[people/ms/u-boot.git] / include / configs / lart.h

/*
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * Configuation settings for the LART board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_SA1100		1	/* This is an SA1100 CPU	*/
#define CONFIG_LART		1	/* on an LART Board      */

#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

/*
 * Hardware drivers
 */
#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
#define CS8900_BASE		0x20008300
#define CS8900_BUS16		1

/*
 * select serial console configuration
 */
#define CONFIG_SA1100_SERIAL
#define CONFIG_SERIAL3          1	/* we use SERIAL 3 on LART */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_BAUDRATE		9600


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>


#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTARGS		"root=ramfs devfs=mount console=ttySA0,9600"
#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
#define CONFIG_NETMASK          255.255.0.0
#define CONFIG_IPADDR		172.22.2.131
#define CONFIG_SERVERIP		172.22.2.126
#define CONFIG_BOOTFILE		"elinos-lart"
#define CONFIG_BOOTCOMMAND	"tftp; bootm"

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
#endif

/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT		"LART # "	/* Monitor Command Prompt	*/
#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/

#define	CONFIG_SYS_LOAD_ADDR		0xc8000000	/* default load address	*/

#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
#define CONFIG_SYS_CPUSPEED		0x0b		/* set core clock to 220 MHz */

						/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x00800000 /* 8 MB */
#define PHYS_SDRAM_2		0xc1000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE	0x00800000 /* 8 MB */
#define PHYS_SDRAM_3            0xc8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE       0x00800000 /* 8 MB */
#define PHYS_SDRAM_4            0xc9000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE       0x00800000 /* 8 MB */


#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */

#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	(31+8)	/* max number of sectors on one chip	*/

/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */

#define	CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

#endif	/* __CONFIG_H */
Commit	Line	Data
da27dcf0 WD	1	/*
	2	* (C) Copyright 2002
	3	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	4	* Marius Groeger <mgroeger@sysgo.de>
	5	*
	6	* Configuation settings for the LART board.
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
	27	#ifndef __CONFIG_H
	28	#define __CONFIG_H
	29
da27dcf0 WD	30	/*
	31	* High Level Configuration Options
	32	* (easy to change)
	33	*/
	34	#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
	35	#define CONFIG_LART 1 /* on an LART Board */
	36
	37	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	38
	39	/*
	40	* Size of malloc() pool
	41	*/
6d0f6bcf JCPV	42	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
6d0f6bcf JCPV	43	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
da27dcf0 WD	44
	45	/*
	46	* Hardware drivers
	47	*/
	48	#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
	49	#define CS8900_BASE 0x20008300
	50	#define CS8900_BUS16 1
	51
	52	/*
	53	* select serial console configuration
	54	*/
412ab705	55	#define CONFIG_SA1100_SERIAL
da27dcf0 WD	56	#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on LART */
	57
	58	/* allow to overwrite serial and ethaddr */
	59	#define CONFIG_ENV_OVERWRITE
	60
	61	#define CONFIG_BAUDRATE 9600
	62
da27dcf0	63
7f5c0157 JL	64	/*
	65	* BOOTP options
	66	*/
	67	#define CONFIG_BOOTP_BOOTFILESIZE
	68	#define CONFIG_BOOTP_BOOTPATH
	69	#define CONFIG_BOOTP_GATEWAY
	70	#define CONFIG_BOOTP_HOSTNAME
	71
	72
9bbb1c08 JL	73	/*
	74	* Command line configuration.
	75	*/
	76	#include <config_cmd_default.h>
	77
da27dcf0 WD	78
da27dcf0 WD	79	#define CONFIG_BOOTDELAY 3
53677ef1	80	#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
da27dcf0 WD	81	#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
	82	#define CONFIG_NETMASK 255.255.0.0
	83	#define CONFIG_IPADDR 172.22.2.131
	84	#define CONFIG_SERVERIP 172.22.2.126
	85	#define CONFIG_BOOTFILE "elinos-lart"
	86	#define CONFIG_BOOTCOMMAND "tftp; bootm"
	87
9bbb1c08	88	#if defined(CONFIG_CMD_KGDB)
da27dcf0 WD	89	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	90	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	91	#endif
	92
	93	/*
	94	* Miscellaneous configurable options
	95	*/
6d0f6bcf JCPV	96	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	97	#define CONFIG_SYS_PROMPT "LART # " /* Monitor Command Prompt */
	98	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	99	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	100	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	101	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
da27dcf0	102
6d0f6bcf JCPV	103	#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
6d0f6bcf JCPV	104	#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
da27dcf0	105
6d0f6bcf	106	#define CONFIG_SYS_LOAD_ADDR 0xc8000000 /* default load address */
da27dcf0	107
6d0f6bcf JCPV	108	#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
6d0f6bcf JCPV	109	#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */
da27dcf0 WD	110
da27dcf0 WD	111	/* valid baudrates */
6d0f6bcf	112	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
da27dcf0 WD	113
	114	/*-----------------------------------------------------------------------
	115	* Stack sizes
	116	*
	117	* The stack sizes are set up in start.S using the settings below
	118	*/
	119	#define CONFIG_STACKSIZE (1281024) / regular stack */
	120	#ifdef CONFIG_USE_IRQ
	121	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	122	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	123	#endif
	124
	125	/*-----------------------------------------------------------------------
	126	* Physical Memory Map
	127	*/
	128	#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
	129	#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
	130	#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
	131	#define PHYS_SDRAM_2 0xc1000000 /* SDRAM Bank #2 */
	132	#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
	133	#define PHYS_SDRAM_3 0xc8000000 /* SDRAM Bank #3 */
	134	#define PHYS_SDRAM_3_SIZE 0x00800000 /* 8 MB */
	135	#define PHYS_SDRAM_4 0xc9000000 /* SDRAM Bank #4 */
	136	#define PHYS_SDRAM_4_SIZE 0x00800000 /* 8 MB */
	137
	138
	139	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	140	#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
	141
6d0f6bcf	142	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
da27dcf0 WD	143
	144	/*-----------------------------------------------------------------------
	145	* FLASH and environment organization
	146	*/
6d0f6bcf JCPV	147	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	148	#define CONFIG_SYS_MAX_FLASH_SECT (31+8) /* max number of sectors on one chip */
da27dcf0 WD	149
da27dcf0 WD	150	/* timeout values are in ticks */
6d0f6bcf JCPV	151	#define CONFIG_SYS_FLASH_ERASE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Erase */
6d0f6bcf JCPV	152	#define CONFIG_SYS_FLASH_WRITE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Write */
da27dcf0	153
5a1aceb0	154	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	155	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
0e8d1586 JCPV	156	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
da27dcf0 WD	157
da27dcf0 WD	158	#endif /* __CONFIG_H */