK_FAIL \| \
	122	MVGBE_DIS_AUTO_NEG_SPEED_GMII \| \
	123	MVGBE_DTE_ADV_0 \| \
	124	MVGBE_MIIPHY_MAC_MODE \| \
	125	MVGBE_AUTO_NEG_NO_CHANGE \| \
	126	MVGBE_MAX_RX_PACKET_1552BYTE \| \
	127	MVGBE_CLR_EXT_LOOPBACK \| \
	128	MVGBE_SET_FULL_DUPLEX_MODE \| \
	129	MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX \|\
	130	MVGBE_SET_GMII_SPEED_TO_1000 \|\
	131	MVGBE_SET_MII_SPEED_TO_100)
	132
	133	#endif
731b9680	134
f945439a HB	135	#ifdef CONFIG_KM_PIGGY4_88E6061
	136	/*
	137	* Some keymile boards like mgcoge3un have their PIGGY4 connected via
	138	* an Marvell 88E6061 simple switch.
	139	* In this case we have to change the default settings for the
	140	* ethernet phy connected to the kirkwood.
	141	* In this case 100MB full duplex and autoneg off
	142	*/
	143	#define PORT_SERIAL_CONTROL_VALUE ( \
	144	MVGBE_FORCE_LINK_PASS \| \
	145	MVGBE_DIS_AUTO_NEG_FOR_DUPLX \| \
	146	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL \| \
	147	MVGBE_ADV_NO_FLOW_CTRL \| \
	148	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX \| \
	149	MVGBE_FORCE_BP_MODE_NO_JAM \| \
	150	(1 << 9) /* Reserved bit has to be 1 */ \| \
	151	MVGBE_DO_NOT_FORCE_LINK_FAIL \| \
	152	MVGBE_DIS_AUTO_NEG_SPEED_GMII \| \
	153	MVGBE_DTE_ADV_0 \| \
	154	MVGBE_MIIPHY_MAC_MODE \| \
	155	MVGBE_AUTO_NEG_NO_CHANGE \| \
	156	MVGBE_MAX_RX_PACKET_1552BYTE \| \
	157	MVGBE_CLR_EXT_LOOPBACK \| \
	158	MVGBE_SET_FULL_DUPLEX_MODE \| \
	159	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX \|\
	160	MVGBE_SET_GMII_SPEED_TO_10_100 \|\
	161	MVGBE_SET_MII_SPEED_TO_100)
	162	#endif
	163
f945439a HB	164	#ifdef CONFIG_KM_DISABLE_PCI
	165	#undef CONFIG_KIRKWOOD_PCIE_INIT
	166	#endif
b37f7724	167
b37f7724	168
83b40c31	169	#endif /* _CONFIG_KM_KIRKWOOD */